}

Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of P, Pampore-Jammu And Kashmir

Public Health Engineering Department has published Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of P. Submission Date for this Tender is 02-09-2021. Rough Finishing Tools Tenders in Pampore Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

28755777
Corrigendum : Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of P
Open Tender
Indian
Jammu And Kashmir
Pampore
02-09-2021

Tender Details

Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore-1 Repairs To Multi Stage Bowl Vt Pump Of Bowl Having Inside Diameter 150-250Mm And Above.Dismantling Of The Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 2 Line Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 3 Head Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 4 Rubber Liner Cente Kit Bush 5 Muff Coupling ( Finished ) Out Of Ss-400 Material As Per Sample 6 Gun Metal Gland Bush ( Finished ) As Per Sample 7 Ms Gland ( Finished ) As Per Sample 8 Facing / Treatment Of Bowel Stage And Impeller For Proper Fitment Of Wearing Ring 9 Gm Wearing Ring ( Finished ) As Per Sample 10 Cooling Ring ( Finished ) As Per Sample 11 Repairs To Gland Box By Way Of Removing Of Damaged Studs And Providing And Fitting Of New Studs As Per Sample 12 Re-Matteling Of Bearing Seats And Coupling Seat Then Turing And Finishing To Size And Shape 13 Check Nut ( Finished ) As Per Sample 14 Ball Bearing No: As Per Sample After Removing Old Damaged Bearing By Skilled Labours And Tools / Tackles. 15 Cost Of Scrap Copper Dismattled Windings 16 Repairs To Vt Motor With Rating From 10Hp To 50Hpdismantling Of The Vt Motor At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 17 Cost On Account Of Associated / Consumable Items Like Crimpled Paper, Sleeves, Pvc Paper, Bamboo Sticks, Thread, Varnish Etc 18 Copper Wire Used In Rewinding The Motor. 19 Replacement Of Bearing 20 Rewinding Charges 21 Cost Of Scrap Of Copper 22 Repairs To Horizontal Pump With Discharge ( From And Above 40000Gph But Less Than 60000 Gph ) And Head ( From And Above 40M To 45M ) Dismantling Of The Horizontal Pumpat Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 23 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 24 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 25 Fabrication Providing And Fitting Of Split Type Ms Gland ( Finished ) 26 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 27 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 28 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 29 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 30 Providing And Fitting Of Metallic Palmative Packing 31 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 32 Fabrication And Fiting Of Chuck Nut As Per Sample 33 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 34 Repairs To Horizontal Pump With Discharge ( From And Above 60000Gph But Less Than 75000 Gph ) And Head ( From And Above 40M To 45M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 35 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 36 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 37 Fabrication Providing And Fitting Of Split Type Ms Gland ( Finished ) 38 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 39 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 40 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 41 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 42 Providing And Fitting Of Metallic Palmative Packing 43 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 44 Fabrication And Fiting Of Chuck Nut As Per Sample 45 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 46 Repairs To Horizontal Pump With Discharge ( From And Above 60000Gph But Less Than 75000 Gph ) And Head ( From And Above 40M To 45M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 47 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 48 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 49 Fabrication Providing And Fitting Of Split Type Ms Gland ( Finished ) 50 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 51 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 52 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 53 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 54 Providing And Fitting Of Metallic Palmative Packing 55 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 56 Fabrication And Fiting Of Chuck Nut As Per Sample 57 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 58 Repairs To Horizontal Split Case ( Double Stage ) Pump With Discharge Of 20000Gph Head 90M Dismantling Of The Horizontal Split Case Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 59 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 60 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 