| 1 | 1 | S&F Octagonal hot galvanised street light pole 9 mtrs long, not less than 3 mm thick , hot dip galvanized average coating thickness of minimum 70 micron conforming BSEN 10025 and ISO 14001, Poles shall be in single section and have octagonal cross section and continuously tapered with single longitudinal welding and octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness (as per IS 2062) with provision for fixing 4 foundation bolts (size of bolt M24 x 750) with nut, bolt and washer assembled with base plate( thickness not less than 8 mm) two locations i.e. from inside and outside of foundation etc complete all as specified and directed.\nNote:- (i) 02 Nos of foundation plate, 04 Nos Foundation bolt & labour for embedded of bolt & plate in fdn concrete area etc included in this unit rate.\n(ii) Contractor shall submit necessary fdn design & str design with drawing of Octagonal pole to Engineer-in-Charge for approval before execution of work. | | 6 | Each |
|---|
| 2 | 2 | S&F 200 W LED Floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP 66 rating complete all as specified and directed. Make- Havells-JETA PRO PLUS or C&S ORION Model No LTEF 200WHPLED BAYLIGHT or similar in make as mentioned in PS. | | 18 | Each |
|---|
| 3 | 3 | Supply, laying and testing of cable XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 10.0 sqmm X 4 core etc complete all as specified and directed. | | 250 | RM |
|---|
| 4 | 4 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing test point all as specified and directed by Engineer-in-Charge including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20 mm dia GI light grade pipe for earth lead protection, 20mm dia GI light grade pipe for watering , water funnel, testing point etc and testing on completion complete all as specified and directed. | | 6 | Each Set |
|---|
| 5 | 5 | S & F PVC pole mounted loop in loop out box 230 x 170 x 105 mm made of impact assistance plastic and heat resistance material including 03 No, 06A, SP, MCB 'C' series mounted on insulators and all cable fixed with suitable lugs and suitable Cable Glands complete all as specified and directed. \nNote : (a) Materials like MS clamps, nuts, bolts & washers for fixing are measured & paid separately under respective item as \"Supply only\". \n(b) Labour for fixing of MS clamps, nuts & bolts shall deemed to be included in unit rates. \n(c) Unit rate shall be included that connection between existing incoming LT cable lines to new junction box .\nMake for loop in loop out box : Sintex, Hensel or similar in makes as mentioned in PS. Make for MCB : L&T/C&S/Havells or similar in makes as mentioned in PS. | | 6 | Each |
|---|
| 6 | 6 | S&F double compression copper/Stainless steel gland for fixing armoured cable in panel of 4 core 6 sqmm complete all as specified and directed. | | 10 | Each |
|---|
| 7 | 7 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16.0 sqmm X 4 core etc complete all as specified and directed. | | 100 | RM |
|---|
| 8 | 8 | Supply, Install test and commission weather proof, out door type High mast light control panel feeder box fabricated with 3.15 mm thick CRCA factory made powder coating weather proof sheet with top cannopy and protect from high saline climate weather front operated, cubical type, 3 phase ,4 wire AC 415 V with necessary angle iron frame and MS channel for bottom base and separate compartment for TPN / electrical accessories and front and rear opening door (double door type) with locking arrangement with nessessary Hinges, prewired with adequate size of cables and with & including and incoming and outgoing cable connections with cable glands, lungs etc with and including 600 mm long, 2 Nos brick platform of one brick thick wall in cement mortar 1:4 of 500 mm high from GL with 300mm deep foundation (of 35mm thick wall) over 100 mm thick Plain cement concrete 1:3:6 type C-1 alongwith 15mm thick rendering with cement mortar 1:4 with 3 coat of white wash etc complete all as specified and directed with including the follwings :-\n(a) Timer 0-24 hours with 75 hrs battery backup.\n(b) Contactor 32 amps-01 No\n(c) Incoming MCB TPN 32amps -01 No\n(d) Outgoing MCB TPN 20 amps -02 Nos\n(e) RYB indication -6 Nos \n(f) Terminals for IC and OC MCB's with undrilled gland plate. | | 1 | Each |
|---|
| 9 | 9 | S&F 3 core PVC insulated unsheathed multi stranded copper conductor cable of size 2.5 Sqmm drawn through GI/PVC pipe complete all as specified and directed. | | 180 | RM |
|---|
| 10 | 10 | M&L providing plain cement concrete 1:4:8 type D-2 with 40mm graded stone aggregates for foundation of poles complete all as specified and directed. | | 0.3 | Cum |
|---|
| 11 | 11 | M&L providing cement concrete 1:2:4 type B-1 with 20mm graded stone aggregates for foundation bed of poles complete all as specified and directed. | | 2 | Cum |
|---|
| 12 | 12 | Excavation in trenches n.exc 1.5m wide and n.exc and 1.5 mtr in depth getting out in soft/loose soil complete all as specified and directed. | | 84 | Cum |
|---|
| 13 | 13 | Removing excavated material to a distance not exc. 50 mtrs and deposting where directed at a level not exceeding 1.50mm above the starting point complete all as specified and directed. | | 28 | Cum |
|---|
| 14 | 14 | Returning and filling in, including spreading, leveling, watering and well ramming in layer n.exc 25 cm thick in soft/loose soil complete all as specified and directed. | | 52 | Cum |
|---|
| 15 | 15 | Supply and filling clean, dirtless, washed, free from vegetation, natural river sand as cushioning of cables, including spreading and punning down all as per clause No 3.21 of SSR part -I complete all as specified and directed.\nNote : Punned thickness shall only be measured for payment purpose. | | 24 | Cum |
|---|
| 16 | 16 | M&L sub class 'B' brick for protection of UG cable in trenches of old size brick complete all as specified and directed. | | 2.6 | PER 1000 NOS |
|---|
| 17 | 17 | M&L Road/PCC/Drain cutting for laying LT UG cable/GI pipe and making good to the disturbed surface with providing plain cement concrete of 1:3:6 type C1 by using 20mm graded stone aggregate to match with adjoining surface complete all as specified and directed. | | 20 | RM |
|---|
| 18 | 18 | M&L GI pipe light grade ISI marked laid in trenches, fixed to poles, laid through wall across road etc for protection of cable of size 50mm dia including taking down GI pipe complete all as specified and directed. | | 20 | RM |
|---|
| 19 | 19 | Supply only MS supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed. | | 1 | Qtl |
|---|
