Fabrication Of Iron Materials At District Stores, Nalgonda- 1 Fabrication of MS Back Clamps with 50x6mm MS flat suitable for 9.1 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 2 Fabrication of LT 3-Phase 4 wire Cross arm with 50x50x6mm or 65x65x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 3 Fabrication of LT 3-Phase 5 Wire Cross arms with M.S. Angle 50x50x6mm Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 4 Fabrication of MS Stay Clamps (Set) with 50x6mm MS flat suitable for 9.1 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 5 Labour charges for fabrication of LT/11KV Top insulator fittings without Clamps with MS Channel 75x40 mm including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 6 Fabrication of 33KV Back clamps with 75 x 8 mm MS Flat including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 7 Fabrication of LT/11KV MS Stay sets without Base Plate, with 16 mm / 20 mm dia MS rods and 75 x 40 mm MS Channel or 65 x 65 x 6mm MS angle including supply of 20 mm nut, cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 8 Fabrication of 11KV V. Cross arms 1.07 mt with 65 x 65x 6 mm MS angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 9 Fabrication of 11KV Top insulator fitting without clamp, with 65x65x6 mm MS angle, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 10 Fabrication of 33 KV Stay Clamps (set) MS flat 75x8 mm for 9.1 Mtrs PSCC poles including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 11 Fabrication of 33KV V. Cross arms 1.53 Mt. without Clamp, with 100x50 mm MS Channel & 75x8 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 12 Fabrication of 33KV Top insulator fitting without clamp, with 100 x 50 mm MS Channel for 9.1M pole including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 13 Fabrication of 33KV MS Stay sets without Base Plate, with 20 mm dia MS rods and 100 x 50 mm MS Channel or 65 x 65 x 6mm MS angle including supply of 20 mm nut, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 14 Fabrication of 11KV Tapping Channel with MS Channel 75x40mm, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 15 Fabrication of 11KV V. Cross arms 1.07 mt with 75 x 40 mm MS Channel including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 16 Fabrication of LT 1 Ph 2 wire Cross arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 17 Fabrication of Guide Channel for 8.0M/9.1M Poles with MS Channel 75x40mm, including Cutting, Drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 18 Fabrication of LT Back Clamps with 50 x 6 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 19 Fabrication of M.S. Stay Clamps with M.S. Flat 50x6mm, for 8 Mtrs. PSCC poles including Cutting, Drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 20 Fabrication of 8.0/ 9.1M Pole Guide Clamps with 50x6mm M.S. Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 21 Fabrication of 33KV V. Cross arms without Clamp for 11M poles, with 100x50 mm MS Channel & 75x8 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 22 Fabrication of 33KV Top insulator fitting without clamp, with 100 x 50 mm MS Channel for 11M Pole including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 23 Fabrication of MS Back Clamps with 75x8 mm MS flat suitable for 11 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 24 fabrication of 33 KV Stay Clamps MS flat 75x8 mm for 11 Mtrs PSCC poles including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 25 Fabrication of 33KV Top insulator fitting With clamp, with 100 x 50 mm MS Channel & 75X8mm Flat for 11M including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 26 Labour charges for fabrication of LT Top insulator fittings without Clamps with MS Angle 50X50X6 mm including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 27 Labour charges for Fabrication of LT 1-Phase 3 wire Cross arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 28 Labour charges for Fabrication of LT 3-Phase 5 wire side arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 29 Labour charges for Fabrication of HT/LT Top cleats for 9.1M Pole with 65x65x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 30 Fabrication of 33KV Top insulator fitting With clamp, with 100 x 50 mm MS Channel & 75X8mm Flat for 9.1M including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint.
