Requirement Of Fibre Reinforced Plastic ( Frp ) Coating On 4 Nos . Rcc Tanks Including 2 Nos . Agitators With 2 Nos . Control Panels , Repair Of Existing Eoh And Providing 1 No . Control Panel With S/I/T/Of All Water And Pac Pipeleines As Requir, Wazirabad Water Works Timarpur Delhi-Delhi
TDR : 26583220
Tender Notice
BOQ
Expired
Wazirabad Water Works Timarpur Delhi
Delhi
Requirement Of Fibre Reinforced Plastic ( Frp ) Coating On 4 Nos . Rcc Tanks Including 2 Nos . Agitators With 2 Nos . Control Panels , Repair Of Existing Eoh And Providing 1 No . Control Panel With S/I/T/Of All Water And Pac Pipeleines As Requir
Name of Work: Requirement of Fibre Reinforced Plastic(FRP) coating on 4 nos. RCC tanks Including 2 nos. agitators with 2 nos. control Panels, repair Of existing EOH and providing 1 no. control Panel with S/I/T/of all Water and PAC pipeleines as required for feeding alum solution and PAC from overhead tanks to channel at Chandrawal Water Works II
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1.01
Labor charges for scrapping of existing Badly damaged tiles from RCC tanks and Removing them from depth of 3 mtrs And disposing the scrapped material as per Department instructions within 100 mtrs Distance.
item1
260
SQM
2
1.02
Strengthening & repairing of tank walls by filling of pot holes, cavities and cracks with epoxy mortar
item2
260
SQM
3
1.03
Apply one coat of penetration primer for Strengthening of concrete and leave the surface for 6 to 8 hrs
item3
260
SQM
4
1.04
Apply two components of Epoxy Primer With help of brush or roller.
item4
260
SQM
5
1.05
Preparation of walls by applying cement+ Badarpur+ Jamuna sand and leveling the\nSurface to provide absolutely smooth surface\nEliminating any air pockets and preparing it\nFor FRP lining. The cement lining must be\n2” to 3” as required.\n
item5
260
SQM
6
1.06
Supply & applying of 3 mm. thick FRP Lining on the walls of RCC tank surface\nconsisting of following :\nA. Drying of surface to make surface suitable for FRP bonding.\nB. Application of FRP lining material consisting of following:\n1. Application of Primer coat\n2. Application of Fiber Glass and resin.\n3. Application of final coat of Tissue mat for sealing.\nAll together will be 3.0mm thick anticorrosion Barrier.\n\nResin to be used will be ISO Thalic grade Aropol 5334 S Resin Make: Ineo Fibre glass to be used – Owens Corning make as per ASTM 578 & section 4.2.4 e-cr glass reinforcement/IS – 11551.\n
item6
260
SQM
7
1.07
S/o. 63mm PVC pipe of 10 Kg/cm2 Make: Prince/Equivalent
item7
150
METER
8
1.08
Installing of 150 mtrs of PVC pipe &fittings
item8
1
JOB
9
1.09
S/o 2” PP ball valves with flanges, gaskets,SS nuts & bolts and Tail piece etc. Make: Parth/equivalent
item9
15
SETS
10
1.1
S/o fittings for 2” PVC pipe
item10
1
LOT
11
1.11
Supply & fixing Red stone slabs . size 2’x2’
item11
24
NOS
12
1.12
Repairing completely damaged 2MT EOH includingo steel rope, box for loading alum with control Panel and providing where required I beam and structure support etc.
item12
1
SETS
13
1.13
Providing agitators with 3 hp. motor, gear Box, SS agitator with Control Panel and civil structure for installing the agitator system Make: Ghaziabad Polymers
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
