|
| 1 | Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make / type / size (horizontal / vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair / replacement of defective / worn-out / unserviceable components / parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering / brazing of the inner copper tank and replacement of defectiveworn out unserviceable components / parts (new components / parts shall be measured and paid separately as supply only herein after) & re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge. |
| 2 | Note -Employing skilled electrician and helpers required with necessary tools, safety equipment\"s for attending geyser complaint as directed by EIC. |
| 3 | Supply only Heating element 1.5 KW as per sample suitable geyser of any capacity. |
| 4 | Supply only Heating element 2 KW as per sample suitable geyser of any capacity. |
| 5 | Supply only heating elements 3 KW as per sample suitable for geyser of any capacity |
| 6 | Supply only Thermostat switch 230 volts, 50 Hz AC suitable for geysers of any capacity geyser. |
| 7 | Supply only Fiber reinforced PVC nylon pipe (Flexi connection pipe) heavy duty size 450 mm long15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS. |
| 8 | Supply onlyBase assembly (separator) suitable for 25 / 50litre capacity of geyser as per existing make, size and type with holding clamp with nut bolts, washer and rubber gasket for element and thermostat and otheraccessories as required at site etc. complete all as specified and directed |
| 9 | Supply only heavy duty pin type fastener 4\" long (GI nuts & bolts and washers off sizes) suitable for any capacity geyser as required at site. |
| 10 | Supply only Stainless steel tank and rated pressure not less than 7 kg / sqcm etc as perexisting size, shape, make suitable for 50 litres geysers. |
| 11 | Supply only Stainless steel tank and rated pressure not less than 7 kg / sqcm etc as perexisting size, shape, make suitable for 25 litres geysers. |
| 12 | Supply only indicator lamp as per existing shape and size suitable for 25 / 50 litres capacity of geyser etc complete as specified and directed |
| 13 | Supply only Metallic fusable plug of existing make / type / size suitable for geyser any capacity. |
| 14 | Supply onlyRubber ring gasket superior quality made out rubber having holes to suit the hole of base plate suitable for any capacity geysers |
| 15 | Supply only PVC insulated, PVC sheathed copper conductor cable of size 2.5 Sqmm, 3 core, flexible, round type for geyser any capacity, length 1 metre approx. complete. |
| 16 | Supply only three pin plug top ISI marked of capacity 15/16A, 230 volts |
| 17 | Supply only safety valve ISI marked for any make of geyser, complete all as specified and approved by EIC. |
| 18 | supply only bottom cover made out of MS sheet 20 gauge as per existing size & hole inch machine screws suitable for 25/50 litre geyser of any make and type |
| 19 | Note for Item No 1 to 17:-Geysers installed at site of make Recold / Bajaj / Usha / Havells / Jaquar, Make of spear part for item No 2 to 17 shall be of make as recommended by OEM and as approved by Engineer-in- Charge. |
| 20 | M&L for painting of geyser 25 Litres after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting machineto achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2 cm high )complete all as specified & directed. |
| 21 | M&L for painting of geyser 50 Litres after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting machineto achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2 cm high )complete all as specified & directed. |
| 22 | Supply and fix storage type water heater 5 star rated, 50 litres capacity vertical wall mounting type made out of CRCA outer body, stainless steel storage tank, titanium enamelled heating element, thermostat, thermal cut-out, insulation, water connections with 15 mm size & 450 mm long armoured flexible connection pipe for hot & cold water, electrical connectionwith 2.5 Sqmm 3 core copper (multistranded) cable with top indicator plug top 15 amp from geyser connection to socket, fasteners for fixing of new geyser and writing the MES No including taking down old unserviceable geyser & deposited in MES store yard etc complete as specified and directed by EIC. Make Havells (Monza turbo) or equivalent of make Racold / Jaguar |
| 23 | Supply and fix storage type water heater 5 star rated, 25 litres capacity vertical wall mounting type made out of CRCA outer body, stainless steel storage tank, titanium enamelled heating element, thermostat, thermal cut-out, insulation, water connections with 15 mm size & 450 mm long armoured flexible connection pipe for hot & cold water, electrical connectionwith 2.5 sqmm 3 core copper (multistranded) cable with top indicator plug top 15 amp from geyser connection to socket, fasteners for fixing of new geyser and writing the MES No including taking down old unserviceable geyser & deposited in MES store yard etc. complete as specified and directed by EIC. Make Havells (Monza turbo) or equivalent of make Racold / Jaguar |
| 24 | S&F in repair sheet metal enclosure single pole and neutral with 2 pin earth metal plug and socket with one single pole MCB 20 A, 230 volts etc complete as specified and directed |
| 25 | S&F in repair metal clad industrial plug & socket 2 pole + earth 230 volts 20 A etc complete as specified and directed |
| 26 | S&F in repair MCB single pole 240 volts ISI marked of capacity 20 Amps `C\" series etc complete as specified and directed |
| 27 | S&F in repair MCB single pole and neutral 240 volts ISI marked of capacity 40 to 63 Amps C; series etc. complete as specified and directed |
| 28 | S&F in repair switch socket combination, universal type 2 in 1, 5 cum16 Amp flush type ISI marked, 230 V etc complete as specified and directed |
| 29 | S&F in repair socket out let 2 in 1, 3 pin 5 Amps flush type 240 volts ISI marked etc complete as specified and directed |