61 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 62 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 63 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 64 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 65 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 66 Providing And Fitting Of Metallic Palmative Packing 67 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 68 Fabrication And Fiting Of Chuck Nut 69 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 70 Repairs To Horizontal Pump With Discharge ( From And Above 4000Gph But Less Than 8000 Gph ) And Head ( From And Above 30M But Less Than 80M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 71 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 72 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 73 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 74 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 75 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 76 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 77 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 78 Providing And Fitting Of Metallic Palmative Packing 79 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 80 Fabrication And Fiting Of Chuck Nuy As Per Sample 81 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 82 Repairs To Horizontal Pump With Discharge ( From And Above 4000Gph But Less Than 1500 Gph ) And Head ( From And Above 50M But Less Than 150M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 83 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 84 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 85 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 86 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 87 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 88 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 89 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 90 Providing And Fitting Of Metallic Palmative Packing 91 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 92 Fabrication And Fiting Of Chuck Nuy As Per Sample 93 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 94 Repairs To Horizontal Pump With Discharge Repairs To Horizontalmulti Stage Pump With Discharge Of 8000 Gph Head 200M Dismantling Of The Horizontal Split Case Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 95 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 96 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 97 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 98 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 99 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 100 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 101 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 102 Providing And Fitting Of Metallic Palmative Packing 103 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 104 Fabrication And Fiting Of Chuck Nuy As Per Sample 105 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 106 Providing And Filling Of M-Oil For Bearing Housing 107 Repairs To Submeribsle Pump With Discharge ( From And Above 2000Gph But Less Than 4500 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 108 Replacement Of Impeller 109 I. Bronze 110 Ii. Cast Steel / Stainless Steel. 111 Iii. Noryl 112 Replacement Of Diffuser 113 I. Bronze 114 Ii. Cast Steel / Stainless Steel. 115 Iii. Noryl 116 Replacement Of Pump Bowl 117 Fabrication, Providing And Fitting Of Pump Shaft 118 Replacement Of Cast Iron Non Return Valve Shaft 119 Replacement Of Stain Less Steel Strainers 120 Replacement Of Cast Iron Threaded Discharge Outlet 121 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 122 I. Bronze 123 Ii. Cast Steel / Stainless Steel. 124 Iii. Nitryl Rubber 125 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 126 A. 50 Mm Dia 127 B. 65 Mm Dia 128 C. 80 Mm Dia 129 D. 100 Mm Dia 130 Fabrication, Providing And Fitting Of Locking Arrangment 131 Repairs To Submeribsle Pump With Discharge ( From And Above 2000Gph But Less Than 4500 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 132 Replacement Of Impeller 133 I. Bronze 134 Ii. Cast Steel / Stainless Steel. 135 Iii. Noryl 136 Replacement Of Diffuser 137 I. Bronze 138 Ii. Cast Steel / Stainless Steel. 139 Iii. Noryl 140 Replacement Of Pump Bowl 141 Fabrication, Providing And Fitting Of Pump Shaft 142 Replacement Of Cast Iron Non Return Valve Shaft 143 Replacement Of Stain Less Steel Strainers 144 Replacement Of Cast Iron Threaded Discharge Outlet 145 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 146 I. Bronze 147 Ii. Cast Steel / Stainless Steel. 