Tender For Supply Of Surgical Consumable To Igims, Patna On Rate Contract Basis -841. Implants - Cervical / lumber / dorsal plating system all types including fixation device, cable system, cages implants and rods (Imported) occipito cervical fixation system imported (USFDA approved) 842. Implants - Cervical / lumber / dorsal plating system all types including fixation device, cable system, cages implants and rods (Indian- Titanium) occipito cervical fixation system 843. Implants - Cranio – maxillofacial implants (should be able to supply plates and screws of various shapes and sizes for cranio – maxillofacial surgery and small bone surgery on demand basis, should have option of supplying high end titanium and low cost stainless steel plates and screws, should be able to supply cutting burrs, diamond burrs and twist drills of various sizes for cranio – maxillofacial and small bone surgery, the implants should have USFDA/ce/ethical clearances from appropriate authorities, should have experience of supplying such implants to other plastic surgery departments of repute in india) 844. Implants - Maxillofacial implant/plating system (indian) all types (1.5/1.7 mm, 2.0mm, 2.5/2.7mm), including instrumentation set compatible with the implant system such as drill bits short and long, universal screw drivers with separate shaft and handle, bending pliers, bending irons cutting pliers, plates and bone holding pliers/forceps, reduction forceps, Orbital retractors right and left, Transbuccal trocar,canula, canula drill guide Threaded drill sleeve short and long, depth gauge and Module for trauma plates and screws & instruments box for instruments. The sets and instruments should have quality certification. 845. Implants - Maxillofacial implant/plating system all types (1.5/1.7 mm, 2.0mm, 2.3/2.4/2.7mm), including instrumentation set compatible with the implant system such as drill bits short and long, universal screw drivers with separate shaft and handle, bending pliers, bending irons for 2.3/2.4/2.7 mm plates, cutting pliers, plate and bone holding pliers/forceps, reduction forceps, Orbital retractors right and left, Transbuccal trocar, canula, canula drill guide threaded drill sleeve short and long, depth gauge and Module for trauma plates (1.5/1.7mm, 2mm, 2.3/2.4/2.7mm) Module for trauma screws 1.5/1.7 mm, 2 mm and reconstruction screws. The sets and instruments should have quality certification (European CE/US-FDA Certified) 846. Implants - Orthopedics Implant /plating system all types including fixation device cable system, cages implants and rods (Imported) Implant system for tibia/femur/R-alna/knee/Hip etc. 847. Implants - Orthopedics Implant /plating system all types including fixation device cable system, cages implants and rods (Indian) Implant system for tibia/femur/R-alna/knee/Hip etc. 848. Implants - Porex polyethylene implants (in form of blocks, sheets and special shapes for mandible, maxilla, cranium and nose, the implants should have USFDA/ce/ethical clearances from appropriate authorities, should have experience of supplying such implants to other plastic surgery departments of repute in india) 849. Incentive Spirometer 850. Incontinence product (female ) 851. Indocyanin green dye (for intraoperative angiography) 852. Infant CPAP nasal prongs,3.0mm nare diameter/2.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 853. Infant cpap nasal prongs,3.5mm nare diameter/2.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 854. Infant cpap nasal prongs,4.5mm nare diameter/4.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 855. Infant cpap nasal prongs,4mm nare diameter/4.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 856. Infant cpap nasal prongs,5.0mm nare diameter/4.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 857. Infant cpap nasal prongs,5.5mm nare diameter/5.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 858. Infant cpap nasal prongs,5.5mm nare diameter/6.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 859. Infant cpap nasal prongs,6.0mm nare diameter/6.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 860. Infant cpap nasal prongs,6.0mm nare diameter/7.