Wbmad / Ulb / Hm / Nit-1E / 2021-22 Supplying Conference Table And Chair Along With Fitting, Fixing For Decoration Of Conference Room Of Haringhata Municipality. , Regency 7001D High Back :- Seat / Back Assembly:-The Seat / Back Shall Be Made Up Of 1.2, Haringhata Municipality-West Bengal

Wbmad / Ulb / Hm / Nit-1E / 2021-22 Supplying Conference Table And Chair Along With Fitting, Fixing For Decoration Of Conference Room Of Haringhata Municipality. , Regency 7001D High Back :- Seat / Back Assembly:-The Seat / Back Shall Be Made Up Of 1.2 ±0.1Cm Thick Hot Pressed Plywoodmethod Desaribed Inand Upholstered With Fabric Andmoulded Polyurethane Foam Together With Moulded Seat And Back Covers. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Back Shall Be-50.0 Cm ( W ) X 72.0 Cm ( H ) And Of Seat Shall Be-50.0 Cm ( W ) X 46.5Cm. ( D ) . Hi Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density 45±2Kg / M3-And Hardnessload 16 ±2 Kgf For 25% Compression.Seat / Back Covers:The Seat Cover Shall Beinjection Moulded In Black Co-Polymer Polypropylene And Back Cover Should Bevacuum Formed From Abs Sheetsarmrests: The One-Piece Armrests Shall Be Made Of Black Integral Skin Polyurethane With 50-70 Shore A Hardness And Reinforced With M.S. Insert. The Armrests Shall Be Scratch And Weather Resistant Tant.The Armrests Shall Be Fitted To The Seat With Seat / Armrest Connecting Strip Assembly Made Of0.5 ±0.05-Cm. Thick Hr Steel. Center Tilt Mechanism:Thecenter Tilt Mechanism Shall Be Designed As-360° Revolving Type, 17° ±2°Maximum Tilt On Pivot At Center, Upright Position Locking, Tilt Tension Adjustment. Pneumatic Height Adjustment:The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 12.0 ±0.3Cmtelescopic Bellow Assembly: The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 66.3 ±0.5Cm. ( 76.3±1.0 Cm With Castors ) .Twin Wheel Castors;The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair-Seat Height - Min 44.2 To Max 54.2Cm.Height - Min103.3 To Max 115.3Cm.Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Regency 7002D Mid Back :- Seat / Back Assembly:-The Seat / Back Shall Be Made Up Of 1.2 ±0.1Cm Thick Hot Pressed Plywoodmethod Desaribed Inand Upholstered With Fabric Andmoulded Polyurethane Foam Together With Moulded Seat And Back Covers. The Back Foam Is Designed With Contoured Lumbar Support For Extrasupportback Size: 50.0Cm X 49.0 Cm ( H ) Seat Size:-50.0 Cm ( W ) X 46.5Cm. ( D ) .Hi Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density 45±2Kg / M3-And Hardnessload 16 ±2 Kgf For 25% Compression.Seat / Back Covers:The Seat Cover Shall Beinjection Moulded In Black Co-Polymer Polypropylene And Back Cover Should Bevacuum Formed From Abs Sheetsarmrests: The One-Piece Armrests Shall Be Made Of Black Integral Skin Polyurethane With 50-70 Shore A Hardness And Reinforced With M.S. Insert. The Armrests Shall Be Scratch And Weather Resistant.The Armrests Shall Be Fitted To The Seat With Seat / Armrest Connecting Strip Assembly Made Of0.5 ±0.05-Cm. Thick Hr Steel.Center Tilt Mechanism:Thecenter Tilt Mechanism Shall Be Designed As-360° Revolving Type, 17° ±2°Maximum Tilt On Pivot At Center, Upright Position Locking, Tilt Tension Adjustment.Pneumatic Height Adjustment:The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 12.0 ±0.3Cm.Telescopic Bellow Assembly: The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 66.3 ±0.5Cm. ( 76.3±1.0 Cm With Castors ) .Twin Wheel Castors;The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 44.2 To Max 54.2Cm.Height - Min78.5 To Max 90.5Cm.Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Chairs With Desklet 7004Xd :- Seat / Back: The Seat Sub-Assembly Should Bemade Up Of 1.2±0.1Cm Thk Plywood Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Seat Can Tip-Up When Not In Use And Thshould Befeature Can Be Used While Stacking The Chairs Horizontally The Back Sub-Assembly Should Bemade Up Of Injection-Moulded Polypropylene Inner Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Contoured Back With Width Extension At The Bottom Should Be A Should Bedesigned To Give Comfort To Lower Back. The Back Flexing Features Allows The Back To Tilt By 9C±2 To Aid The User In Adopting A Comfortable Reclining Posture. Both These Sub-Assemblies Should Befixed To The Tubular Structure, Back Size: 45.2Cm ( W ) X 44.6Cm ( I-I ) Seat Size: 47.0Cm ( W ) X 50.0Cm ( D ) Tubular Frame Structure: The Powder-Coated 4 Leg Structure Should Bemade Of 2.2 ±0.03Cm Dia X 0.25 ±0.02Cm Thk M.S. E.R.W. Tube Front And Rear Leg Welded Along With Connecting Tube Made Of 1.9 ±-0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube To Form The Tubular Frame Assembly. The Legs Should Beprovided With Injection-Moulded Adopter Bush In Black Nylon And Brake-Loaded Castors Enabling Easy Maneuvering While Not In Use And Stable Sitting While In Use_ The Chairs Can Be Stacked Horizontally When Not In Use_Polyurethane Foam: The Polyurethane Foam Should Bemoulded With Density = 70.0 ±8.0 Kg / M3 And Hardness = 20 ±2 For Seat & 16 ±2 For Back At 25% Compression.Armrests: The Armrest Structure Should Bemade Up Of 2.2 ±0.03Crn Dia X 0.25 ±0.02Cm Thk M.S. E R.W. Tube Welded To The Tubular Frame Structure And Having A Scratch-Resistant Tant Abs Arm Top. Full Desklet: The Full Desklet Assembly Should Beflip-Up Type And Should Bemade Up Of Extension Tube Of 1.9 ±0.02Em Dia X 0_2 ±0.016Cm Thk Pas. E.R.W. Tube And A Support Tube On L.H. Side Of 1.6 ±0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube On Which An Scratch Resistant Tant Abs Desklet Top Should Befixed Brake-Loaded Castors : The Brake-Loaded Castors Should Beassembled To The Chair Legs, To Give A Free Movement For Maneuvering The Chair When Not In Use And It Will Brake The Movement When Load Should Beapplied ( While In Use ) To Give A Stable Feel. The Twin Wheel Castors Should Beinjection Molded In Black Polypropylene.Overall Dimensions Of Chair Seat Height - 47.5 Cm.Height - 89.0Cm.Width & Depth Of Chair As Measured From Base - Width-71.0Cm And Depth-82.0 Cm. , Mingle Conference Table ( U Shaped ) – Membrame : 1 Head Module- 2350W -2350 X 850 X 740, 10 ( 2 Str ) Shared Module – 1350 X 710 X 740, 2 Main Module – 1350 X 710 X 740, 1 ( 2 Str ) End Lh - 1350 X 710 X 740, 1 ( 2 Str ) End Rh - 1350 X 710 X 740. Work Surface-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shadeconforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Plastic Abs Access Flap Is Provided For Easy Access To Wires And Cables. Work Top Is Available In Various Shapes As Shown Above. Understructure-It Consist Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Aluminium Alloy 63400 - Wp Profile Is Used For Connecting Panels Together. The Product Has A Knock-Down Construction.Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Powder Coated Accent Metal Strip Provided Below Work Surface To Enhance Aesthetics. It Is Made Of 0.8Mm Crca As Per Is 513, Epoxy Polyester Powder Coated ( Dft 40-60 Microns. Wire Management-An Array Of Panels Made Of 0.8Mm Crca Ms Is:513, Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) Is Used For Flow Of Wires And Cables. Provision To Mount Anchor Roma 6 Module Plate Is Provided Below Worktop. Cutout On Top With Two Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop.

Refer document

INR 26023.0 /-

INR 13.01 Lakhs /-