Supply Of Fume Hood And Lab Accessories In The Metallurgical And Materials Engineering -, Kharagpur-West Bengal

Supply Of Fume Hood And Lab Accessories In The Metallurgical And Materials Engineering -1. Fume Hood with Digital Anemometer By TEL Dimension: 1800*900*2250mm, Table Top: Granite, Base Cabinet: 2, Design Structure: Aerodynamic, Floor mounted, Airflow type: Auto by pass type (for non AC labs), Exterior Construction: 1.2 & 1.5 mm heavy duty electro galvanized CRCA (as per IS: 513) sheets with epoxy powder coating and rigid structure., Interior Construction: Chemical and Heat resistant, Fire retardant, Smooth finish, Easily Cleanable Panels made out of durable material integral work walls, 6 mm thick, Front Top Panel: Easily open able hinged top panel for easy access to Flow control Valve and electrical lighting fixtures for maintenance., Airfoil: Aerodynamic design. Horizontal airfoil mounted on the worktop made of 1.6mm thick CRCA sheet., Worktop: Chemical resistant slash and spillage proof dished Jet black granite worktop (18 to 20 mm thick)., Sash (Shutter): Vertical rising counter‐balanced sash. Toughened Float Glass sash for full work area visibility (5 mm thick). Smooth and light sash operation. Clear operable height (750 mm)., Lighting: Fluorescent light (20 watt, 1 nos.) with vapour proof housing and fitting for proper illumination., Electrical Utilities: 3 Nos. of 5/15 amp electrical points shall be provided on the right side of the fume hood with tube light switch. Push button starter and electrical connector shall be fixed on the top of the fume hood with all internal connections., Working Surface`& Drip Cup: 19mm thick super black granite will be provided for the table top of fume hood also PP Small drip cup for the draining of water from the fume hoods., Utility Services: Remote operated services fitting will be provided inside the fume hood with 1 Water, 4 Nos. for Gas., CENTRIFUGAL BLOWER: 1000 CFM Type : Direct Drive Static Pressure : 2” WC RPM : 1440 Impellor : FRP backward curved blades with resin Casing: PP / FRP with FRP stuffing box Shaft: EN ‐ 8 Dia 50mm with FRP lined Stand : 40 x 6 mm MS angular with epoxy coated Motor :1HP, 3 phase, 1440 RPM (Any reputed ISI Make). 2. Emergency Shower and eye wash station. 3. Glass Shutter over head cabinet Made of epoxy powder coated 18 gauge sheet, Dimension‐600 mm W x 400 mm D x 600 mm H. 4. Modular Wall Facing Workbench with 3 base cabinet(1 Drawer 2 Shutter 3 nos ) with table length Double tier Reagent Rack & electrical switches and sockets,1 LED light would be there under each Reagent Rack. Switches Make‐ (North‐West) Table top:18 +/‐ 1 mm thick well‐polished Jet Black Granite with half round nosing, acidresistant, alkali‐resistant. Material of Construction for Work Bench: C Frame assembly from standard hollow section conforming to IS 7138/60 mm X 30 mm x 1.6 mm thick with crc sheet of 16 gauge. Interior & Exterior will be provided with powder‐coated finish (60‐70 microns) which provides both protective and decorative finishes to the structure. Under Bench Cupboards will be provided with Top Drawer and Bottom one Shutter with one Horizontal Partition. All necessary hardware fitting like PP Handle, Heavy Duty Drawer Channels for smooth rolling.Make ‐ Godrej Table Dimension‐3900mm W*750 mm D*900 mm H Storage Dimension‐600 mm W* 520 mm D* 900 mm H

Refer document

INR 3000.0 /-

Refer document