148 Iii. Nitryl Rubber 149 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 150 A. 50 Mm Dia 151 B. 65 Mm Dia 152 C. 80 Mm Dia 153 D. 100 Mm Dia 154 Fabrication, Providing And Fitting Of Locking Arrangment 155 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 8000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 156 Replacement Of Impeller 157 I. Bronze 158 Ii. Cast Steel / Stainless Steel. 159 Iii. Noryl 160 Replacement Of Diffuser 161 I. Bronze 162 Ii. Cast Steel / Stainless Steel. 163 Iii. Noryl 164 Replacement Of Pump Bowl 165 Fabrication, Providing And Fitting Of Pump Shaft 166 Replacement Of Cast Iron Non Return Valve Shaft 167 Replacement Of Stain Less Steel Strainers 168 Replacement Of Cast Iron Threaded Discharge Outlet 169 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 170 I. Bronze 171 Ii. Cast Steel / Stainless Steel. 172 Iii. Nitryl Rubber 173 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 174 A. 50 Mm Dia 175 B. 65 Mm Dia 176 C. 80 Mm Dia 177 D. 100 Mm Dia 178 Fabrication, Providing And Fitting Of Locking Arrangment 179 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 8000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 180 Replacement Of Impeller 181 I. Bronze 182 Ii. Cast Steel / Stainless Steel. 183 Iii. Noryl 184 Replacement Of Diffuser 185 I. Bronze 186 Ii. Cast Steel / Stainless Steel. 187 Iii. Noryl 188 Replacement Of Pump Bowl 189 Fabrication, Providing And Fitting Of Pump Shaft 190 Replacement Of Cast Iron Non Return Valve Shaft 191 Replacement Of Stain Less Steel Strainers 192 Replacement Of Cast Iron Threaded Discharge Outlet 193 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 194 I. Bronze 195 Ii. Cast Steel / Stainless Steel. 196 Iii. Nitryl Rubber 197 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 198 A. 50 Mm Dia 199 B. 65 Mm Dia 200 C. 80 Mm Dia 201 D. 100 Mm Dia 202 Fabrication, Providing And Fitting Of Locking Arrangment 203 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 204 Replacement Of Impeller 205 I. Bronze 206 Ii. Cast Steel / Stainless Steel. 207 Iii. Noryl 208 Replacement Of Diffuser 209 I. Bronze 210 Ii. Cast Steel / Stainless Steel. 211 Iii. Noryl 212 Replacement Of Pump Bowl 213 Fabrication, Providing And Fitting Of Pump Shaft 214 Replacement Of Cast Iron Non Return Valve Shaft 215 Replacement Of Stain Less Steel Strainers 216 Replacement Of Cast Iron Threaded Discharge Outlet 217 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 218 I. Bronze 219 Ii. Cast Steel / Stainless Steel. 220 Iii. Nitryl Rubber 221 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 222 A. 50 Mm Dia 223 B. 65 Mm Dia 224 C. 80 Mm Dia 225 D. 100 Mm Dia 226 Fabrication, Providing And Fitting Of Locking Arrangment 227 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 228 Replacement Of Impeller 229 I. Bronze 230 Ii. Cast Steel / Stainless Steel. 231 Iii. Noryl 232 Replacement Of Diffuser 233 I. Bronze 234 Ii. Cast Steel / Stainless Steel. 235 Iii. Noryl 236 Replacement Of Pump Bowl 237 Fabrication, Providing And Fitting Of Pump Shaft 238 Replacement Of Cast Iron Non Return Valve Shaft 239 Replacement Of Stain Less Steel Strainers 240 Replacement Of Cast Iron Threaded Discharge Outlet 241 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 242 I. Bronze 243 Ii. Cast Steel / Stainless Steel. 244 Iii. Nitryl Rubber 245 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 246 A. 50 Mm Dia 247 B. 65 Mm Dia 248 C. 80 Mm Dia 249 D. 100 Mm Dia 250 Fabrication, Providing And Fitting Of Locking Arrangment 251 Providing And Applying Of Grease 252 Repairs To The Non-Rising Spindle Sluice Valve Of Size 65Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 253 Dismantling The Sluive Valve For Checking Inner Parts 254 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 255 Fabrication, Providing And Fitting Of Check Nut As Per Sample 256 Fabrication, Providing And Fitting Of Flap 257 Cost On Account Of C.I. Welding 258 Repairs To The Reflex Valve ( Nrv ) Of Size 65 Mmdiameter By Way Of Using Dg Set And Welding At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 259 Dismantling The Reflexvalve For Checking Inner Parts 260 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 261 Making Of Flap Seat To Make It Proper Effective 262 Providing And Fitting Of Jain As Per Sample 263 Providing And Fitting Of Nuts And Bolts As Required 264 Making Of Hings For Perfect Movement Of The Flap 265 Making And Fitting Of Hinge Spindle As Per Sample 266 Repairs To The Rising Main For Plugging The Openings / Cracks Etc. By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Works. 