| 1 | 1 | Rewinding Elect. Motor, Ceiling Fan and Other Electrical Appliances | 1 | | |
|---|
| 2 | 2 | Rewinding the motor of table / pedestal / wall bracket / cabin fans of all type and makes including minor repairs replacing ball bearings, bush bearing, condenser, screws etc. & testing for original speed. | 2 | 1 | Per No. |
|---|
| 3 | 3 | Rewinding the motor of the ceiling fan 900 mm of all types and makes and over hauling including minor repairs. | 3 | 1 | Per No. |
|---|
| 4 | 4 | Rewinding the motor of the ceiling fan 1200 mm / 1400 mm of all types and makes and over hauling including minor repairs. | 4 | 1 | Per No. |
|---|
| 5 | 5 | Rewinding the motor of the exhaust fan 900 / 1400 RPM 300 mm of all types and makes and over hauling including minor repairs. | 5 | 1 | Per No. |
|---|
| 6 | 6 | Rewinding the motor of the exhaust fan 900 / 1400 RPM 375 mm of all types and makes and over hauling including minor repairs. | 6 | 1 | Per No. |
|---|
| 7 | 7 | Rewinding the motor of the exhaust fan 900 / 1400 RPM 450 mm of all types and makes and over hauling including minor repairs. | 7 | 1 | Per No. |
|---|
| 8 | 8 | Rewinding the electric motor upto 1 H.P. single phase upto 1400 RPM of all types and makes with copper wire, over hauling with minor repairs. | 8 | 1 | Per No. |
|---|
| 9 | 9 | Rewinding the electric motor upto 1 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 9 | 1 | Per No. |
|---|
| 10 | 10 | Rewinding the electric motor upto 2 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 10 | 1 | Per No. |
|---|
| 11 | 11 | Rewinding the electric motor upto 3 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 11 | 1 | Per No. |
|---|
| 12 | 12 | Rewinding the electric motor upto 5 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 12 | 1 | Per No. |
|---|
| 13 | 13 | Rewinding the electric motor upto 7.5 H.P. three phase upto 1400 RPM& 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 13 | 1 | Per No. |
|---|
| 14 | 14 | Rewinding the electric motor upto 10 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 14 | 1 | Per No. |
|---|
| 15 | 15 | Rewinding the electric motor upto 15 H.P. three phase upto 1400 RPM& 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 15 | 1 | Per No. |
|---|
| 16 | 16 | Rewinding the electric motor upto 20 H.P. three phase upto 1400 RPM & 2900 RPM of all types and makes with copper wire, over hauling with minor repairs. | 16 | 1 | Per No. |
|---|
| 17 | 17 | Rewinding of submersible pump motor of all types and makes upto 3 HP and with coated copper wires & over hauling with minor repairs. | 17 | 1 | Per No. |
|---|
| 18 | 18 | Rewinding of submersible pump motor of all types and makes 5 HP with coated copper wires & over hauling with minor repairs. | 18 | 1 | Per No. |
|---|
| 19 | 19 | Rewinding of submersible pump motor of all types and makes 7.5 HP with coated copper wires & over hauling with minor repairs. | 19 | 1 | Per No. |
|---|
| 20 | 20 | Dismantling the existing submersible pump / ejecto pump with GI pipe line & accessories. | 20 | 1 | Per No. |
|---|
| 21 | 21 | Re-fitting of repaired submersible pump / eject pump with GI pipe line & all accessories. | 21 | 1 | Per No. |
|---|
| 22 | 22 | Replacing the existing bearing of approved make for electric motor A.C single phase / 3 phase upto 1 H.P. of all types with due alignment of the shaft and tested. | 22 | 1 | Per No. |
|---|
| 23 | 23 | Replacing the existing of approved make for A.C electric motor 3 phase 2 H.P. to 3 H.P. of all types with due alignment of the shaft and tested. | 23 | 1 | Per No. |
|---|
| 24 | 24 | Replacing the existing bearing of approved make for electric motor 5 H.P. & 5.7 H.P. of all types with due alignment of the shaft and tested. | 24 | 1 | Per No. |
|---|
| 25 | 25 | Replacing the existing bearing of approved make for electric motor 10 H.P. & 12.5 H.P. of all types with due alignment of the shaft and tested. | 25 | 1 | Per No. |
|---|
| 26 | 26 | Replacing the existing bearing of approved make for electric motor 15 H.P. to 20 H.P. of all types with due alignment of the shaft and tested. | 26 | 1 | Per No. |
|---|
| 27 | 27 | Replacing the existing ball bearing of table/cabin/pedestal/ ceiling/ exhaust fan complete with alignment of shaft and tested. | 27 | 1 | Per No. |
|---|
| 28 | 28 | Replacing the existing Bush/rubber, ring, washers of table/cabin/pedestal/ ceiling/ exhaust fan complete with alignment of shaft and tested. | 28 | 1 | Per No. |
|---|
| 29 | 29 | Replacing the existing capacitor of 2.5 microfarad for all types of fan complete with wiring. | 29 | 1 | Per No. |
|---|
| 30 | 30 | Replacing the existing capacitor of 4 microfarad for all types of fittings complete with wiring. | 30 | 1 | Per No. |
|---|
| 31 | 31 | Total rotor shifting machinery & bush fitting | 31 | 1 | Per No. |
|---|
| 32 | 32 | