Rate Contract For Steel Furniture.- 1 1 Steel Cabinet With Side, Doors, Back, Top, Bottom, Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm And 15Mm Depth. Right Door Shall Be Of 0.8Mm Having Metal Stiffeners Suitably Riveted To Stiffen The Door. The Centre To Centre Distance Between Two Adjacent Rivets Shall Not Exceed 200Mm. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of 1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. 2 1.01 I- Size 1980X825x455mm With Five Shelves Making Six Compartments, Duly Spray Painted; Product Code: Sf-1 1 No. 3 1.02 Ii- Size 1980X825x455mm With 5 Shelves Making 6 Compartments With Extra Locker Inside, Duly Spray Painted. Product Code: Sf-2. 1 No. 4 1.03 Iii- Size 1320X760x430mm With Three Shelves Making Four Compartments, Duly Spray Painted; Product Code: Sf-3. 1 No. 5 1.04 Iv- Size 1320X760x430mm With 3 Shelves Making Four Compartments With Extra Locker Inside, Duly Spray Painted. Product Code: Sf-4. 1 No. 6 2 Steel Wardrobe Size 1900X800x610mm, With Three Shelves, Half Locker And Hanging Made From 0.8Mm Sheet. Locker Door Shall Be Constructed From Minimum 1.6Mm Thick Sheet. All Other Specifications As Above. Product Code: Sf-5. 1 No. 7 3 Steel Wardrobe Size 1250X800x425mm, With Three Shelves, Half Locker And Hanging Made From 0.8Mm Sheet. Locker Door Shall Be Constructed From Minimum 1.6Mm Thick Sheet. All Other Specifications As Above. Product Code: Sf-5. 1 No. 8 4 Steel Wardrobe Made Of 22 Gauge Double Door Having Separate Cabins With Partition. The Two Separate Cabins Having Separate Locking Arrangements For Sfe And Shelf. The Whole Assembly Duly Welded And Spray Painted Size 36-1 / 2”X78”X21-1 / 2”. 1 No. 9 5 Steel Glass Door Cabinet Size 1980X825x455mm With Five Shelves, Sides, Top, Bottom, Back, Shelves And Legs Shall Be Of 0.8Mm Thick Sheet And Doors Of 1Mm Thick Sheet, Duly Spray Painted And Fitted With 4Mm Glass. Other Details As Per Sr. No. 1 Above.Product Code: Sf-6. 1 No. 10 6 Steel Book Case Size 1675X825x305mm With Four Disappearing Glass Doors. Sides, Top, Bottom, Back, Shelves, And Doors Shall Be Made Of 1Mm Thick Sheet. Sliding Glass Doors Shall Swivel, Side On Suitable Guides, Which Shall Consist Of Box Fitted With One Roller And Fitted With 10X3mm Flat Iron. Thickness Of Glass Shall Not Be Less Than 4Mm. Each Door Shall Be Fitted With Individual Lock Of Six Levers. Two Chrome Plated Handles Shall Be Fitted To Each Glass Door. Product Code: Sf-7. 1 No. 11 7 Steel Rack Made Out Of Slotted Steel Angle Posts Of 35X35x1.6Mm Having Holes 10Mm Dia Provided At 50Mm Centre. Shelves Shall Be Of 1Mm Thick Sheet With Lipped Flanges Of 30Mm Width And 15Mm Depth. Eight Gussets, Four On Each Face Of The Rack Shall Be Fitted. Thickness Of Gussets Shall Not Be Less Than 1Mm And Length 75Mm. Enamel Finish. 