Supply Of , Storage Rack For Electronics Lab, Specification: External Size: 355 X320 X563 Mm, Width: 5Mm, Depth: 3.5Mm, Pitch: 10Mm, Pcb Slot 50, Adjustable Width: 35-254 Ref. Position A:34 B@5844@ Side Board Structure 5 Sheets Base Material Metal, Temperature Resistance 100/120/150°C, Equivalent To Model No.- 9805301B1, Preferred Make: Blue Sky/Rohs, Line Filter For Dc Ballast, Part No. U15, Smps Transformer For Dc Ballast, Part No. Etd 39 (25X9x6), Ic/Saloon Hvac/Plc, Part No. Z8s18033vsg Specification: Plcc Type, Preferred Make- Zilog, Hand Gloves For Electronics Lab, Specification: Copper Fibre Gloves, Size: M, Surface Resistance 10^8-10^11 Ohm, Equivalent To Model No.: Bs-Gl-1305, Preferred Make- Blue Sky, Esd Safe Bin For Electronics Lab, Specification: Outside Dimensions In Mm: 220(L) X 130(W) X 125(H), Inside Dimensions In Mm: 200(L) X 115(W) X 115(H), Material-Polypropylene Copolymer, Equivalent To Model No.- Sb3-C, Preferred Make- Alkon/Blue Sky, Wrist Strap Footwear Tester For Electronics Lab, Specification: Range Wrist Strap 0.75 To 10 Meg Ohms, Foot Wear 0.75 To 100 Meg Ohms, Range Selection By Slide Switch, Indications Pass - Green Led, Low & High Fail - Red Led (With Alarm), Test Actuation By Pressing Metal Sensor Plate, Accuracy +/- 10%, Power Supply 9 Volt Battery, Battery Status By Dual Color Led, Dimensions 135 X 70 X 25 Mm, Weight App. 150 Gms With Battery, Equivalent To Model No.- Bs-Wsft-1002, Preferred Make- Blue Sky, Antistatic Charge Meter For Elex Lab, Model No.- Bs-Scn-1104 (Digital) Equivalent To Model No.- Bs-Scn-1104 (Digital), Preferred Make: Blue Sky, Esd Bench Top Fume Absorber For Elex Lab, Specification: Absorption Capability: 1M^3 /Min., Outer Dimensions: 220(W) X 168(D), Weight: 1.5 Kg, Power Consumption Less Than 23 Watt, 220-240V, 50 Hz Input, Absorption Capacity With Filter 1.07 M /Min, Noise Level Less Than 50 Dba, Equivalent To Model No. At- 123Fa, Preferred Make- Advance Tech, Wire Striper 0.81 To 2.59 Mm For Elex Lab, Specification: Cutting Capacity: 30-20 Awg, Wire Diameter: Ø 0.81- Ø 2.59 Mm With Three Functions: Shears, Multi-Diameter Wire Stripper And Plier. Length: 174 Mm, Equivalent To Model No.- Csp30.2, Preferred Make- Piergiacomi, Wonder Mask P For Elex Lab, Specification: Viscosity 28,000-30,000 Cps, Suggested Thickness: 20- 30 Mils, Thinner Di Water, Cure Time 1Hr. Ambient, 30 Min.@ 65°C, 20 Min. @ 82°C, Equivalent To Model No.- 2211-8Sq, Preferred Make- Techspray, Ic For Electronics Lab, Part No. S458xrur0814, Make -Eeti, P Channel Mosfet For Elex Lab, 8 Pin, Part No: Fds4435 Bz, Make: Fairchild, Electrolytic Capacitor For Ac Ballast, Specification: 120Uf, 400V, Preferred Make: Keltron, Philips, Smd Resistor For Electronics Lab, Specification: 33 Ohm, Make- Rohs/Thakral/Rohm, Ic For Electronics Lab, Part No. Js28f640j3d75, Make: Intel, Ic For Electronics Lab, Part No. K4s281632i-Uc75, Make: Samsung, Zener Diode /Rs-3/9/ For Head Light For Elex Lab, Part No.- Kdz3.3V, Specification- Vz 3.1V-3.5V, Iz 5Ma, Preferred Make- Kec/On Semiconductor/Rohm Semiconductor, Smd Transistor For Electronics Lab, Part No. Mmbt3904, Specification: Type Npn, Smd,Ic 200 Madc, Pd 225 Mw, Ta = 25°C Make: Stmicro/Fairchild/Nxp, Led/Rs-3/9/ Dol For Electronics Lab, Part No.- Kpt-1608-Ec071, Specification: Amber Yellow Color, 20Ma, 2.2 Volt Dc, 5Mm, Preferred Make: Kingbright, Mosfet /Head Light For Elex Lab, Part No. K2415, Preferred Make: Nec, Resistance Through Hole For Dc Ballast, 12 Ohm, 2W Preferred Make: Rohs/Thakral/Rohm, Resistance Through Hole For Dc Ballast, 15 Ohm, 2W, Preferred Make: Rohs/Thakral/Rohm, Smd Capacitor(1206) For Dol, 6Nf, Package- 1206 Preferred Make: Rohs/Thakral/Rohm, Smd Capacitor(1206) For Dol, 1.16 Microf, Package- 1206, Preferred Make: Rohs/Thakral/Rohm, Bga Flux/Soldring For Elex Lab, Flash Point: 158 Degree C Insoluble In Water, Auto-Ignition Point- >370 Degree C, Specific Gravity- 1032 G/Ml, Viscosity @ 20 °C - ± 210.000 Cps, Part No.- If-8300 Or Equivalent, Preferred Make: Interflux Electronics
