E-Quotation For Deciding Costing Of Items For Existing Rukka Wtp ( Old ) Capacity 37.5Mgd For Replacement / Installation & Construction Of Following Annexed Items-1 Clarifier Bridge & Flux Mixer :- ( A ) Clarifier Bridge:- Providing, Supplying, Fabrication, Instalation, Commissioning & Testing Of Clarifier Bridge For Existing Circular Carifloculator, Capacity:- 6Mgd, Madeup Of Mild Steel Plate ( Thickness 6Mm To 12Mm ) And Angles ( Size & Thickness As Per Required ) , Dia:- 53Meter, Depth:- 4.5M, Including Motor, Gear Box, Switch Board, Belt, Rail, Wheel, Pannel Board, Rubber Scraper, Colour With Zinc Paint And All Allied Works All Completed As Per Cpheeo Mannual & Is Specification & Standard With 5Years Repair And Maintenance In All Equipments ( B ) Flux Mixer:- Providing, Supplying, Fabrication, Instalation, Commissioning & Testing Of Flux Mixer For 6Mgd Capacity Of Existing Clarifloculator, Containg Wood Plank 4No. Length 2M, 4 Nos. Thickness 2Inch , Motor 5 Hp, Gear Box 3Hp, Switch Board Three Phase 65Amp, Main Switch And Iron Rod Length 3.2M And Dia 2Inch As Per Cpheeo Mannual & Is Specification & Standard With 5Years Repair And Maintenance In All Mechanical Equipment. 2 Filter Beds With All Hydraulic Equipment & Allied Works:- Providing, Supplying, Fabrication, Installation, Commissioning & Testing Of V-Screen Filter Bed ( Latest Technology ) , Capacity :- 2Mgd Each Bed Of Existing Wtp, Size 4.5Mx2.6M Each Unit , Each Bed Contain Two Units, Dia Of Lateral Pipes 1.25Cm, Length Of Each Lateral Pipe 1230Mm, Fixing With 6Inch Rcc Slab, Filling With Gravel ( Size 5Mm To 60Mm ) Upto 40Cm Above Lateral, Filling With Sand Of Uniformity Coefficient Betweem 1.2 To 1.7 Or 1.5 , Including Supplying And Fixing Of Back Wash Ms Pipe Of 6Inch Dia Of Length 30 M , Minor Repairing Of Trough And Channel Of Existing Bed And All Allied Works Of Filter As Per Cpheeo Mannual & Is Specification & Standard With 3Months Trial And Run. Mechanical Work:- Installation And Supplying Of Following Hydraulic System In Filter Bed With 5Years Repair And Mentainance In All Mechanical Equipment All Complete As Per Cpheeo Mannual & Is Specification & Standard. ( I ) Float Valve Size 18Inch And 24 Inch , Made Up Of Copper Sheet ( Thickness 2Mm ) , Rod For Fitting Float Valve 3 Nos. Made Up Copper ( Length 1.5M, 2M & 3.5M, Dia Of Each 1Inch ) Fitted With 4 Nos. Of Beering ) ( Ii ) Fourway Valve Size 1.25 Inch And Its Handle 5Nos. ( Iii ) Replacing Of Bucket 6Nos. Size 6Inch Dia, Made Of High Strength Rubber. ( Iv ) Replacing Of Inlet Valve & Outlet Valve Made Of Pig Iron Thickness 30Cm, Size 1Mx.75M, Fitted In Channel Of Size 300Mmx300mx500mm, Length Of Channel 3.5M , Fitted With Gutka ( Check Nut ) And Spindle Made Of Copper 1 Inch Dia Length 3M And All Complete Works. ( V ) Replacing Of Waste Water Valve 24Inch Size Penstock Type Made Up Of Pig Iron Thickness 2Inch, Including Checknut And Copper Spindle Length 2.5 M ( Vi ) Copper Pressure Pipe Of 1 / 2 Inch Size And All Allied Work Complete As Per Cpheeo Mannual & Is Specification & Standard With 5Years Repair And Maintainance Of All Equipment. 3 Areator / Casecade For 6Mgd Capacity Of Existing Clarifloculator :- Construction Of New Casecade Aerator Of Rcc , Capacity 6Mgd With Providing, Supplying Installation, Fabrication, Commissioning & Testing, Containing Central Ms Pipe Of 600Mm Dia ( Thickness Not Less Than 12Mm ) , Make Connection With Existing Pipe Including Cutting And Jointing Of 600Mm Dia Ms Pipe Of Length 8M ( Approx ) , Provision And Fitting Of 2 Nos.Sluice Valve 700Mm Dia, Make An Rcc Channel To Join Existing Channel To Aearator Approx 4M Long, Height Of Central Shaft From Ground Level Is 5.5M, Minimum Number Of Casecade Steps Should Be 3 ( Three ) , And All Works Complete As Per Cpheeo Mannual & Is Standard & Specification With 3 Months Trial And Run.