1 No. 12 7.01 A- Size 810X380x760mm With 3 Shelves ( Sf-8 ) 1 No. 13 7.02 B- Size 810X380x1980mm With 6 Shelves ( Sf-9 ) 1 No. 14 8 Writing Table, Drawer Box Shall Be Made From 0.8Mm Thick Sheet And Made From One Piece Sheet And Tack Welded At The Final Overlapped Corner. Drawer Box Shall Have Lipped Flanges Properly Stiffened With Stiffners. Drawers Shall Be Made Of 0.8Mm Thick Sheet. Pull-Out Sldies And Drawer Guides Shall Be Made Of 1Mm Thick Sheet. Locker Body Shall Be Made Of 0.8Mm Thick Sheet With Locker Door And Shelf Of 1Mm Thick Sheet. The Drawer And Locker Body Shall Be Bent To Box Shape Of Size 430X355x560mm Lipped Flanges Shall Also Be Provided At Back Which Shall Be Bent Inside To Seat The Back. The Back Shall Be A Push Fit And Tack Welded. Each Drawer Shall Be Fitted With Individual Locks Of Six Levers And Cupboard Shall Also Be Fitted With Six Lever Lock. Drawer Shall Have Chrome Plated Handle And Locker Door With Knob. Tubular Frame Shall Be Made Of 25X1.25Mm Square Pipe. Top Shall Be Of 18Mm Thick Prelaminated Particle Board. 1 No. 15 8.01 A- Size 1525X915x760mm With 3 Drawers And Cupboard. Frame Dimension 740X1370x560mm ( Sf-13 ) . 1 No. 16 8.02 B- Size 1525X915x760mm With 3 Drawers On One Side Only. Frame Dimension 740X1370x560mm ( Sf-14 ) . 1 No. 17 8.03 C- Size 1220X760x760mm With 3 Drawers Only. Frame Dimension 740X1065x560mm ( Sf-15 ) . 1 No. 18 9 Officer’S Table Size 1500X900x750mm, Back Closed By 24 Gauge Cr Sheet With 3 Drawers And Cabinet Made Of 24 Gauge Cr Sheet, Upper Frame Made Of 1Mm Thick Sheet And Legs Made Of 1”X1”X18 Gauge Square Pipe Of Crc Spray Painted. Table Should Be Fitted With Nova Pan Top Of 19Mm With Plastic Beading. 1 No. 19 10 Computer Table Size 900X600x750mm With 2 Shelves Of Size 300X300mm And 300X375mm Including Key Board Shelf. Based Made Of 1”X1”X18 Gauge Square Pipe Fitted With Nova Pan Top Of 19Mm Block Board. 1 No. 20 11 Steel Executive Table Size 1800X900x760mm, All Sides Closed With 19Mm Novo Pan Top With 3 Drawers, Made Of 24 Gauge Cr Sheet. Upper Frame Made Of 1Mm Cr Sheet And Legs Made Of 1-1 / 4”X1-1 / 4”X18 Gauge Square Pipe, Spray Painted With Plastic Beading. 1 No. 21 12 Student Desk For Two Students, Top / Seat Of 19Mm Board Properly Polished Duly Lipped With 19Mm Half Round Beading In All Sides, Seat Size 915X200x460mm ( H ) , Top Table Size 915X355x760mm ( H ) , Support Frame Of Square Pipe Consisting Of 8 Legs, Complete Rectangular Frame Under The Table / Seat Jointed Properly Made From 25Mmx1.25Mm Square Pipe. The Vertical Gap Between The Table And Seat Shall Not Be Less Than 360Mm For Smooth Movement Of Students.Product Code: Sf-36. 1 No. 22 13 Student Desk For Single Student, All Specifications As Above Of Sr. No. 11, Except Table Size 625X355mm, Height 760Mm, Seat Size 625X200mm, Height 460Mm.Product Code: Sf-37. 1 No. 23 14 Steel Folding Dining Table Size 1830X1220x765mm Legs Of 30X1.25Mm Square Pipe With Supports Of 25Mmx1.25Mm Square Pipe. Top Of Pre-Laminated Particle Board Of 19Mm Thick On Frame Of Angle Iron 35X35x5mm With Adequate Supports. Product Code: Sf-41 1 No. 24 15 Steel Bed Size 1930X915mm With Folding Legs. Frame Shall Be Made From 30X1.6Mm ( Or 38X20mm Ms Round Pipe Having Four Round Hooks Of 25Mm Diameter. Legs Shall Be Folded With The Help Of U Shaped Brackets Of 2Mm Thickness. Legs Shall Be Reinforced With 25X1.6Mm Round Pipe Fitted With Nawar. 