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 861. Infant cpap nasal prongs,6.5mm nare diameter/7.0mm septal width with one infant bonnet, one inspiratory and expiratory elbow connector, 2 adapters, with velcro securing tape 862. Infant feeding tube without marking all sizes 863. Infant feeding tubes with markings all sizes 864. Infusion set DEHP & Latex free with inlet anti-bacterial filter, drip chamber with 15 micron filter, calibrated silicone pumping segment & K-neck needle free access 865. Infusion Set Winged 866. Injection cynoacrylate glue 867. Inline nebulisation Circuit 868. Instrument channel cap 869. Instrument covers (disposable sterile 04 mil thickness) – medical grade polyethylenevirgin vinyl degradable and sterilizable for ventilators, monitors, ecg machines, defibrillators, dialysis machines, anaesthesia work stations, etc (all quality, make and sizes should be quoted) 870. Insulin pen needle 31G 871. Insulin pen needles-ultra fine iii pen needles, 4mm (5/32)* 0.23mm (32g) 872. Integuseal, microbial sealant, latex free, Non cytotoxic-50cm x 25cm 873. Internal curved jugular kit 13.5cm adult 874. Internal juglar catheter adult dual lumen 11 f* 15cm 875. Internal juglar catheter dual lumen 11.5 f* 16 cm 876. Internal juglar catheter kit triple lumen 12.5 f * 16 cm 877. Internal Jugular Vein Catheter for permanent access 14.5 fr x 36 cm having symmetrical tip design with heparin coating and antimicrobial silver ion sleeve, Laser cut side slots with vena Trac insertion system 878. Internal Jugular Vein Catheter for permanent access 14.5 fr x 40 cm having symmetrical tip design with heparin coating and antimicrobial silver ion sleeve, Laser cut side slots with vena Trac insertion system 879. Internal Jugular Vein Catheter for permanent access 14.5 fr x 45 cm having symmetrical tip design 880. Internal Jugular Vein Catheter for permanent access 14.5 fr x 45 cm having symmetrical tip design with heparin coating and antimicrobial silver ion sleeve, Laser cut side slots with vena Trac insertion system 881. Internal Jugular Vein Catheter for permanent access 14.5 fr x 50 cm having symmetrical tip design 882. Internal Jugular Vein Catheter for permanent access 14.5 fr x 50 cm having symmetrical tip design with heparin coating and antimicrobial silver ion sleeve, Laser cut side slots with vena Trac insertion system 883. Internal Jugular Vein Catheter for permanent access 14.5 fr x 72 cm having symmetrical tip design 884. Intra abdominal pressure monitoring device 885. Intra aortic balloon catheter 7.5fr. 886. Intra aortic balloon catheter 8fr. 887. Intra aortic balloon catheter 9.5fr. 888. Intra Aortic Balloon Pump (IABP) disposable kit with the provision of free supply of 02 IABP machines for the entire period of rate contract 889. Intra coronary shunt all sizes 890. Introducer needle, 1fr, 18mm length 891. Intubation stylet reusable (malleable aluminium with smooth high density polyethylene outer sleeve) - neonatal, pediatric, small adult, medium adult 892. Invasive blood pressure (IBP) cables ref No. VM 5009F compatible with monitor model BPM-1000 of M/s Bionics Co. Ltd. 893. Iodinate / non iodinated drapes skin barrier [all types + sizes] 894. Irrigation And Suction Tube 5mm Size 5mm, Length 43cm, Suction And Irrigation Tubewith Lateral Holes With 2 Way Stopclock For Single Hand Use 895. Isolation bags/organ preservatives & transplant bags 896. IUI cannula (curved) 897. IUI cannula 12cm, side open or front open with syringe 898. IUI cannula 15cm, side open with syringe 899. IUI cannula 15cm, side open, curved with syringe 900. IUI cannula 17cm, side open, curved with syringe 901. IV administration set vented 88 (photosensitive iv set) vented spike 20 drops-ml with guard/brown colour drip chamber 60mm/fluid filter 15 micron/flow regulator/precision flow controler 5-250ml-hr./latex free ysite/rotating luer lock male adaptor with cap/3.0x4.1mm pvctubing brown colour length 30+140+30mm/sterile/poly paper pack us USFDA approved 902. IV cannnula with port with wing with safety from needle prick 26g 903. IV cannnula with wing without port 26g 904. IV cannnula with wing without port 28g
