| 1 | 1 | Dismantling: - Dismantling wash basin with brackets with or without waste fittings & disposal of material as per direction of Engineer in-charge. | 1400027568_1 | 1 | Each |
|---|
| 2 | 2 | Dismantling: - Dismantling urinal with all fittings & disposal of material as per direction of Engineer in-charge. | 1400027568_2 | 1 | Each |
|---|
| 3 | 3 | Dismantling: - Dismantling of G.I. pipes of size 15mm with all fittings & disposal of material as per direction of Engineer in charge. | 1400027568_3 | 10 | Metre |
|---|
| 4 | 4 | Dismantling: - Dismantling of G.I. pipes of size 25mm with all fittings & disposal of material as per direction of Engineer in charge. | 1400027568_4 | 10 | Metre |
|---|
| 5 | 5 | Dismantling: - Dismantling carefully wood work in posts, post plates, rafters, partition etc., sorting and stacking serviceable materials at site and removing rubbish as directed. | 1400027568_5 | 1 | Cum |
|---|
| 6 | 6 | Dismantling: - Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish up to 50m lead as directed by site-in charge. | 1400027568_6 | 2 | Cum |
|---|
| 7 | 7 | Cutting of trees: Cutting of trees including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per Technical Specifications. Lead up to 100m v) Girth above 2700 mm to 4500 mm | 1400027568_7 | 2 | Each |
|---|
| 8 | 8 | Brick work: Brick work with 125 mm. thick from1st class bricks in cement mortar (1:4) in ground floor. | 1400027568_8 | 5 | SQM |
|---|
| 9 | 9 | PCC Work: Providing Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes) Pakur Variety | 1400027568_9 | 2 | CUM |
|---|
| 10 | 10 | CPVC Work: Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007. With all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. (b) For Concealed Work 15 mm | 1400027568_10 | 5 | Mtr |
|---|
| 11 | 11 | CPVC Pipes:- Description as mentioned for Sl No. 10 of size 20 mm | 1400027568_11 | 10 | Mtr |
|---|
| 12 | 12 | CPVC Pipes:- Description as mentioned for Sl No. 10 of size 25 mm | 1400027568_12 | 10 | Mtr |
|---|
| 13 | 13 | U.P.V.C. pipes :Supplying ,fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches up to 1.5 metre and refilling the same complete as per direction of the Engineer in- charge. (Payment will be made on centre line measurement of the total pipeline including specials. (B) Underground (i) 75 mm dia. | 1400027568_13 | 10 | Meter |
|---|
| 14 | 14 | Urinal : Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. Size:- (i) 635 mm X 395 mm X 420 mm | 1400027568_14 | 1 | Each |
|---|
| 15 | 15 | Soap tray: Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm | 1400027568_15 | 1 | Each |
|---|
| 16 | 16 | Wash basin : Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including Mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size | 1400027568_16 | 1 | Each |
|---|
| 17 | 17 | Pedestal : Supplying, fitting and fixing pedestal of approved make for wash basin(white) | 1400027568_17 | 1 | Each |
|---|
| 18 | 18 | Mirror : Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm | 1400027568_18 | 1 | Each |
|---|
| 19 | 19 | Towel rail: Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (i) 25 mm dia. and 450 mm long | 1400027568_19 | 1 | Each |
|---|
| 20 | 20 | Bib cock: Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm | 1400027568_20 | 6 | Each |
|---|
| 21 | 21 | Ceramic tiles: Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A)Floor -With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. | 1400027568_21 | 90 | Sq.m |
|---|
| 22 | 22 | Ceramic tiles : As per description of floor tiles:\n(B) Wall Tiles -With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m\n(a) Area of each tile up to 0.09 Sq.m\n(i) Coloured decorative | 1400027568_22 | 20 | Sq.m |
|---|
| 23 | 23 | Cleaning of roof : Taking out old damaged tar felt from the roof, parapet etc. preparing the roof surfaces by removing all spoils, blisters, moss etc. from the working site and disposal of the same beyond the compound and cleaning the site in all respect as per direction of Engineer-in-Charge All floor | 1400027568_23 | 72 | Sq.m |
|---|
| 24 | 24 | Wood work in frame: Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). (b) Ordinary teak. | 1400027568_24 | 0.13 | Cum |
|---|
| 25 | 25 | Door Panel: Flush type doors- Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well-seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position & also including the cost of hinges, AL drop, tower bolt, sliding bolt and other fittings in ground floor.\n(a) 35 mm thick shutters (single leaf) | 1400027568_25 | 2.5 | Sq.m |
|---|
| 26 | 26 | Hinges: Hinges -Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. | 1400027568_26 | 6 | Each |
|---|
| 27 | 27 | Door closer: Hydraulic door closer- of approved quality as per I.S.I. standard fitted and fixed complete. (a) Heavy type (I.S.I. size 3) | 1400027568_27 | 1 | Each |
|---|
| 28 | 28 | Dismantling and fixing:-Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & re-fixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately) (a) Up to area 2.5 Sq.m | 1400027568_28 | 5 | Sq.m |
|---|
| 29 | 29 | Chipping work: Labour for Chipping of concrete surface before taking up Plastering work. | 1400027568_29 | 120 | Sq.m |
|---|
| 30 | 30 | Plaster work -Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (b) 15 mm thick plaster | 1400027568_30 | 15 | Sq.m |
|---|
| 31 | 31 | Cleaning of wall: Cleaning of walls and ceiling by scraping, sand papering and smoothening down the surface including putting. | 1400027568_31 | 110 | Sq.m |
|---|
| 32 | 32 | Waterproofing treatment -Providing waterproofing treatment over concrete roof surface (old or new) by the application of two coats of slurry prepared with latex of approved brand, water and cement in the proportion of (LP.W. Cement - 1:4:6) by volume, with brush in a time gap of minimum 4(four) hours to 14(fourteen) hours between the two layers, laying 20mm thick and sand and cement consolidated plaster (1:4) admixed with Plastocrete Super of approved brand 0.2% by weight of cement, laying flat 1st class Brick Bats / Bricks over the mortar keeping a gap of 10-20 mm between two bats, filling the vertical joints with the aforesaid mortar, providing a second layer of 20 mm thick sand and cement plaster (1:4) admixed with Plastocrete Super as above over the brick layer, the top surface of the treatment should be chequered to provide the antistrip property. (a) By Bricks (cement 25.66 kg/ Sq.m) | 1400027568_32 | 90 | Sq.m |
|---|
| 33 | 33 | Painting -Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\n(a) On timber or plastered surface : \n (iv) Two coats (with any shade except white) | 1400027568_33 | 272 | Sq.m |
|---|
| 34 | 34 | Painting : (b) On steel or other metal surface : description of work as per item 30 , Two coats (with any shade except white) | 1400027568_34 | 20 | Sq.m |
|---|
| 35 | 35 | Glass Panes: Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & up to 6m height for external wall)\n (i) 3 mm thick (weighing 7.4 kg/Sq.m) | 1400027568_35 | 10 | Sq.m |
|---|