25 15.01 A ) Nylon 1 No. 26 15.02 B ) Cotton 1 No. 27 15.03 C ) ( 19Mm B / B Product Code: Sf-33 ( A&B ) . 1 No. 28 16 Steel Easel Of 1520Mm Height Made From 25Mmx1mm Round Pipe. One Support Of 25Mmx1mm Pipe Shall Be Provided At Rear. The Support Rod Shall Be Fitted With Hook Made From 8Mm Thick Ms Round To Prevent The Easel From Tilting. Two U Type Hooks Of 8Mm Ms Round Shall Be Provided In Front To Hold The Black Board.Product Code: Sf-30. 1 No. 29 17 Steel Bench With Arms With Arms, Size 1830X380mm. Frame Made Of 25X1.0Mm Round Pipe. Seat And Back Shall Be Made From 1Mm Sheet. Back Rest Shall Be 200Mm Wide. The Seat And Back Shall Have Lipped Flangers Of 25Mm Width And 15Mm Depth. Top Of The Back Shall Be 815Mm High From Ground Level And Seat 460Mm High. Enamel Finish. Product Code: Sf-31. 1 No. 30 18 Steel Bench Without Arms And Back Rest Size 1830X380mm. Other Specifications As At Sr. No. 16 Above. Seat Height From Ground Level Shall Be 460Mm. Product Code: Sf-32. 1 No. 31 19 Garden Bench Of Size / Length 6’ Made Of Ornamental Costiron Sides And 10 Stripes Of 2”X1”X16 Gauge Rectangular Pipe In The Middle Of The Strip, 4 Mm Flat Shall Be Fitted For Handling Weight. 1 No. 32 20 Officer Revolving Chair Superior Type Having 100Mm Rubber Seat And Back With U-Foam Arms Fitted With Hexagonal Steel.Sf-25. 1 No. 33 21 Revolving Chair Frame Of 20X1.25Mm Round Pipe With Pu Handle, With H.D. Foam Cushion Of 75Mm In Seat And 50Mm At Back Covered With Superior Tapestry Cloth. Sf-26. 1 No. 34 22 Computer Chair Revolving With Manual Base Having High Density Foam Seat, Cushion Of Seat 75Mm And Back Of 45Mm With Pu Arms. Sf-28. 1 No. 35 23 Computer Chair Revolving With Manual Base Having High Density Foam Seat, Cushion Of Seat 75Mm And Back Of 45Mm Without Arms. Sf-29. 1 No. 36 24 Steel Tubular “S” Type Office Chair With Continuous Arms. Frame Shall Be Made Of 25X1.6Mm Round Pipe. Seat And Back Shall Be Of Teak Wood Frames With Natural Teak Colour Polish, Woven With Superior Cane. The Seat Shall Be Reinforced With U Shaped Flat Iron 10X3mm. Size Of Seat Shall Be 450X420mm And Size Of Back Shall Be 400Mm And Top Of Back 865Mm. Arms Shall Have Maximum Curve In Front For Comfort. Sf-20. 1 No. 37 25 Steel Tubular “S” Type Office Chair With Continuous Arms. Frame Shall Be Made Of 25X1.6Mm Round Pipe. Seat And Back Shall Be Of Teak Wood Frames With Natural Teak Colour Polish, Woven With Superior Cane. The Seat Shall Be Reinforced With U Shaped Flat Iron 10X3mm. Size Of Seat Shall Be 450X420mm And Size Of Back Shall Be 400Mm And Top Of Back 865Mm. Arms Shall Have Maximum Curve In Front For Comfort Seat Having 50Mm Foam Seat And Back 35Mm. Sf-20 1 No. 38 26 Steel Office Chair Frame Of 25X1.6Mm Round Pipe, Seat Back Of 12Mm Ply Wood With 75Mm High Density Foam Cushion Seat And 50Mm High Density Foam Back Covered With Tapestry Cloth. Sf-21. 1 No. 39 27 Revolving Chair ( Executive Type ) With Gas Lifting And With High Back Pu Arms, Plastic Base Of Superior Quality With Cushions.Sf-24. 1 No. 40 28 Steel Chair With Writing Pad, Made Of M.S. Square Pipe, 25Mmx1mm With Full Arms, Fitted With 12Mm Thick Ply Board, Seat And Back Duly Fitted With Supports And Spray Painted. 1 No. 41 29 Steel Pigeon Hole Locker Having 12 Pigeon Holes Size 78”X33”X18” With Individual 6 Lever Locks And Knobs, Fully Made Of 0.8 Cr Sheet, Duly Spray Painted. 1 No. 42 30 Same As Above Having Size 52”X33”X17” With 8 Pigeon Holes. 1 No. 43 31 Steel Filing Cabinet Box Type With Top, Bottom And Sides Made Out Of 0.80 Mm C.R Sheet, Drawers Made Out Of 0.63Mm Placed On Superior Channels Of Branded Quality With Single Locking Arrangement On Front Top As To Lock All The Drawers Simultaneously With Label Holders And Handles. The Locking Arrangement Shall Be Made From Steel Sheet Not Less Than 1.6Mm Thick , All Assembly Properly Bended / Cutted And Painted As Per The Following Sizes. 44 31.01 Two Drawers 750Mmx700 Mmx470 Mm 1 No. 45 31.02 Three Drawers 1080Mmx700 Mmx470 Mm 1 No. 46 31.03 Four Drawers 1380Mmx700 Mmx470 Mm 1 No. 47 32 Visitor Chair, Made From Drawn Section Pipe, Powder Coated Chrome Platted / Having U-Foam In Seat And Back Upholstered Neatly In Superior Fabric With Special Contour In Back. 1 No. 48 33 Supply Of Two Seater Bench Of Size 3’X6’ Long. Frame Structure Made Of 1” Dia Square Pipe, Top Of Bench Shall Be 15”, Seat 13” And Back Of Bench Shall Be 10” Seat Back And Top Of Bench Completely Made Of 12Mm Kitlam Ply. One Shelf Made Of 0.80Mm Cr Sheet Bench With Desk Top 1 No. 49 34 Teapoy ( Glass Top ) Size 20X36 Inch Stainless Steel Heavy Frame Chrome Plated With 5Mm Thick Semi Transparent Glass Top Decorative Type And One Under Shelve Made Of Glass. 1 No. 50 35 Peg Table Of Size 18X20 Inch Stainless Steel Heavy Duty Frame Chrome Plated With 5Mm Semi Transparent Glass Top Decorative Type And One Under Shelf Made Of Glass. 1 No. 51 36 Officer’S Chairs: Stainless Steel Full Back Arched As Per Medical Norms, 18 Inch Wide Seat Filled With 3 Inch Dunlop On Seat And Back Covered With High Quality Cloth Chrome Plated Steel Arms Fitted With High Quality Arm Rest, Hydraulic Type Lift, Movable With Heavy Duty Base And Wheels. 1 No. 52 37 Officer’S Table, Size4 30X60 Inch, Stainless Steel Frame Of 1 Square Inch Iron 1.5Mm Thick With Twin Support Bars, Dulmica Top On 20Mm Ply Board, Round Edges Protected By Aluminum Decorated Cornice With Following Features: 53 37.01 A ) 3 Drawers 15 Inch Wide On Right Side, 22 Gauge Steel With Heavy Duty Steel Handle And Central Lock Facility, Freely Movable On Rails With Check Guard. 