Supply, Installation, Trial Run And Commissioning Of 50Hp Submersible Horizontal Mounting Axial Flow Pump Sets In Vellayani Kayal Padasekharams, Kalliyur Panchayat In Thiruvananthapuram District Of Kerala With Prime Mover, Delivery Line, Panel Board , Kalliyur, Trivandrum-Kerala

Supply, Installation, Trial Run And Commissioning Of 50Hp Submersible Horizontal Mounting Axial Flow Pump Sets In Vellayani Kayal Padasekharams, Kalliyur Panchayat In Thiruvananthapuram District Of Kerala With Prime Mover, Delivery Line, Panel Board Supply, Installation, Trial Run And Commissioning Of 50Hp Submersible Horizontal Mounting Axial Flow Pump Sets In Vellayani Kayal Padasekharams, Kalliyur Panchayat In Thiruvananthapuram District Of Kerala With Prime Mover, Delivery Line, Panel Board , Supply, Installation, Testing, Trial Run And Commissioning Of Submersible Horizontal Mounting Axial Flow Pump Set With The Specifications Listed Below, Suitable For Handling Brackish And Silty Water With Rpm 960 ( Syn ) Or Less. The Material Of Construction Of The Casing, Suction Bell Shall Be Cifg 260 With 2% Nici, Impeller Cf8m ( Ss ) With Ss 316 Or Asi 410 Shaft, Vertical Delivery Pipe Should Be Of Ss 304 And Horizontal Delivery Pipe ( Varies From 5 To 10 M Length As Per Site Conditions ) Of Ms ( Is 226 ) With 6 Mm Minimum Thickness. A Metallic Non- Corrosive Strainer Of Mesh Size Not More Than 50 Mm X 50 Mm Should Be Fitted At Mouth Of Suction Column. Any Hanging Portion Of The Delivery Pipe Should Be Supported With Suitable Metallic Supporting Frames Or Rcc Pillars Of Suitable Size As Per Site Requirements. The Prime Mover For The Pump Should Be 3 Phase Tewc Squirrel Cage Submersible Induction Motor 415 V + / - 10%, 50 Hz + / - 5% Connection With Class “F” Insulation, Cubicle Type Panel Board With All Necessary Protection Units And Instrumentation. Auto Transformer Starter Of Reputed Make , Mccb Including Suitable Metering, Led Indications, Selector Switch, Single Phase And Dry Running Preventer, Suitable Capacitor Etc., Wiring And Earthing Should Be As Per Regulations And Specifications Of Kseb And Electrical Inspectorate. Suitable Water Proof, Copper Power Cable, About 20.00 M Length Or As Per Site Requirement. A Screen With 6 Mm Gi Welded Mesh With 50 Mm X 50 Mm Opening Size, ( About 20 Sq M Area ) Framed In Gi Angles And Gi Tubes Shall Be Fitted At The Openings On Top And Sides Of Sump To Prevent Entry Of Unwanted Materials To The Pump Through Inflow Water. , Duty Point Head ( M ) : 3.5 Minimum Discharge At Duty Point Head ( Lps ) : 750 Minimum Overall Efficiency ( % ) Duty Point Head: 70 Capacity Of Prime Mower: 50 Hp , The Rate Quoted Should Inclusive All The Charges For Supply, Installation Including Petty Civil Works, Trial Run And Commissioning, All Type Of Transportation And Conveyance, Loading And Unloading Charges, Gst, Factory Testing Etc.

INR 3000 /-

INR 20000.0 /-

INR 20 Lakhs /-