| 30 | S&F in repair piano switch flush type single pole one way 5 Amps , ISI, fan / light marked 240 volts etc complete as specified and directed by EIC |
| 31 | S&F in repair pvc gang box 2 in 1, 3 pin, 6 Amps switch socket combination suitable for 230 volts etc complete as specified and directed |
| 32 | S&F in repair PVC gang box 2 in 1, 5 pin, 16 Amps switch socket combination suitable for 230 volts etc complete as specified and directed |
| 33 | Supply and fixing 1100 volts grade heavy duty cable pvc insulated stranded aluminium conductor of size 10 sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4 mm galvanised iron suspension wire complete. |
| 34 | Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust / dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts inits original location and hanging connecting and testing ceiling fan for smooth functioning incl replacement of rubber real insulator and painting with one coat of synthetic enamel paint with spray painting machine & markingMES No. with black paint complete.Note : (i) Bearing, bush, condenser, insulated cable and other Spare parts if found defective will be replaced with new one and measured and paid separately as supply only vide item No 34 to 37 of this BOQ and rewinding of fan will be measured vide item No 38 of this BOQ |
| 35 | Supply only fan capacitor 2.5 / 3.15 mfd suitable for 240 volts etc complete as specified and directed by EIC. |
| 36 | Supply only ball bearing of ceiling fan (size 48\"\" / 56\"\" / 60\"\") of exactly similar as existing in fan complete all as specified and directed.MAKE :NBC / SKF / TATA |
| 37 | Supply only gun metal bush of ceiling fan (size 48\"\" / 56\"\" / 60\"\") of exactly similar as existing in fan complete all as specified and directed.MAKE :NBC / SKF / TATA |
| 38 | Supply only ceiling fan blade of 1200 / 1400 mm sweep as per sample complete all as specified and directed. |
| 39 | M&L for rewinding of Ceiling Fan any make of 1200 / 1400 mm sweep with super enamelled copper wire (gauge/weight of copper coils shall be same as per existing dismantled fans), including varnishing & heating, testing etc. complete all as specified and directed by Engineer-in-Charge complete all as specifiedand directed. |
| 40 | Taking down carefully exhaust fan / wall fan / pedestal fan / table fan any sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust / dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts inits original location and hanging connecting and testing ceiling fan for smooth functioning and painting with one coat of synthetic enamel paint with spray painting machine & markingMES No. with black paint complete.Note : (i) Bearing, bush, condenser, insulated cable and other Spare parts if found defective will be replaced with new one and measured and paid separately as supply only vide item No 40 to 42 of this BOQ and rewinding of fan will be measured vide item No 43 to 44 of this BOQ |
| 41 | Supply only fan capacitor 4 / 6 mfd suitable for 240 volts etc complete as specified and directed by EIC. |
| 42 | Supply only ball bearing of exhaust fan (size 18\"\"/15\"\"/12\"\") of exactly similar as existing in fan complete all as specified and directed.MAKE :NBC / SKF / TATA |
| 43 | Supply only gun metal bush of exhaust fan (size 18\"\"/15\"\"/12\"\") of exactly similar as existing in fan complete all as specified and directed.MAKE :NBC / SKF / TATA |
| 44 | M&L rewinding of exhaust Fan of18 inch/ 15 inchsweep any make with super enamelled copper wire (gauge/weight of copper coils shall be same as per existing dismantled fans), including varnishingcomplete all as specified and directed by Engineer-in-Charge complete all as specifiedand directed. |
| 45 | M&L rewinding of exhaust Fan of9 inch/ 12 inch sweep size of fans of any make with super enamelled copper wire (gauge/weight of copper coils shall be same as per existing dismantled fans), including varnishingcomplete all as specified and directed by Engineer-in-Charge complete all as specifiedand directed. |
| 46 | Supply and fix in repair PVC sheathed white colour three core copper conductor flexible cable of size 1.5 Sqm for connecting ceiling fan / exhaust fan from ceiling rose complete all as specified & directed . |
| 47 | Supply and fix in repair mild steel louvers of size 450 mm to 300 mm sweep of exhaust fanetc. complete as specified and directed |
| 48 | Supply and fix non metallic plastic body, exhaust fan 250 / 300 mm sweep suitable for 230 volts including taking down old unserviceable fan & deposited in MES store yard complete as specified and directed by EIC |
| 49 | Supply and fix heavy duty exhaust fan 300 mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms including taking down old unserviceable fan & deposited in MES store yard complete as specified and directed by EIC. |
| 50 | Supply and fix in repair heavy duty exhaust fan 450 mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms including taking down old unserviceable fan & deposited in MES store yard etc complete as specified and directed by EIC |
| 51 | Supply and fix heavy duty exhaust fan 600 mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms including taking down old unserviceable fan & deposited in MES store yard complete as specified and directed by EIC. |
| 52 | Supply and fix wall fan 400 mm sweep with all accessories as per manufacturer norms including taking down old unserviceable fan & deposited in MES store yard etc complete as specified and directed by EICMake:- Havell - Model Platina HS or equivalent model of make Usha / Khetan / crompton |
| 53 | Supply and fix in repair ceiling fan 1200mm sweep with all accessories as per manufacturer norms andunserviceable fan deposited in MES store yard etc complete as specified and directed by EIC |
| 54 | S&F in repair electronic fan regulator stepped, flush type fixed on existing laminated sheet etc complete as specified and directed by EIC |
| 55 | S&F industrial emergency call bell suitable for 240 volts with all accessories as per manufacturer norms etc complete as specified and directed |