267 Cost On Account Of Making Proper Groove To The Leak Spot By Using Grinder At Site. 268 Cost On Account Of Providing Of Ms Plate As Required At Site 269 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 270 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 271 Repairs To The Non-Rising Spindle Sluice Valve Of Size 80Mm And 100 Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 272 Dismantling The Sluive Valve For Checking Inner Parts 273 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 274 Fabrication, Providing And Fitting Of Check Nut As Per Sample 275 Fabrication, Providing And Fitting Of Flap 276 Cost On Account Of C.I. Welding 277 Repairs To The Non-Rising Splidle Sluice Valve Of Size 125Mm And 150 Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 278 Dismantling The Sluive Valve For Checking Inner Parts 279 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 280 Fabrication, Providing And Fitting Of Check Nut As Per Sample 281 Fabrication, Providing And Fitting Of Flap 282 Cost On Account Of C.I. Welding 283 Repairs To The Non-Rising Spindle Sluice Valve Of Size More Than 150 Mm Diameter Includingfollowing Series Of Worksdismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 284 Dismantling The Sluice Valve For Checking Inner Parts 285 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 286 Fabrication, Providing And Fitting Of Check Nut As Per Sample 287 Fabrication, Providing And Fitting Of Flap 288 Cost On Account Of C.I. Welding 289 Repairs To The Reflex Valve ( Nrv ) Of Size 80Mm And 100Mmdiameter By Way Of Using Dg Set And Welding At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 290 Dismantling The Reflexvalve For Checking Inner Parts 291 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 292 Making Of Flap Seat To Make It Proper Effective 293 Providing And Fitting Of Jain As Per Sample 294 Providing And Fitting Of Nuts And Bolts As Required 295 Making Of Hings For Perfect Movement Of The Flap 296 Making And Fitting Of Hinge Spindle As Per Sample 297 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 298 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 299 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 300 Repairs To The Reflex Valve ( Nrv ) Of Size 125Mm And 150Mm Diameter By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 301 Dismantling The Reflex Valve For Checking Inner Parts 302 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 303 Making Of Flap Seat To Make It Proper Effective 304 Providing And Fitting Of Jain As Per Sample 305 Providing And Fitting Of Nuts And Bolts As Required 306 Making Of Hings For Perfect Movement Of The Flap 307 Making And Fitting Of Hinge Spindle As Per Sample 308 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 309 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 310 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 311 Repairs To The Reflex Valve ( Nrv ) Of Size More Than 150Mmdiameter By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Worksdismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 312 Dismantling The Reflex Valve For Checking Inner Parts 313 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 314 Making Of Flap Seat To Make It Proper Effective 315 Providing And Fitting Of Jain As Per Sample 316 Providing And Fitting Of Nuts&&Bolts As Required 317 Making Of Hings For Perfect Movement Of The Flap 318 Making And Fitting Of Hinge Spindle As Per Sample 319 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 320 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 321 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 322 Repairs To The Foot Valve Of Size 80Mm To 150 Mm Diameter Including Following Series Of Worksdismantling Of The Foot Valve From The Suction Line And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 323 Dismantling The Foot Valve For Checking Inner Parts 324 Making Of Hings For Perfect Movement Of The Flap 325 Making And Fitting Of Hinge Spindle As Per Sample 326 Cost On Account Of Fabrication, Providing And Fitting Of Strainer Of Proper Size 327 Cost On Account Of Providing And Fitting Of Nuts And Bolts 328 Providing And Fitting Of Rubber Washers 5Mm Thick Compatible For 329 65Mm Dia Pipe Flange 330 80Mm Dia Pipe Flange 331 100Mm Dia Pipe Flange 332 125Mm Dia Pipe Flange 333 150Mm Dia Pipe Flange 334 200Mm Dia Pipe Flange 335 250Mm Dia Pipe Flange 336 Providing And Fitting Of G. I. Bends With Flanges Compatible For 337 65Mm 338 80Mm 339 100Mm 340 125Mm 341 150Mm 342 200Mm 343 250Mm 344 Providing And Fitting Of Table-5 / Table-17M S Flange ( As Per Requirement ) Compatible For 345 65Mm Dia Pipe 346 80Mm Dia Pipe 347 100Mm Dia Pipe 348 125Mm Dia Pipe 349 Providing And Fitting Of Side Thrust Bearing For Different Capacity Open Well Submersible Pumping Units ( Horizontal Type ) Compatible For 350 7.5Hp - 10 Hp 351 10Hp - 15 Hp 352 20 Hp - 50 Hp 353 Providing And Fitting Of Bush Bearing ( De & Nde ) For Different Capacity Open Well Submersible Horizontal Type Pumping Units Compatible For 354 7.5Hp - 10 Hp 355 10Hp - 15 Hp 356 20 Hp - 50 Hp 357 Providing And Fitting Of Ball / Thrust Bearing ( De & Nde ) For Different Capacity Motors And Pumps Compatible For 358 No. 6308 359 No. 6309 360 No. 6312 361 No. 6306 362 No. 3206 Double Groove 363 No. 6208 364 No. 6311 365 No. 6316 366 No. 6318 367 No. 6211 368 No. 6310 369 No. 6212 370 No. 6305 371 No. 6307 372 No. 6212 373 No. 6305 374 No. 7312 375 No. 6307 376 Providing And Fitting Of Bearing Housings With Gaskets For Different Capacity Motors And Pumps Compatible For 377 No. 6308 378 No. 6309 379 No. 6312 380 No. 6306 381 No. 3206 Double Groove 382 No. 6208 383 No. 6311 384 No. 6316 385 No. 6318 386 No. 6211 387 No. 6310 388 No. 6212 389 No. 6305 390 No. 6307 391 No. 6212 392 No. 6305 393 No. 7312 394 No. 6307 395 Welding In Single Beat At Various Ms Structural Joints Viz, Gantry Joint, Column Joint, Gate Joint, Sheet Joint, Fencing Joint Etc. 396 Replacement Of Gravity To Various Batteries With Charging 397 Providing And Fitting Of Ms Flange Couplings Including Boring And Finishing As Per Requirement. 398 Fc-010 399 Fc-011 400 Fc-012 401 Fc-013 402 Fc-014 403 Fc-015 404 Fc-016 405 Fc-017 406 Fc-018 407 Fc-019 408 Providing And Shrouding Of Pea Gravel 5Mm 409 Providing And Shrouding Of Pea Gravel 6Mm 410 Balancing Ring For Ows Pumping Units 411 Providing And Fitting Of Ball Valves Of Following Capacities 412 12Mm 413 15Mm 414 25Mm 415 Repairs / Replacements Of Chain Pulley Block And Successful Testing Of Following Capacities 416 01 Ton 417 02 Ton 418 03 Ton 419 05 Ton 420 Providing And Fitting Of Asbestos Gland Packing Of Superior Quality 421 8.5 Mm 422 10 Mm 423 12 Mm 424 16 Mm 425 Providing And Fitting Of Tyre / Rubber Couplings Of Superior Quality 426 Tc-06- Tc 10 427 Tc-010 - Tc 15 428 Tc-016-17 429 Tc-018-20 430 Tc-020 To 22 431 Providing And Fitting Of Suction Meshed Strainer For Bowl Dia 432 100Mm 433 125Mm 434 150Mm 435 200Mm 436 250Mm 437 300Mm 438 Providing And Fitting Of Star Couplings Of Superior Quality 439 Assorted Size 440 Repairs To Ms / Gi Rising Main At Damaged Joints By Way Of Excavaton Of Trunches, Cutting Of Both Damaged Flanges, Providing And Fitting Of Socket In Two Halves One From Above And Other On Top By Welding In Two Beats Using Welding, Cutting, Dg Set Along The Contour Of The Rising Main For Making The Leak Proof Solid Joint 441 65Mm 442 80Mm 443 100Mm 444 125Mm 445 150Mm 446 200Mm 447 250Mm 448 300Mm 449 Repairs To Open Well Submersible Pumping Unit With Discharge From 3000Gph To 10000 Gph, Head From And Above 10M But Less Than 52M 450 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 451 Replacement Of Stain Less Steel Shaft 452 Replacement Of Cast Iron Impeller 453 Replacement Of Cast Iron Volute Casing 454 Providing And Fitting Of Bushes / Bearing 455 Providing And Fitting Of Stainless Steel Thrust Pad 456 Providing And Fitting Ofstrainer 457 Repairs To Open Well Submersible Pumping Unit With Discharge From 3000Gph To 10000 Gph, Head From And Above 30M But Less Than 100M 458 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 459 Replacement Of Stain Less Steel Shaft 460 Replacement Of Cast Iron Impeller 461 Replacement Of Cast Iron Volute Casing 462 Providing And Fitting Of Bushes / Bearing 463 Providing And Fitting Of Stainless Steel Thrust Pad 464 Providing And Fitting Ofstrainer 465 Replacement Of Damaged Control Valves From The Suction / Delivery Line And Providing / Fitting Of Di Sluice Valves Flanged With Pn Rating 16 As Per Following Dia’S Including Transportation, And Suitable Size Nuts And Bolts And Testing On Load At Site. 466 65Mm 467 80Mm 468 100Mm 469 125Mm 470 150Mm 471 200Mm 472 Replacement Of Damaged Control Valves From The Suction / Delivery Line And Providing / Fitting Of Di Non Return Valves Flanged With Pn Rating 16 As Per Following Dia’S Including Transportation, And Suitable Size Nuts And Bolts And Testing On Load At Site . 473 65Mm 474 80Mm 475 100Mm 476 125Mm 477 150Mm 478 200Mm 479 Providing / Fitting Of Gi Flanged Pipe / Column Pipe G I Class-B, Both Sides Flanged With Table-5 Flanges As Per Size 480 65Mm 481 80Mm 482 100Mm 483 125Mm 484 150Mm 485 M-Oil Change Including Providing / Fitting Of M-Oil , Replacement Of Filters Up To 25Kva To 40 Kva Dg Set 486 M-Oil Change Including Providing / Fitting Of M-Oil , Replacement Of Filters 45Kva To 62.5Kva Dg Set 487 M-Oil Change And Coolant Including Providing / Fitting Of M-Oil , Replacement Of Filters 62.5Kva To 100Va Dg Set 488 M-Oil Change And Coolant Including Providing / Fitting Of M-Oil , Replacement Of Filters 125Kva To 150Va Dg Set

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 27-08-2021 Corrigendum 05 Date 02-09-2021

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail