Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Qazigund- 1 Repairs To Horizontal Pump With Discharge ( From And Above 5000Gph But Less Than 8000 Gph ) And Head ( From And Above 30M But Less Than 80M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 2 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 3 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 4 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 5 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 6 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 7 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 8 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 9 Providing And Fitting Of Metallic Palmative Packing 10 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 11 Fabrication Providing And Fitting Of G M Chuck Nut And Locking Ring, As Per Sample. 12 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 13 Repairs To Horizontal Pump With Discharge ( From And Above 8000Gph But Less Than 16000 Gph ) And Head ( From And Above 30M But Less Than 50M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 14 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 15 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 16 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 17 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 18 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 19 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 20 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 21 Providing And Fitting Of Metallic Palmative Packing 22 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 23 Fabrication Providing And Fitting Of G M Chuck Nut And Locking Ring, As Per Sample. 24 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 25 Repairs To Submeribsle Pump With Discharge ( From And Above 1000Gph But Less Than 3000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 26 Replacement Of Impeller I. Bronze 27 Ii. Cast Steel / Stainless Steel. 28 Iii. Noryl 29 Replacement Of Diffuser I. Bronze 30 Ii. Cast Steel / Stainless Steel. 31 Iii. Noryl 32 Replacement Of Pump Bowl 33 Fabrication, Providing And Fitting Of Pump Shaft 34 Replacement Of Cast Iron Non Return Valve Shaft 35 Replacement Of Stain Less Steel Strainers 36 Replacement Of Cast Iron Threaded Discharge Outlet 37 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 38 Ii. Cast Steel / Stainless Steel. 39 Iii. Nitryl Rubber 40 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 41 B. 65 Mm Dia 42 C. 80 Mm Dia 43 D. 100 Mm Dia 44 Fabrication, Providing And Fitting Of Locking Arrangment 45 Repairs To Submeribsle Pump With Discharge ( From And Above 1000Gph But Less Than 3000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 46 Replacement Of Impeller I. Bronze 47 Ii. Cast Steel / Stainless Steel. 48 Iii. Noryl 49 Replacement Of Diffuser I. Bronze 50 Ii. Cast Steel / Stainless Steel. 51 Iii. Noryl 52 Replacement Of Pump Bowl 53 Fabrication, Providing And Fitting Of Pump Shaft 54 Replacement Of Cast Iron Non Return Valve Shaft 55 Replacement Of Stain Less Steel Strainers 56 Replacement Of Cast Iron Threaded Discharge Outlet 57 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 58 Ii. Cast Steel / Stainless Steel. 59 Iii. Nitryl Rubber 60 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 61 B. 65 Mm Dia 62 C. 80 Mm Dia 63 D. 100 Mm Dia 64 Fabrication, Providing And Fitting Of Locking Arrangment 65 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 7000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 66 Replacement Of Impeller I. Bronze 67 Ii. Cast Steel / Stainless Steel. 68 Iii. Noryl 69 Replacement Of Diffuser I. Bronze 70 Ii. Cast Steel / Stainless Steel. 71 Iii. Noryl 72 Replacement Of Pump Bowl 73 Fabrication, Providing And Fitting Of Pump Shaft 74 Replacement Of Cast Iron Non Return Valve Shaft 75 Replacement Of Stain Less Steel Strainers 76 Replacement Of Cast Iron Threaded Discharge Outlet 77 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 78 Ii. Cast Steel / Stainless Steel. 79 Iii. Nitryl Rubber 80 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 81 B. 65 Mm Dia 82 C. 80 Mm Dia 83 D. 100 Mm Dia 84 Fabrication, Providing And Fitting Of Locking Arrangment 85 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 7000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 86 Replacement Of Impeller I. Bronze 87 Ii. Cast Steel / Stainless Steel. 88 Iii. Noryl 89 Replacement Of Diffuser I. Bronze 90 Ii. Cast Steel / Stainless Steel. 91 Iii. Noryl 92 Replacement Of Pump Bowl 93 Fabrication, Providing And Fitting Of Pump Shaft 94 Replacement Of Cast Iron Non Return Valve Shaft 95 Replacement Of Stain Less Steel Strainers 96 Replacement Of Cast Iron Threaded Discharge Outlet 97 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 98 Ii. Cast Steel / Stainless Steel. 99 Iii. Nitryl Rubber 100 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 101 B. 65 Mm Dia 102 C. 80 Mm Dia 103 D. 100 Mm Dia 104 Fabrication, Providing And Fitting Of Locking Arrangment 105 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 106 Replacement Of Impeller I. Bronze 107 Ii. Cast Steel / Stainless Steel. 108 Iii. Noryl 109 Replacement Of Diffuser I. Bronze 110 Ii. Cast Steel / Stainless Steel. 111 Iii. Noryl 112 Replacement Of Pump Bowl 113 Fabrication, Providing And Fitting Of Pump Shaft 114 Replacement Of Cast Iron Non Return Valve Shaft 115 Replacement Of Stain Less Steel Strainers 116 Replacement Of Cast Iron Threaded Discharge Outlet 117 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 118 Ii. Cast Steel / Stainless Steel. 119 Iii. Nitryl Rubber 120 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 121 B. 65 Mm Dia 122 C. 80 Mm Dia 123 D. 100 Mm Dia 124 Fabrication, Providing And Fitting Of Locking Arrangment 125 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 126 Replacement Of Impeller I. Bronze 127 Ii. Cast Steel / Stainless Steel. 128 Iii. Noryl 129 Replacement Of Diffuser I. Bronze 130 Ii. Cast Steel / Stainless Steel. 131 Iii. Noryl 132 Replacement Of Pump Bowl 133 Fabrication, Providing And Fitting Of Pump Shaft 134 Replacement Of Cast Iron Non Return Valve Shaft 135 Replacement Of Stain Less Steel Strainers 136 Replacement Of Cast Iron Threaded Discharge Outlet 137 Replacement Of Bowl Stage Bushes For Fitment Of Impellers I. Bronze 138 Ii. Cast Steel / Stainless Steel. 139 Iii. Nitryl Rubber 140 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head / Table 5 ) A. 50 Mm Dia 141 B. 65 Mm Dia 142 C. 80 Mm Dia 143 D. 100 Mm Dia 144 Fabrication, Providing And Fitting Of Locking Arrangment 145 Repairs To The Rising Main For Plugging The Openings / Cracks Etc. By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Works. 146 Cost On Account Of Making Proper Groove To The Leak Spot By Using Grinder At Site. 147 Cost On Account Of Providing Of Ms Plate As Required At Site 148 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 149 Repairs To The Non-Rising Spindle Sluice Valve Of Size 80Mm And 100 Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 150 Dismantling The Sluive Valve For Checking Inner Parts 151 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 152 Fabrication, Providing And Fitting Of Check Nut As Per Sample 153 Fabrication, Providing And Fitting Of Flap 154 Cost On Account Of C.I. Welding 155 Repairs To The Reflex Valve ( Nrv ) Of Size 80Mm And 100Mmdiameter By Way Of Using Dg Set And Welding At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 156 Dismantling The Reflexvalve For Checking Inner Parts 157 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 158 Making Of Flap Seat To Make It Proper Effective 159 Providing And Fitting Of Jain As Per Sample 160 Providing And Fitting Of Nuts And Bolts As Required 161 Making Of Hings For Perfect Movement Of The Flap 162 Making And Fitting Of Hinge Spindle As Per Sample 163 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 164 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 165 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 166 Providing And Fitting Of Rubber Washers 5Mm Thick Compatible For 167 65Mm Dia Pipe Flange 168 80Mm Dia Pipe Flange 169 100Mm Dia Pipe Flange 170 125Mm Dia Pipe Flange 171 200Mm Dia Pipe Flange 172 Providing And Fitting Of Table-5 / Table-17M S Flange ( As Per Requirement ) Compatible For 173 65Mm Dia Pipe 174 80Mm Dia Pipe 175 100Mm Dia Pipe 176 125Mm Dia Pipe 177 Providing And Fitting Of G. I. Bends Compatible For 178 65Mm 179 80Mm 180 100Mm 181 125Mm 182 200Mm 183 Providing And Fitting Of Ball / Thrust Bearing ( De & Nde ) For Different Capacity Motors And Pumps Compatible For 184 No. 6308 185 No. 6309 186 No. 6312 187 No. 6306 188 No. 6208 189 No. 6211 190 No. 6311 191 No. 6310 192 No. 6212 193 No. 6305 194 No. 7312 195 No. 6307 196 Providing And Fitting Of Bearing Housings With Gaskets For Different Capacity Motors And Pumps Compatible For 197 No. 6306 198 No. 6308 199 No. 6309 200 No. 6312 201 No. 6208 202 No. 7309 203 No. 6311 204 No. 6310 205 No. 6212 206 No. 6305 207 No. 7312 208 No. 6307 209 Welding In Single Beat At Various Ms Structural Joints Viz, Gantry Joint, Column Joint, Gate Joint, Sheet Joint, Fencing Joint Etc. 210 Replacement Of Gravity To Various Batteries With Charging 211 M-Oil Change Including Providing / Fitting Of M-Oil , Replacement Of Filters Up To 25Kva Dg Set 212 M-Oil Change Including Providing / Fitting Of M-Oil , Replacement Of Filters From 30Kvato 40 Kva Dg Set 213 M-Oil Change Including