Providing & Erecting Double Bamboo Scaffolding As Required Along With Desired Approach System Near Building Entrance On The Exterior Side Of ?..At The Directed Locations And Disposing The Same Time To Time Outside The Colony Premises, All Complete As D-Maharashtra

Providing & Erecting Double Bamboo Scaffolding As Required Along With Desired Approach System Near Building Entrance On The Exterior Side Of ?..At The Directed Locations And Disposing The Same Time To Time Outside The Colony Premises, All Complete As Directed By The Banks Engineer. Carefully Dismantling Existing Rcc Sunshade / Chajjas Of Windows And Balconies Of 750Mm Appx. Width, Any Heights, With / Without Drops By Mannual / Hammer Drill To Form Small Concrete Pieces So That No Damage?..As Directed By Banks Engineer. ( Only Length In Plan Will Be Emeasured And Paid For ) Treatment To Corroded / Damaged Reinforcement And Replacing The Damaged Concrete Surface With Polymer Modified Cement Mortar As Specified Below??.. All Treatments Shall Be Done After Obtaining Clearance From Banks Engineer . Providing / Applying Additional Polymer Modified Cement Layer On The Surface Of 15Mm To 20 Mm Thick Mortar Over The Treated Surface Under Item No. 2 ( A ) Above, All Complete Done In Workmanlike Manner As Directed By The Banks Engineer Providing And Repairing The Various Damaged R.C.C Structural Members Like Columns, Roof Slabs, Beams, Lintels And Nonstructural Members Like Sunshades?..The Measurement Shall Be Considered On The Basis Of Actual Consumption Of Micro Concrete Excluding Wastage. Providing And Fixing Double Layer Of Expanded Poly Propylene Of 15 X 20 Mm Approx. ...... Thoroughly Pressed With 15 To 20Mm Size Metal Stones Doing Work At All Heights And Lifts, All Complete Done In Workmanlike Manner As Directed By The Banks Engineer. Providing And Applying External Plaster Using Ready Mix Cement Mortar Plaster Of Approved Make As Specified Below??The Rate Shall Also Include Making Edges For Columns, Beams Etc. Surface Preparation : The Existing Surface Shall Be Throughly Cleaned Of All Laitance, Loose Material, Oil Grease Etc. By Wire Brush. Treat All Surface Cracks By Opening It In V Groove Shape By Mechanical Means??.The Rate Shall Be Excluding Of Scaffolding Which Will Be Measured And Paid Under Item No. 1. Carefully Scrapping / Removing The Existing Paint Of Steel Work Preparing The Surface With Metal Enamel Based Paint Putty, Making The Surface Smooth?..The Rate Shall Be Excluding Of Scaffolding Which Will Be Paid Under Item No 1. Removing Loose Scales , Preparing The Surface Using Papers Applying Putty To Get Smooth And Even Surface Complete As Directed For Wooden Joineries Such As Doors, Windows, Ventilators , Balcony Wooden Railings Etc??.The Rate Shall Be Excluding Of Scaffolding Which Will Be Paid Under Item No 1. Providing And Fixing In Proper Line, Level And At Any Height, 600 Mm Wide ( Horizontal ) & Average 2.2 Mm Thick Frp Sloping Sunshades??Filling The Gaps At Wall Junction With Silicon Of Approved Make To Get Water Tight & Leak Proof Joint Etc. All Complete As Directed By Banks Engineer.

Refer document

Refer document

Refer document