Supply , Installation , Erection And Commissioning Of Electromechanical Equipments At Hosanagara-1 Receiving Conveyor ( Feeder ) ; Providing Supply And Erection Of Feeder Conveyor Of Capacity 2 T / H , Size Length 8 Mtr And Width Of The Belt 900 Mm M-Karnataka

Supply , Installation , Erection And Commissioning Of Electromechanical Equipments At Hosanagara-1 Receiving Conveyor ( Feeder ) ; Providing Supply And Erection Of Feeder Conveyor Of Capacity 2 T / H , Size Length 8 Mtr And Width Of The Belt 900 Mm Made Up Of Nylon Of Thickness 8Mm Belt Material 315 , 3 Ply Nylon, U Shape Design Belt With Suitable Rollersmaterial Handle Waste Consisting Of Wood, Plastic, Tire Crumps, Oily Rags, Solidsetc With Metal Pieces Occasionally.With Supporting Channels Of Mc100mm With Suitable Impact Rollers Of 500 Mm Spacing And Idler Spacing 2000Mm, Support For Conveyor1.5 Mtr Heightalong With 3 Hp Geared Motor ( Crompton Or Equivalent ) Drive Transmission Chain And Sprocket For Solid Waste Work. Rate Should Quote Including Gst, Electrical Cable All Lead And Lifts And Erect The Whole As Per The Direction Of The Site Engineer In Charge 2 35 / 4 Mm Duel Trommel . Capacity 2 T / H , Duel Deck Screening Mechanism M S Rotary Screen Seggrigetion Size Below 36 Mm And Below 4Mm With A Speed Of 20-25 Rpm Screw Type Discharge, . Roller Drive Mechanism , No Of Rollers 6 Nos With Helical Geared Motor Drive Transfer Through Chain And Sprocket, Capacity Of The Motor Is 7.5 Hp 3Phase, Inner 35 Mm Perforated 8Mm Hick Sheet With A Length 6.1 Mtr And Dia Of 1.8Mtr And 4Mm Perforated Sheet Of Thickness 4Mm Ms Sheet Of 6 Mtr Length And A Dia Of 1.6Mtr And Installed At 5 Degree Inclination With Frame Support Structure Is Mc125 Channels With Suitable Cross Support System. Discharge Area 2Mtr , Side Cover With 2Mm Ms Sheet With Suitable Supporting Angles Should Be Provide, With All Lead And Lift , Including Installation Charges As Per The Direction Of The Engineer In Charge. 3 Reject Conveyor Reject Conveyor ( Feeder ) ; Providing Supply And Erection Of Feeder Conveyor Of Capacity 2 T / H , Size Length 7Mtr And Width Of The Belt 900 Mm Made Up Of Nylon Of Thickness 8Mm Belt Material 315 , 3 Ply Nylon, U Shape Design Belt With Suitable Rollersmaterial Handle Waste Consisting Of Wood, Plastic, Tire Crumps, Oily Rags, Solids Etc With Metal Pieces Occasionally. With Supporting Channels Of Mc100mm With Suitable Impact Rollers Of 500 Mm Spacing And Idler Spacing 2000Mm, Support For Conveyor1.5 Mtr Height Along With 3 Hp Geared Motor ( Crompton Or Equivalent ) Drive Transmission Chain And Sprocket For Solid Waste Work. Rate Should Quote Including Gst, Electrical Cable All Lead And Lifts And Erect The Whole As Per The Direction Of The Site Engineer In Charge 4 Operation And Maintenance Of Above Equipments For Generated / Collected Waste Per Tonne On Daily Basis

INR 760 /-

Refer document

INR 30 Lakhs /-