O&M Of Mechanical Equipments For Infal, Out Fall & Escape Regulators And Ot Gates Of Tgp Main Canal (2Nd Call), Kurnool-Andhra Pradesh

Operation And Maintenance Of Mechanical Equipments For Infal, Out Fall & Escape Regulators And Ot Gates Of Tgp Main Canal ( 2Nd Call ) .- 8.00 Galvanized Ms Flat Clamp 4.00 Alloy Steel ( Is : 1570-Stainless Steel ) Pins 8.00 Bolt / Nut / Washer ( Stainless Steel ) 99.00 Gear Oil 125.00 Grease 22.00 Rubber Bottom Seal ( Is : 11855 ) ( 100Mmx14 Mm ) 102.40 Rubber Side Seal ( Music Note Type Uncladed ) ( Is : 11855 ) 173.52 Mild Steel-Hollow Pipes ( 1 Dia, 3.2Mm Thick ) 17.98 Mild Steel L-Angles ( 40X40x3 ) 2.00 Welder 8.00 Welding Set-Hired 40.00 Welding Electrodes 20.00 Electrician 1084.82 E.M Parts Of All Types Of Gates Surface Cleaning Of Metal Surfaces By Chemical Cleaners And Then By Hand And Power Tool Cleaners And Removing Dust. After Cleaning, Applying Primary Coat With One Coat Of Protective Mastic To Athickness Of 70+5 Microns , Followed By Finishing Coats 2 Coats With Coal Tar Epoxy Each Coat With A Dft Of 150+5 Microns And Total Dft Of All Coats Including Primary Coat Should Not Be Less Than 350 Microns With Material, Labour And All Accessories With All Leads And Lifts ( In Respect Of Heavily Rusted ( 30 To 40% Rusted ) Surfaces ) 995.34 Hoist Bridges , Hoisting Equipment And Cranes, Etc, Surface Cleaning Of Metal Surfaces By Chemical Cleaners And Then By Hand And Power Tool Cleaners And Removing Dust. After Cleaning, Applying Primary Coat With Two Coats Of Zinc Chromite Red Oxide Primer , Followed By Finishing Coats 3 Coats With Synthetic Enamel Paint With Material, Labour, And All Accessories With All Leads And Lifts. Where Surface Cleaning By Sand Blasting Is Not Feasible And Based On Specific Recommendations Of Designers, It Is To Adopt Surface Preperation Done Manually By Hand And Power Tool After Cleaning By Chemical Treatment To Remove Grease, Rust, Scaling Etc., And To Form Phasphate Coating To Prevent Further Rusting, Before Applying Primer Painting.

Refer document

INR 14500.0 /-

INR 14.38 Lakhs /-