1 No. 54 37.02 B ) Cabin 20X24 Inch On Left Side Made Of Steel 24 Gauge Sheet With Door And Heavy Duty Lock. 1 No. 55 37.03 C ) Metallic Painted Grey Colored On All Steel Structure With Steel Premier Base. 1 No. 56 38 Steel Bed Fabricated Out Of Isa 35X35x6mm For Frame And 1-1 / 2” Dia Steel Pipe For Legs And Legs Supported With Cross Strips 16 Gauge Sheet. The Floor Of Bed Covered With 19Mm Board. The Whole Assembly Properly Welded And Painted. Size 76”X36”X16-1 / 2” 1 No. 57 39 Steel Table Top Of 19Mm Board Laminated, Square Pipe 1” Frame And 1” Round For Legs, Having One Drawer Duly Spray Painted Size 4’X2-1 / 2’X2-1 / 2’. 1 No. 58 40 Steel Chair Made Out Of 1” Round Pipe Seat And Back Covered With Novapan Board 19Mm Duly Painted Seat Size 18”X16-1 / 2”, Back 16-1 / 2”X12” 1 No. 59 41 Supply Of Steel Tool-Cum Desk / Bench, Assembly Made Out Of Square Pipe 1”X1”X22” Gauge Having Eight Legs, Seat Back And Desk Top Made Out Of 19Mm Board Lipped With 4Mm Teak Wood, Properly Spray Painted And Half Rounded Beading On All Sides: Seat Size 12”X35” Back Size 10”X36” Bench Top Size 14”X30” 1 No. 60 42 Locker / Steel Almirah, Fully Made Of 20 Guage Prime Cr Sheet Having 5 Shelves Making 6 Compartments, Each Shelve Shall Be Formed Such That The Edges And Bend Two Times At Right Angle, First Bend 25Mm And Second Bend 8Mm, 03 Hinges In Each Door ( Double Door ) Locking Arrangement With Lock- 7 Lever Lock, Standard Quality Handle And Door Stiffer From Inside To Its Full Length Grey Colour Painted. Size 36”X 18” X 72”. 1 No. 61 43 Steel File Cabinet 4 Drawer Type Width 47 Cm, Depth 62Com, Height 132Cm Smooth Drawer Movement With Double Extegension Telescopic Slideswith Heavy Duty Ball Bearing, Anti Rebound Mechanism Anti Tipping Mechanism, Anti Corrosion Treatment Forsteel Components High Quality Painted. 1 No. 62 44 Glass Door Almirah For Library: Width 36”, Depth 18”, Height 72” Having 5 Shelves Sheet Thickness 20 Gauge Prime Cr Sheet, Each Shall Be Formed Such That The Edges And Bend Two Times At Right Angle, First Bend 25Mm And Second Bend8mm, 03 Hinges In Each Door ( Double Door ) Locking Arrangement With 7 Lever Brass Lock, Standard Quality Handle And Door Stiffener From Inside, 2Mm Glass In Each Door Of 5Mm Thickness, Fitted In Rubber Gas Kit, Grey Colour Painted. 1 No. 63 45 4-Drawer Steel Book Case Fabricated Out Of 20 Gauge Cr Sheet Size Width 1736Mm, Width 914Mm, Depth 320, 4 Compartments Each Compartment Shall Be Provided With Glass Sliding Shutter With Suitable Handle And Inbuilt Lock, Thickness Of Glass Not Less Than 3Mm Steel Metal 0.9Mm Grey Colour Painted. 1 No. 64 46 Steel Rack Of 5 Shelves. Of 20 Guage , Racks Shall Be Manufactured From Slotted M.S Angle With Open All Sides, Shelves Gusset Plates Shall Be Manufactured From 18 Swgthick Sheet, Racks Shall Be Assembled With G.I Bolt Nuts And Washers, Slotted Angle And M.S Sheet Shall Be Made Of Cold Rolled And Shall Be Finished With High Quality Painted, Size Of Vertical Slotted Angle 35Mx35mmx2mm Thick, Ms Sheets Used For Racks Shall Be Made Of 20 Gauge, Cr Sheet Free From Any Defect, Undulations And Surface Corrosion Etc. Size 36”X18”72” 1 No. 65 47 Student Bed Size 3’X6’ Made Out Of Rectangle Pipe 2”X1”, Back Height 15”, Height From Ground 18” Supported With Five Members Of 1”X1” Fixed With Rubber Shoes Spray Painted With Flooer Of 12Mm Ply Board. 1 No. 66 48 Steel Pigeon Hole Made Of 20 Gauge / Prime Cr Sheet Highly Quality Grey Colour Painted Full Height Steel Hinges In Each Compartment Door, Hasp And Staple Locking Arrangement ( Good Made ) Standard Quality Handle / Knob For Each Compartment, Ventilating Louvers Size:W 12” X D15”X H12” Per Compartment ( Nine Compartments ) 1 No. 67 49 Student Dining Chair, Armless Heavy Duty Made Of Stainless Steel Of Standard Size, Press Lpu Foam Fixed Over 12Mm Ply On Seat ( Round Type Foam Rexine Covered ) . 1 No. 68 50 Steel Bench Cum Desk Two Seater With 18Mm Prelaminated Mdf Board With Seat Size 42X12 ( Inches ) , Top Size 42X15 ( Inches ) And Back 42X10 ( Inches ) Frame Made Out Of 25 Mm Sq. Pipe 18 Gauge Having Bottom Frame Size 36X38 ( Inches ) , Table Height 30 Inches And Seat Height 18 Inches , Having C.R Sheet Shelf Of 22G Beneath Table Top Duly Spray Painted As Per Sample 1 No. 69 51 Steel Office Table Of Size 4X2.5X2.5 Feet High Fabricated In 20 Gauge Round Pipe Of Dia 25Mm With Two Drawers Fitted In Box 24 Gauge Cr Sheet With Locking System , Top Covered With 18 Mm Mdf Pre Laminated Board , Steel Duly Spray Painted 1 No. 70 51.01 A ) Revolving Chair Executive Type With Push Type Chair Covered With Superior ( Velvet / Tapestry ) Cloth High Back 1 No. 71 51.02 B ) Revolving Chair With Push Type Chair Having Pu Seat And Back Tapestry Back , Base With Steel Chrome Plated Fitted With Coasters 1 No. 72 52.01 A. Supply Of Two Tire Bed Fully Made Out Of 2’’X1’’X2mm Thick Steel Pipe With Storage Cabin On Each Side Of The Bed Shall Bottom Side Of The Bed Dully Covered With Cr Sheet 0.63Mm For Storage Box. The Bed Have 12Mm Ply Board For Sleeping Arrangements. The Size Of The Bed 3’X6’X5’.6’’ ( H ) Dully Spray Painted 1 No. 73 52.03 B. Supply Of Two Tire Bed Fully Made Out Of 2’’X1’’X2mm Thick Steel Pipe With Storage Cabin On Each Side Of The Bed Shall Bottom Side Of The Bed Dully Covered With Cr Sheet 0.63Mm For Storage Box. The Bed Have 12Mm Ply Board For Sleeping Arrangements. The Size Of The Bed 3’X6’X5’.6’’ ( H ) Dully Spray Painted Without Storage Box 1 No. 74 53 Supply Of Steel Bed Of Size 6’X3’X1’.6’’ ( H ) Frame Made Out Of 2’’X1’’X2mm Steel Pipe With 12Mm Ply Board On Top. The Frame Of The Bed Dully Spray Painted. 1 No. 75 54 Supply Of Two Tire Student’S Beds Frame Made Of 1’’X1’’ 16 Gauge Ms Pipe Round. The 19Mm Board Fitted In 35X35x5mm Angles Connected With Ms Plate Strips To Rest The Block Board. The Stair To Facilitate The Students To Climb To Upper Story, The Front And Back Of Both Sides Are Made Of 12Mm Pre Laminated Board Fixed With 1’’X1’’ Angle For Safety Of The Student. The Whole Assembly Is Connected With Nuts And Bolts Duly Spray Painted. 