Supply , Installation , Testing And Commissioning Of Laboratory Furniture For Botany Lab . At Govt . Degree College Banihal . - 1 C / D-Frame System Nall C / D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 ( Indian Standard Specification For Steel Tubes For Furniture ) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. Nthe Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout. C / D-Frame Should Be Constructed From A Rectangular Pipe With A Cross Section Of 30Mm X 30Mm / 60Mm X 30Mm And Should Be A Minimum 1.6 Mm / 2.0 Mm Thick. The C / D-Frame Legs Should Be Supplied With Adjustable Feet ( Tolerance From -5Mm To +20Mm ) To Correct The Unevenness Of Flooring. The Tubular Enclosed Type Construction Shall Discourage Dust Accumulation And Unwanted Development Of Bacteria & Fungus. Drainage Gradient Should Be Well Adjusted Throughout The Length Of Table And Should Have Horizontal Supports For Drainage Systems. The Corner Units Shall Fit Well With 770Mm & 920Mm Table Depths. All Frame-Work Is Should Be Pre-Treated With Superior Pure Epoxy Powder Coated Finish. Nthe C / D-Frames Should Be For Suspended Storage Cabinets Nhorizontal Members Nthese Should Be Made From Rectangular Pipes Of 2Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30Mm X 30Mm / 60Mm X 30Mm With A Minimum Of 1.6 Mm Thick. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two C / D- Frames Together As Shown Using C-Clamps / U-Clamps. Together With The C / D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member ( Distance ) Between Two Adjacent C / D-Frames. They Should Be Available In Various Widths Of 600, 900, 1200, 1350, 1500 Mm 2 Supply & Fixing Of Storage Boxes Of Measurements, 1 Drawer & 2 Shutters Of Size L-750 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 3 Supply & Fixing Of Storage Boxes Of Measurements, 1 Drawer & 2 Shutters Of Size L-600 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 4 Supply & Fixing Of Storage Boxes Of Measurements With 1 Shutter Of Size L-850 + 850 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 5 Supply & Fixing Of Sink Storage Boxes Of Same As Above Measurements, Fitted With Sink, Made Up Of 5 Mm Thick High Density And Elastic Polypropylene With Bowl Size ( L X W X D ) Is 560 X 340 X 295Mm. Each Sink To Be Provided With A Bottle Trap & Hose Pipe. A 3-Way Tap To Be Be Provided With The Sink Unit, Which Should Have 2 Fixed Bib Cocks & One Swan Neck Swivel Cock Made In Brass And Heavy Duty Knobs. 360 Swing Goose Neck Spout With Brass Head Work. Of Size L-1400 Mm X D-530 Mm X H-635 Mm. Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 6 Supply & Fixing Of Sink Storage Boxes Of Same As Above Measurements, Fitted With Sink, Made Up Of 5 Mm Thick High Density And Elastic Polypropylene With Bowl Size ( L X W X D ) Is 560 X 340 X 295Mm. Each Sink To Be Provided With A Bottle Trap & Hose Pipe. A 3-Way Tap To Be Be Provided With The Sink Unit, Which Should Have 2 Fixed Bib Cocks & One Swan Neck Swivel Cock Made In Brass And Heavy Duty Knobs. 360 Swing Goose Neck Spout With Brass Head Work. Of Size L-600 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 7 Supply & Fixing Of Storage Boxes Of Measurements, 1 Drawer & 1 Shutter Of Size L-450 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 8 Supply And Fixing Of Knee Space Having One Footrest Made Up Of 1Mm Thick Sheet ( 25X50x25mm C Channel Type And Openable Back Cover Panel Of 0.8Mm Thickness With Length : 9 ( A ) L-750 Mm. Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications 10 ( B ) L-600 Mm. Complete With Sefa-10 Compliant ‘C’ / D Frame System Having C Legs & Connecting Sets As Per Technical Specifications 11 Providing And Fixing Of All Side Cover Panels And Back Panels, Filler Panels To Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating. Size : 185Mm X835mm With 15Mm Bend On All Sides. 12 Pegboard - Acrylic With 23 Pegs ( 600 X 600Mm ) 13 Providing And Fixing Two Tier Regent Rack To Be Fixed At Suitable Places Wherever Required, To Be Made Of 0.8 Mm Thick Crca Sheet, With Both Sides Coated With Epoxy Based Powder Coating Cwith Omplete Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves; With An Integrated Raceway Of Minimum Height 205 Mm, Full Length Made Up Of Crca Ms With Pure Epoxy Powder Coating And Having One Cutout For 6 Module Plate ( On Each Side Of Island Regent And One Side Of Wall Regent Rack ) For Electrical Switches And Sockets. The Racks To Be Provided With The Following Dimensions: N Island Table - L-750 / 900 / 1200 / 1500 Mm X D-300 X H-650 Mm. N Wall Table - L-750 / 900 / 1200 / 1500 Mm X D-150 X H-650 Mm. N Size L-1200 X D-300 X H-643 Mm 14 Single Sided Crca Electrical Raceway Max L-2M, H-125 X D-85 Mm Top / Wall Mounted With 3 Nos. 6 Module Cut-Outs 15 The Electrical Sockets Procured From Norisys / Legrand / Roma / Anchor Greathwhite Or Equivalent To Be Placed On The Face Of The Regent Rack, Without Wiring 16 Providing And Fixing Of The Worktops Of Size 18Mm± 2 Mm Jet ( Z ) -Black Granite Of An Even Surface. The Exposed Edges Of The Granite To Be Chamfered And Smoothened With Underneath Neoprene Packing Of Size 6 Mm X 30 Mm So As To Have Dampening Effect And Better Absorption Of Vibration. 17 Laboratory Chair- Medium Rise With Ring With Twin Wheel Casotrs Back Size : 47.5 Cm ( W ) X 58.0 Cm ( H ) - Approx.Seat Size : 47.0 Cm ( W ) X 48.0 Cm ( H ) - Approx. Nseat Size : 47.0 Cm ( W ) X 48.0 Cm ( H ) - Approx. 18 Lab Stools Noverall Size H470 Min-655Max Ss 202 Made Sheet With Spin Section Of Thickness 1Mm & Should Be Non Corro-Sive. It Should Have A Diameter Of 305Mm, Seat Base Is Made Of Ms Ring And Revolving Base. Gas Cylinder Should Be Used For Height Adjustment Of The Seat Base. The Base Should Be Made Of Chrome Plated Materi-Al And Heavy Duty Castors. Cushioned Seat Should Have Foam Of Minimum Density 40 Kg / M3 And Made Up 1.2+ / -0.1Cm Thick Hot Pressed Ply-Wood Upholstered With Re-Placeable Fabric Or Synthetic Leather Upholstery Covers And Molded Polyurethane Foam. 19 Full Height Storage With Steel Shutters, Size H-1980 X W-910 X D-480 With 4 Shelves Making 5 Compartments, Snap-Shut Locking System
