Providing Of Solar Power System For Intruder Alarm System Installed Near Indo-Pak Border In Area Of Bop Kailash And Serpura Of 104 Bn Bsf Under Shq Bsf Bikaner Solar Off-Grid 0 . 5 Kw, 104 Bn Bsf Anupgarh-Rajasthan
TDR : 26321415
Tender Notice
Corrigendum Details
BOQ
Expired
104 Bn Bsf Anupgarh
Rajasthan
Corrigendum : Providing Of Solar Power System For Intruder Alarm System Installed Near Indo-Pak Border In Area Of Bop Kailash And Serpura Of 104 Bn Bsf Under Shq Bsf Bikaner Solar Off-Grid 0 . 5 Kw
Name of Work: < Providing of Solar power system for intruder alarm system installed near Indo-Pak Border in area of BOP Kailash and Serpura of 104 Bn BSF under SHQ BSF Bikaner>
Item Description
Item Code / Make
Quantity
Units
1
Supply, Installation, Testing and Commissioning off-grid Solar Photovoltaic Power Plant consisting of Mono/Poly Crystalline silicon solar cells, necessary protections, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-\na) The total solar PV array capacity should not be less than 660 Wp.\n(Luminous / Havells/ Su-kam / Microtek /WAAREE / TATA / CEL / Moserbear ) b) SOLAR off-grid Power Conditioning Unit cum Invertor with minimum continuous Output Rating 0.5 KW, should have inbuilt solar charge controller and Protection against deep discharge, overcharge and short-circuit.\nThe PCU will have following features: \nNominal DC Array Input Voltage = 12 V DC,\nAcceptable input Voltage Range AC = 110-290 V A, \nOutput Voltage 230 V, 50Hz,.\n(Luminous NXG+ 1100 or similar in Havells/ Su-kam / Microtek /WAAREE / TATA ) c) Fixing of Mc4 Connector with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.\nd) Connections & Interconnections by supplying & fixing following sizes ISI marked PVC insulated copper conductor single core cable 1.1 kV, Conforming to IS 694 grade. \ne) Module interconnections and module parallel connections with the 4 sq mm cable.\nII) Array / AJB to PCU 2 x 6 sq mm copper cable in PVC conduit.\nIII) Battery to PCU = minimum 16 mm copper cable. \niV) PCU to load / change over switch 3 x 4 sq mm copper cable. ( 6 Mtr only) f) Battery: one 12 Volt, 150AH, @ C10 Tubular Low Maintenance Lead Acid Solar Battery with 5 Years replacement warranty. \n(Luminous / Havells/ Su-kam / Microtek / TATA / HBL / OKAYA ) \nIncluding Complete design, construction of array support \nstructure, civil work (limited to fixing of PV structure)\nThe systems should be installed with a 1:2:4 cement concrete block of 60 cm X30 cm X30 Cm with each support.\nWarranty : 2 years for complete system, 2 years for PCU cum Inverter, 10 years product warranty on PV modules , 25 years Performance Warranty on PV modules. 5 Years on Battery.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