1 No. 76 55 Display Magazine Rack Made Of 19Mm Thick Board Having 14 Holes All The 14 Holes Are Made Of Iron Sliding Consoles, Over .8Mm Thick Laminated All Exposed Surfaces ( Inner & Outer ) And Edges Are Covered With Beadings Size 6’X3’ Duly Melamine Polished. 1 No. 77 56 Revolving Display Rack Made Out Of Mesh Wire 20 Packets For Magazine.Size 6’ Height Revolving. 1 No. 78 57 Steel Visiting Chair Deluxe ( Godrej Patern ) 50Mm Foam Pressed Seat And Back, With Soft Pvc Arms, Frame Made Of 1’’ Round Ms Pipe Powder Coated Including Supported Clips Plate And Nut / Bolts. 1 No. 79 58 Steel File Cabinet ( Four Door ) Size: 54’’X27’’X18’’. Fabricated In 22 Gauge Cr Sheets And Allied Hardware With Independent Locking Arrangements Drawers Fixed On Durable Telescopic Channels Spray Painted. 1 No. 80 59 Steel Book Case ( Four Door ) Size: 72”X32”X15” Fabricated In 22 Gauge Cr Sheet, Door Moving On Durable Rado’S With Glass Panels, All Doors Fixed With Locks And Allied Hardware, Spray Painted. 1 No. 81 60 Steel Perforated Powder Coated Three Seater Lounge. 1 No. 82 61 Steel Office Table Of Size 4X2.5X2.5 Feet High Fabricated In 20 Gauge Round Pipe Of Dia 25Mm With Two Drawers Fitted In Box 24 Gauge Cr Sheet With Locking System , Top Covered With 18 Mm Mdf Pre Laminated Board , Steel Duly Spray Painted 1 No. 83 62 Steel Rack Made Of Swg Angle And Cr Sheets Fitted With Shoes And Shelves Made Of Rack Angle And Tap Fitted With 18 Swg Cr, Sheet Having 5 Shelves Making 4 Compartments. There Sides Of Racks Fitted With 18 Swg Cr Sheet Duly Painted With Having Dimension Height=6Ft, Gauge=18, Breadth=17” Width=4Ft, Shelves=05, Compartments=04 Sides=Covered 1 No. 84 63 Sheet Racks Made Of Swg Angle And Cr Sheets Fitted With Shoes And Shelves Made Of Rack Angle And Tap Fitted With 18 Swg Cr Sheet, Having 5 Shelves Making 4 Compartments There Sides Of Rack Fitted With 22 Swg Cr Sheets Duly Polished With Having Mission D.24”X1196”Xl48” 1 No. 85 64 Steel Cabinet With Side, Doors, Back, Top, Bottom, Legs And Shelves Of 0.8Mm Sheet Shall Have Lipped Flanges 25Mm And 15Mm Depth. Right Door Shall Be Of 0.8 Having Metal Stiffners Suitably Riveted To Stiffen The Door. The Center To Center Distance Between Two Adjacent Rivets Shall Not Exceed 200Mm. Left Door Shall Be Similarly Constructed As The Right Door And Shall Have A Rebate On The Free And Over Which The Right Door Shall Overlap. Legs Shall Be Made Of 0.8Mm Sheet And Should Not Project Out Of The Cabinet And Shall Be 125Mm In Height And Width ( Below The Flange Of The Sides ) . The Hinges Shall Be Double Fold Type Of1.25Mm Thickness Which Shall Be Secured On To The Brackets Of 2Mm Thickness. Number Of Hinges For Large Cabinet Shall Not Be Less Than Three Per Door And In Case Of Small Cabinet Two Per Door. The Cabinet Shall Have A Three Way Locking Device. Size: 78”X 24” X36” With Four Shelves Making Five Compartments Duly Spray Painted. 1 No. 86 65 Steel Pigeon Hole Locker Having 10 Pigeon Holes Size 78”X33”X18” With Individual 6 Lever Locks And Knobs, Fully Made Of 0.8 Cr Sheet, Duly Spray Painted. 