|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet |
| 4 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead |
| 5 | Providing, fitting and fixing of undressed local timber (tooni, katus equivalent) in all types of frames complete. With locally available timber |
| 6 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with: all complete Decorative veneer facings of approved manufacture |
| 7 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
| 8 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 9 | Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 10 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 11 | Providing and Laying 40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring with floating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified. |
| 12 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 13 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)Wall |
| 14 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 15 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 100 mm dia. PRINCE / SUPREME or equivalent soil pipe 100 mm dia. Supreme / Prince |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm |
| 17 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 100 mm dia. PRINCE / SUPREME or equivalent soil pipe 75 mm dia. Supreme / Prince |
| 18 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm |
| 19 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE One wash basin with one pillar cock. 55 cm x 40 cm |
| 20 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size440x315x325 mm with 5 ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: Range of 1 Urinal basin. |
| 21 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable lockingarrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 500 LITERS CAPACITY |
| 22 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. MS 250x16mm Size M.S (Oxidized) |
| 23 | Providing, fitting and fixing. Tower bolt 100x10mm with necessary screw etc complete.M.S. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per erection of Engineer in Charge. Internal work - Exposed on wall15 mm nominal outer dia Pipes |
| 25 | Providing, Fitting and fixing brass fittings of approved quality and size complete: BIB COCK 15 MM DIA |
| 26 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA |
| 27 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 28 | Loading and unloading of Cement or Steel by manual means and stacking. |
| 29 | Cost of haulage excluding loading and unloading- Surfaced road:-Non-stock & stock materials. |
| 30 | Ceiling Fan 1200mm 48\" (Havells/USHA) Confirming to IS:374 |
| 31 | Ventilating fans 250mm 10\" (Havells) |
| 32 | LED Tube Lights Batten Confirming to IS: 16102 Led Tube Light Neptune Silver 20 Watt |
| 33 | Electronics Fan Regulator(EME) Deluxe 120/280V |
| 34 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 35 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 36 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 100 mm X 100 mm X 60 mm deep |
| 37 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 180 mm X 100 mm X 60 mm deep |
| 38 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch |
| 39 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 A socket outlet |
| 40 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 A switch |
| 41 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet |
| 42 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cableetc. as required |
| 43 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required |
| 44 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 45 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 46 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door |
| 47 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 48 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (16A) |