Dismantling And Removal Of Existing Brick Wall / Column By Manually / By Using Mechanical Tools With A Height Up To 5M And Removal Of Debris Within A Lead Of 500M, Etc. Complete As Per The Direction Of Engineerincharge. Dismantling And Removal Of Existing Rcc Foundation / Column / Wall By Manually / By Using Mechanical Tools With A Height Up To 5M And Removal Of Debris Within A Lead Of 500M, Etc. Complete As Per The Direction Of Engineerincharge. Supplying, Providing And Laying Brick Masonry In Cm 1:6 Using Well Burnt Country Brick Of Minimum Size 22.9X11.2X7cm For Foundation / Kerb Wall / Wall Upto 4.5M Height From Ground Level Including All Scaffolding, Staging, Curing, Etc. Complete Complying With Standard Specifications And As Directed By The Engineerincharge Supplying, Providing And Laying Pcc 1:2:4 Mix For Foundation / Flooring Work Using 20Mm And Below Grade Hard Blue Granite Jelly Including All Form Works, Mixing, Laying Consolidation And Curing, Etc. Complete As Per Standard Specifications And As Directed By The Engineerincharge Supplying, Plastering With Cm 1:4 Mix 15Mm Thick One Coat Floated Hard & Trowelled Smooth Etc For Floors & Walls Upto 3.5M Height Complete Complying With Standard Specifications And As Directed By The Engineerincharge. Supplying & Painting Two Coat Of Tractor Emulsion Of Approved Shade For Internal & External Surface Walls Over A Coat Of Cement Primer ( Berger / Asian / Shalimar ) Including Thorough Scrapping, Cleaning, Removal Of Dirt, All Tools & Tackles, Scaffolding, Etc. Complete Upto 3.5M Height From Ground Level As Per Specification And As Directed By Engineerincharge. Dismantling, Lowering The Existing A.C. / Aluminium Sheets From Roof / Side Cladding Of The Buildings Without Any Damage Either For Repairing The Existing Steel Roof Trusses & Purlins Or Replacing The Damaged Sheets, Etc. And Refixing The Same Area With New A.C. Corrugated / Trafford ( Everest / Ramco Brand ) Roof Sheet With 8Mm Dia G.I. Polymer Coated Bolts & Nuts To Suit The Existing M.S. Angle / Channel, Purlin, Etc. Complete As Per Standard Specification And As Directed By Engineerincharge. ( Rate Including Cost Of All Materials ) . Dismantling, Lowering The Existing A.C. / Aluminium Sheets From Roof / Side Cladding Of The Buildings Without Any Damage Either For Repairing The Existing Steel Roof Trusses And Purlins Or Replacing The Damaged Sheets, Etc. And Refixing The Same Area With Departmental Dismantled Reusable C / Aluminium Sheet With 8Mm Dia New G.I. Polymer Coated Bolts & Nuts To Suit The Existing M.S.Angle / Channel, Purlin, Etc. Complete As Per Standard Specification And As Directed By Engineerincharge. ( Rate Excluding Cost Of A.C. / Aluminium Sheets ) . Dismantling And Removing Of Damaged Steel Structural Fully / Partly Such As Roof / Side Cladding, Purlin, Trusses, Bracings, Columns & Gates, Etc. And Refixing The Damaged Members Of Dismantled Structures With Dismantled Good Steel Members ( Necessary Fabrication To Be Done If Required ) / New Fabricated Steel Structures ( Under Item No.10 ) With Welded / Bolted Joints With The Existing Structures, Etc. Upto 15M Height From Floor Level As Directed By The Engineerincharge ( Rate Excluding The Cost Of Good Reusable Steel & New Fabricated Steel Under Item No.10 ) . Supply Of Steel And Fabricating The Portion / Full Of Truss / Purlins / Bracing / Columns / Gates, Etc Including Cutting, Welding, Jointing To Suit The Dismantled Portion For Replacing The Wornout Members Of The Existing Trusses / Purlins / Bracings / Column / Gates Or Full Members, Etc. Complete As Directed By Engineerincharge. ( Rate Including Cost Of All Materials ) ( Structural Steel Conforming To Is 2062:2011 Of Make Tisco / Sail / Rinl ) Dismantling, Lowering The Existing Aluminium / Acsheets From Ridges Of The Buildings Without Any Damage Either For Repairing The Existing Steel Roof Trusses & Purlins Or Replacing The Damaged Sheets, Etc. And Refixing The Same Ridges Area With New Ac Ridges ( Ramco / Everest Brand ) Roof Sheet With 8Mm Dia G.I. Polymer Coated Bolts & Nuts To Suit The Existing M.S. Angle / Channel, Purlin, Etc. Complete As Per Standard Specification And As Directed By Engineerincharge. ( Rate Including Cost Of Materials ) . Supplying And Painting Two Coats With Epoxy Coal Tar Paint ( Asian / Berger / Shalimar ) Over A Coat Of Epoxy Zincchromate / Zincphosphate Primer ( Asian / Berger / Shalimar ) Including Chipping, Scrapping And Cleaning The Surface, Etc. Complete As Directed By Engineerincharge