1 No. 87 66 Steel Pigeon Hole Locker Having 06 Pigeon Holes Size 78”X33”X18” With Individual 6 Lever Locks And Knobs, Fully Made Of 0.8 Cr Sheet, Duly Spray Painted. 1 No. 88 67 Supply / Fixing Of Student Steel Bench Of Size 67X4X17 Made Of 50X50x6 Angle Iron And First Class Deodar Wood Topof Size 7X2x1.6 Duly Welded And Embeded In Cement Concrete Including Application Of Red Oxide Premiere And All Carriage Complete 1 No. 89 68 Supply / Fixing Of Student Steel Bench Of Size 6X4X17 Made Of 50X50x6 Angle Iron And First Class Deodar Wood Topof Size 7X2x1.6 Duly Welded And Embeded In Cement Concrete Including Application Of Red Oxide Premiere And All Carriage Complete 1 No. 90 69 Steel Glass Door Of Size 1320X760x430 Having Three Shelves Making Four Compartments Fully Made Of 22 Guage Cr Sheet Duly Spray Painted 1 No. 91 70 Lab Revolving Stool, Arms Chrome Plated Or Powder Coated, Plated Frame Gas Llift With Class Leatheritte Tapestry. 1 No. 92 71 Revolving Stainless Stell Stool, Round Seat 15 Inches 1 No. 93 72 Steel Almirah 22 Guage With 5 Shelves Duly Spray Painted 1 No. 94 73 Single Bed: Single Bed , Floor Frame Made Out Of Cr Tube Of Size 50X25mm Of 18Guage For Resting 12Mm Ply And 30X30mm Cr Pipe Frmae Of 18G To Be Used For Head And Foot Frames Duly Fitted By 12Mm Prelaminated Board Fixd With 20X20mm Cr Pipe. All Cr Ppes To Be Powder Coated 1 No. 95 74 Simple Bed: Single Ned Ade Out Of Hd Board With Melamine Finish Treatment Box Type With Curved Head And Foot Supports Of Size 36X75X18 1 No. 96 75 Hostel Bed: Regular Height Single Bed With Storage Made In Hd Board With Melamine Finish Treatment Size: 36Wx75Dx16H 1 No. 97 76 P / F Of Counter Cum Libarary Rack Fabricated In19mm Board Of Size ( 10X1.5X6.5 ) Feet Fixed With Cupboard Of Size ( 2.5X1.5X10 ) Feet At Bottom Each Supboard Having Two Sheves, Three Compartments Above Cupboard Provided With Open Rack With Detchable Notice Board Of Size 3X2 Fixed A T Centre Of Rack. The Board To Be Used Should Be Donair Or Equivalent Quality And Exposed Duly Laminated. All The Edges To Be Provided With Deodar Mouldings Duly Polished. The Inside Of Cupboard Duly Whit Painted And Notice Board To Be Fixed Blazer Cloth As Per The Approved Drawings. 1 No. 98 77 Laboratory Stool 15X12X24 Frsme Msd Of Hard Wood Duly Polished. 1 No. 99 78 Steel Visiting Chairs Deluxe ( Godrej Pattern ) 50Mm Foam Presses Seat And Back With Soft Pvc Arms, Frmaes Made Of 1 Round Ms Pipes Powder Coated Including Suport Clips Plate And Nut Bolts. 1 No. 100 79 Steel File Cabinet: 04 Doors Size 54X27X18 Fabri Cated In 22G Guage Cr Sheets And Allied Hardware With Independent Locking Arrangements Drawers Fixed On Durable Telescopic Channels Spray Painted. 1 No. 101 80 Steel Book Case: 4 Door Size 72X32X15 Fabricated In 22 Guage Cr Sheet Door Moving On Durable Rs With Glass Panels All Doors Fixed With Locks And Alied Hardware Apray Painted 1 No. 102 81 Visitor Office Chair Having Chrome Base And Frame Pu Cushion Seat And Back, Soft Arms 1 No.
