Supply Of Fabrication Of Iron Materials At District Stores, Nalgonda -1 FBR00002 Fabrication of MS Back Clamps with 50x6mm MS flat suitable for 9.1 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 2 FBR00008 Fabrication of LT 3-Phase 4 wire Cross arm with 50x50x6mm or 65x65x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 3 FBR00009 Fabrication of LT 3-Phase 5 Wire Cross arms with M.S. Angle 50x50x6mm Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 4 FBR00004 Fabrication of MS Stay Clamps (Set) with 50x6mm MS flat suitable for 9.1 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 5 FBR00031 Labour charges for fabrication of LT/11KV Top insulator fittings without Clamps with MS Channel 75x40 mm including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 6 FBR30001 Fabrication of 33KV Back clamps with 75 x 8 mm MS Flat including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 7 FBR10010 Fabrication of LT/11KV MS Stay sets without Base Plate, with 16 mm / 20 mm dia MS rods and 75 x 40 mm MS Channel or 65 x 65 x 6mm MS angle including supply of 20 mm nut, cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 8 FBR10001 Fabrication of 11KV V. Cross arms 1.07 mt with 65 x 65x 6 mm MS angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 9 FBR10008 Fabrication of 11KV Top insulator fitting without clamp, with 65x65x6 mm MS angle, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 10 FBR30020 Fabrication of 33 KV Stay Clamps (set) MS flat 75x8 mm for 9.1 Mtrs PSCC poles including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 11 FBR30004 Fabrication of 33KV V. Cross arms 1.53 Mt. without Clamp, with 100x50 mm MS Channel & 75x8 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 12 FBR30007 Fabrication of 33KV Top insulator fitting without clamp, with 100 x 50 mm MS Channel for 9.1M pole including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 13 FBR30009 Fabrication of 33KV MS Stay sets without Base Plate, with 20 mm dia MS rods and 100 x 50 mm MS Channel or 65 x 65 x 6mm MS angle including supply of 20 mm nut, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 14 FBR10029 Fabrication of 11KV Tapping Channel with MS Channel 75x40mm, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 15 FBR10002 Fabrication of 11KV V. Cross arms 1.07 mt with 75 x 40 mm MS Channel including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 16 FBR00005 Fabrication of LT 1 Ph 2 wire Cross arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 17 FBRG0019 Fabrication of Guide Channel for 8.0M/9.1M Poles with MS Channel 75x40mm, including Cutting, Drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 18 FBR00016 Fabrication of LT Back Clamps with 50 x 6 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 19 FBR00033 Fabrication of M.S. Stay Clamps with M.S. Flat 50x6mm, for 8 Mtrs. PSCC poles including Cutting, Drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 20 FBRG0018 Fabrication of 8.0/ 9.1M Pole Guide Clamps with 50x6mm M.S. Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 21 FBR30032 Fabrication of 33KV V. Cross arms without Clamp for 11M poles, with 100x50 mm MS Channel & 75x8 mm MS Flat, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 22 FBR30033 Fabrication of 33KV Top insulator fitting without clamp, with 100 x 50 mm MS Channel for 11M Pole including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 23 FBR30031 Fabrication of MS Back Clamps with 75x8 mm MS flat suitable for 11 PSCC poles, including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 24 FBR30035 fabrication of 33 KV Stay Clamps MS flat 75x8 mm for 11 Mtrs PSCC poles including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 25 FBR30028 Fabrication of 33KV Top insulator fitting With clamp, with 100 x 50 mm MS Channel & 75X8mm Flat for 11M including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 26 FBR00032 Labour charges for fabrication of LT Top insulator fittings without Clamps with MS Angle 50X50X6 mm including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 27 FBR00006 Labour charges for Fabrication of LT 1-Phase 3 wire Cross arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 28 FBR00039 Labour charges for Fabrication of LT 3-Phase 5 wire side arm with 50x50x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 29 Labour charges for Fabrication of HT/LT Top cleats for 9.1M Pole with 65x65x6mm M.S. Angle including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint. 30 FBR30025 Fabrication of 33KV Top insulator fitting With clamp, with 100 x 50 mm MS Channel & 75X8mm Flat for 9.1M including cutting, drilling, bending, finishing etc., complete as per drawing with one coat of red oxide paint.
