| 1 | 1 | Taking down LT cable of any size all as specified and directed by Engr-in-Charge. | | 832 | RM |
|---|
| 2 | 2 | Taking down LT Panel /Busbar/ feeder pillar box of any type all as specified and directed by Engr-in-Charge. | | 12 | Each |
|---|
| 3 | 3 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 300 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. | | 150 | RM |
|---|
| 4 | 4 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 185 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. | | 200 | RM |
|---|
| 5 | 5 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 120 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. | | 100 | RM |
|---|
| 6 | 6 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 95 Sqmm 3.5 core. complete all as specified and directed by Engr-in-Charge. | | 90 | RM |
|---|
| 7 | 7 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. | | 180 | RM |
|---|
| 8 | 8 | Supply and Laying XLPE LT cable PVC insulated armoured and PVC sheathed heavy duty electrical cable LT 1100 Volts grade with Aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. | | 112 | RM |
|---|
| 9 | 9 | Supply installation testing and commissioning LT control panel outdoor type factory made cubical totally enclosed type with front and rear door opening as per engineering practice provided with locking arrangement for opening. Size of panel having dimension not less than 150cm x 100cm x 50cm provided with footing 30 cm clear space between bottom of panel and flooring embedded in 40 mm thick PCC 1:2:4 type B -1 ( using 20 mm graded aggregate), panel made out of 2.0 mm mild steel sheet and painted with powder coated paint over a coat of red oxide primer on angle iron of size 40x40x6mm with accessories prewired with insulated copper wire of suitable size complete all as specified and directed by Engr-in-Charge. The panel shall compromise of the following fittings and fixture :- \n Make : Jaima Electrical/L&T\n(a) Aluminium busbar 250 amps for phases and neutral with colour code -04 Nos\n(b) MCCB 200 amps 36 KA 415 volts - 01 No (Incoming)\n(c) MCCB 63 amps 16 KA 415 volts - 02 No (out going)\n(d) MCB 32 amps 240 volts - 02 No (out going)\n(e) Digital volmeter 0-500V\n(f) Digital Ampere meter 0-400 A with suitable rating CTs\n(g) LED Neon indication lamp - 01 set | | 1 | Each |
|---|
| 10 | 10 | Supply, fabrication and fixing of feeder piller box made out of MS sheet of 1.6 mm thickness bent to shape & size factory made with welding,bending works suitable for and including 200 Amps rated aluminium bus bar(lenth of bus bar not less than 60 cm )4 Nos of making holes of any size with suitable size of nuts, bolts and washers complete with mounting legs of size 40 x 40x 5 mm and lenght of angle iron not less than 1 mtr to be embeded in PCC below GL ground and 1.5 mtr above ground level including painting of complete structure with two coats of super enamled synthetic paint over a coat of red oxide and incoming/outgoing cable connections with required size of cable lugs with proper crimping(for connection of existig cable) complete all as specified and directed by Engr-in-Charge.\n Make : Jaima Electricals/L&T | | 6 | Each |
|---|
| 11 | 11 | S&F fabrication of panel board double door outdoor type of size 1.0mtr x 0.50mtr x 0.90mtr and 3.15mm MS sheet duly powder coated complete with angle iron 50mmx50 mm frame CPRI approved including 200 Amp copper basbar, 160 Amp 4 Pole MCCB, connecting with bas bar,complete all as specified and directed by Engr-in-Charge.\n Make : Jaima Electricals/L&T | | 5 | Each |
|---|
| 12 | 12 | Replacement of on-load change over switch 630 Amp complete all as specified and directed by Engr-in-Charge.\nMake: Havells/Legrand/ABB/Schneider | | 2 | Each |
|---|
| 13 | 13 | Replacement of on load change over switch 125 Amp complete all as specified and directed by Engr-in-Charge.\nMake: Havells/Legrand/ABB/Schneider | | 1 | Each |
|---|
| 14 | 14 | Removing of trench cover and cleaning of cable trench and removing all debries and neccesary PCC cover located at old power house complete all as specified and directed by Engr-in-Charge. | | 2 | Each job |
|---|
| 15 | 15 | M&L in Replacement of rubber Mat of size 1m x 2mx 19mm thick complete all as specified and directed by Engr-in-Charge. | | 6 | Each |
|---|
| 16 | 16 | Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground cable n.exc 10 Sqm on plan and n.exc 1.5m in depth in in hard / dense soil and getting out complete all as specified and directed by Engr-in-Charge. | | 162 | Cum |
|---|
| 17 | 17 | Returning, filling in, including spreading leveling watering and well ramming in layers not exc 25 cm thick all as specifiedand directed by Engr-in-Charge. | | 74.8 | Cum |
|---|
| 18 | 18 | Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge. | | 87.2 | Cum |
|---|
| 19 | 19 | Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified.\nNote:-\n(i) Excavation and earth work to be measured and paid for separately\n(ii) Thickness of 18 cms after punning shall be considered for payment | | 62.1 | Cum |
|---|
| 20 | 20 | Labour only for fixing old cable cover any type or size all as specifiied and directed by Engr-in-Charge. | | 450 | Each |
|---|
| 21 | 21 | M&L for PCC cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed.\nNote:-Excavation and earth work to be measured and paid for separately | | 4000 | Each |
|---|
