Supply Of Cutter Bar, Carbide Bit Cutting Chain Assembly Set, Connecting Elbow, Dredger Drum Gear, Bearing Mounting For Screen Unit , Pin For Decending Trough, Special Cap Washer, Callots, Oil Reservoir, Pressure Disc-Uttar Pradesh

Supply Of , Cutter Bar (Gross Piece 2150) For Bcm Machine Plasser Part No. Rm.08.25.2150.01. As Per Sample And Specification No. Tm/Hm/6/142. [Acceptable Make: Plasser Or Equivalent], Carbide Bit Cutting Chain Assembly Set For Bcm Machine. Plasser Part No. 64.08.2000.33/84 Gl-C. As Per Specification No. Tm/Hm/6/111. (One Set Consisting Of Following Nine Items) 1.Scrapper Shovel Plasser Part No. 64.08.2038 = 86 Nos. 2.Intermediate Link Plasser Part No. 61.04.211 = 86 Nos. 3.Round Shaft Chisel Plasser Part No. 64.08.2034 = 430 Nos. 4.Chain Bolt Plasser Part No. 61.04.212 = 172 Nos. 5.Bush Plasser Part No. 64.08.2035 = 430 Nos. 6.Fixing Pin Plasser Part No. M8x40din1481= 430 Nos. 7.T Bolt Plasser Part No. 61.04.218 = 172 Nos. 8.Nut Plasser Part No. M10din934.8 = 344 Nos. 9.Washer Plasser Part No. B10din127 = 172 Nos. [Acceptable Make: Plasser Or Equivalent ], Connecting Elbow Rhs For Bcm Machine. Plasser Part No. 64.08.1997. As Per Specification No. Tm/Hm/1/Fb-004. [Acceptable Make: Plasser Or Equivalent ], Connecting Elbow Lhs For Bcm Machine Plasser Part No. 64.08.1996. As Per Specification No. Tm/Hm/1/Fb-004. [Acceptable Make: Plasser Or Equivalent ], Dredger Drum Gear Out Of En-24 Material Of Hardness 400 Bhn For Bcm Machine Plasser Part No. 61-04-519, As Per Specification No. Tm/Hm/1/Fb-005, [Acceptable Make: Plasser Or Equivalent ], Bearing Mounting For Screen Unit Plasser Part No. 5118002-17Mn-70 As Per Specification No. Tm/Cpoh/Bcm/A3. [Acceptable Make: Plasser Or Equivalent ], Pin For Decending Trough For Bcm Machine Plasser Part No. 62.08.603, As Per Specification No. Tm/Cpoh/Bcm/A2. [Acceptable Make: Plasser Or Equivalent ], Special Cap Washer Out Of En-8 Material For Bcm Machine Plasser Part No. 64-09-1384 As Per Specification No. Tm/Hm/1/Fb-017, [Acceptable Make: Plasser Or Equivalent ], Callots Plasser Part No. 64.09.1213 As Per Specification No. Tm/Hm/Bcm/A4. [Acceptable Make: Plasser Or Equivalent ], Corner Roller Assembly Without Bearing For Bcm Machine. Plasser Part No. 64.08.5000.21. As Per Specification No. Tm/Hm/1/Fb-013 [Acceptable Make: Plasser Or Equivalent], Oil Reservoir With Mounting Plate, Gauge And Aluminium Cap Jaali Plasser Part No. W37.2329-1Li/Re. Detail Given In Annexure A Attached.As Per Drawing No. Tm/Hm/6/Cpoh/Or And Specification No. Tm/Hm/6/Cpoh. [Acceptable Make: Plasser Or Equivalent ], Pressure Disc For Tamping Unit Out Of En-24 Material Plasser Part No. 2E- 34- 211 As Per Rdso Drawing No. Tm/0131/Rev-3 & Specification No. Tm/Hm/6/110/Rev-2 [Acceptable Make: Plasser Or Equivalent]

Refer document

Refer document

Refer document