Providing / Fitting Of M-Oil , Replacement Of Filters 45Kva To 62.5Kva Dg Set 214 Providing And Fitting Of Ball Valves Of Following Capacities 215 12Mm 216 15Mm 217 25Mm 218 Repairs Of Chain Pulley Block And Successful Testing Of Following Capacities 219 01 Ton 220 02 Ton 221 03 Ton 222 05 Ton 223 Replacements Of Chain Pulley Block And Successful Testing Of Following Capacities 224 01 Ton 225 02 Ton 226 03 Ton 227 Providing And Fitting Of Asbestos Gland Packing Of Superior Quality 228 8.5 Mm 229 10 Mm 230 12 Mm 231 16 Mm 232 Providing And Fitting Of Tyre / Rubber Couplings Of Superior Quality 233 Tc-011 234 Tc-012 235 Tc-013 236 Tc-014 237 Tc-016 238 Tc-017 239 Providing And Fitting Of Suction Meshed Strainer For Bowl Dia 240 100Mm 241 125Mm 242 150Mm 243 200Mm 244 250Mm 245 300Mm 246 Providing And Fitting Of Star Couplings Of Superior Quality 247 Assorted Size 248 Repairs To Ms / Gi Rising Main At Damaged Joints By Way Of Excavaton Of Trunches, Cutting Of Both Damaged Flanges, Providing And Fitting Of Socket In Two Halves One From Above And Other On Top By Welding In Two Beats Using Welding, Cutting, Dg Set Along The Contour Of The Rising Main For Making The Leak Proof Solid Joint 249 65Mm 250 80Mm 251 100Mm 252 125Mm 253 200Mm 254 Repairs To Open Well Submersible Pumping Unit With Discharge From 3000Gph To 10000 Gph, Head From And Above 10M But Less Than 52M With Motor Rating As 1Hp To 7.5Hp 255 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 256 Complete Rewinding Of The Stator Assembly By Appropriate Gauged Copper Wire 257 Cost On Account Of Labour, Insulted Paper, Sleeves Etc., Used During Rewinding With Testing 258 Cost On Account Of Associated Consumeable Items Like Crimped Paper, Sleeves, Pvc Pipes, Bamboo Sticks, Thread Etc. 259 Deduction Of Scrap From Damaged Wire 260 Replacement Of Stain Less Steel Shaft 261 Replacement Of Cast Iron Impeller 262 Replacement Of Cast Iron Volute Casing 263 Providing And Fitting Of Rubber Oil Seal 264 Providing And Fitting Of Bronze Bushes 265 Providing And Fitting Of Stainless Steel Thrust Pad 266 Providing And Fitting Of Threaded Plastic Strainer 267 Repairs To Open Well Submersible Pumping Unit With Discharge From And Above 10000Gph To 20000 Gph, Head From And Above 10M But Less Than 52M With Motor Rating From And Above 7.5Hp To 15Hp 268 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 269 Complete Rewinding Of The Stator Assembly By Appropriate Gauged Copper Wire 270 Cost On Account Of Labour, Insulted Paper, Sleeves Etc., Used During Rewinding With Testing 271 Cost On Account Of Associated Consumeable Items Like Crimped Paper, Sleeves, Pvc Pipes, Bamboo Sticks, Thread Etc. 272 Deduction Of Scrap From Damaged Wire 273 Replacement Of Stain Less Steel Shaft 274 Replacement Of Cast Iron Impeller 275 Replacement Of Cast Iron Volute Casing 276 Providing And Fitting Of Rubber Oil Seal 277 Providing And Fitting Of Bronze Bushes 278 Providing And Fitting Of Stainless Steel Thrust Pad 279 Providing And Fitting Of Threaded Plastic Strainer 280 Providing And Fitting Of Ms Couplings For Submersible Pumping Units 281 Providing And Applying Of Grease 282 Providing And Shrouding Of Pea Gravel 5Mm 283 Providing And Shrouding Of Pea Gravel 6Mm 284 Repairs To Spring Attachment Cum Rod Of The Rolling Shutter Of Cgi Sheeted Angle Iron Shed / Pump House Including Replacement Of Bearing 285 Replacement Of Damaged Control Valves From The Suction / Delivery Line And Providing / Fitting Of Di Sluice Valves Flanged With Pn Rating 16 As Per Following Dia’S Including Transportation, And Suitable Size Nuts And Bolts And Testing On Load At Site. 286 65Mm 287 80Mm 288 100Mm 289 125Mm 290 Replacement Of Damaged Control Valves From The Suction / Delivery Line And Providing / Fitting Of Di Non Return Valves Flanged With Pn Rating 16 As Per Following Dia’S Including Transportation, And Suitable Size Nuts And Bolts And Testing On Load At Site . 291 65Mm 292 80Mm 293 100Mm 294 125Mm 295 Providing / Fitting Of Ms Holding Clamps Two Feet Long Fabricated Out Of 12Mm Thick Ms Plate 2 ½” Width With Flanges Drilled With 6 / 8” Dia Holes 296 Providing / Fitting Of Column Pipe 3Mtr Length G I Class-B, Both Sides Flanged With Table-5 Flanges As Per Size 297 65Mm 298 80Mm 299 100Mm 300 Replacement Of Damaged Pipe And Providing / Fitting Of Gi Class –B Pipe As Per Size Below 301 65Mm 302 80Mm 303 100Mm 304 125Mm 305 Note: The Scrap Value Mentioned Above Shall Be Deducted From The Total Valve Of Boq To Arrive At Value Without Scrap. The Value Thus Attained Shall Be Again Deducted By Total Scrap Value To Get The Effective Amount On Boq For Ascertainingoverall L1.Unless Specified, The Old Material Shall Be Returned To Divisional / Sub Divisional Store
