Setting Up Of Materials Characterization Laboratory (Mcl) In The Basement Of Faculty Block E. 2 1 Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. 2 Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. 3 Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering,shuttering and finishing : a)All works upto plinth level 4 Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in superstructure uptofloor five level. b)230 x 110 x 80 mm 5 Half brick masonry using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/cm2 b) Above plinth upto floor V level 200 x 95 x 95 6 Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) C) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level 7 Centering & shuttering including Strutting, Propping & removal of forms for : (iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth 8 Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structuralmember. 9 12mm cement plaster 1:4 (1 cement : 4 coarse sand) 10 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) 11 Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. c)First class matti wood 12 Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominalsize. b)40 x 3 mm flat iron hold fast, 15 cm long 13 Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including four nos. S.S railway hinges of 5 with necessary screws: b)Second class Indian teak wood 14 Providing and fixing anodised aluminium sliding door bolt anodised transparent or dyed required colour and shade with bolts, nuts and screws etc.complete: b)250 x 16 mm 15 Providing and fixing anodised aluminium flat latch b)200 mm 16 Providing and fixing aluminium tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. complete. c) 200 x 10 mm 17 Providing and fixing aluminium handle anodised or dyed to required colour or shade with screws etc. complete. a)125 mm 18 Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. 19 Providing and fixing M.S. grill of requiredpattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. a) Plain grill 20 Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (Thepayment will be made on plinth of the building. b) Post construction 21 Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurrycomplete. 22 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M30 grade made by heavy duty block making machine with strong vibratory compaction using 3 ton roller and of approved size and design/shape laid in 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-Charge. 23 Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing inwhite cement mixed with pigment of matching shade complete. c) Wall Ceramic Glazed Tiles : 300 x 600 24 Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixedpartitions a)Acrylic sheet 25 Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section 26 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) includingcutting chases and making good the walls etc. b)20 mm dia nominal outer dia pipes. c) 25 mm dia nominal outer dia pipes. 27 Making connection of G. I. Distribution branch with G. I. Main 50 mm to 80 mm nominal bore by providing and fixing tee including treading the pipe etc. complete 28 Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : a)20 mm nominal bore b) 25 mm nominal bore 29 Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore 30 Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110 mm dia 31 Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a)110 mm dia b)75 mm dia 32 Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : b)150 x 100 mm size –P or S type 33 Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a)100 mm dia b) 75 mm dia 34 Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. 35 Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. 36 Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37 Removing dry or oil bound distemper byscrapping sand papering and preparing thesurface smooth including necessary repairs toscratches etc. complete. 38 Applying one coat of cement primer of approved brand and manufacture on wall surface. 39 Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. 40 Providing and fixing 1 mm thick M.S. sheetgarage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint. a) Using M.S. angles 40 mm x 40 mm x 6 mm for diagonal braces. 41 Applying priming coat with ready mixed primer of approved brand and manufacture on steel work 42 Painting two or more coats( excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. 43 Painting three or more coats with acrylic exterior paint of approved brand and manufacture ( such as weather shield, Apex) including applying one coat of cement primer and one coat of surface treatment etc. complete
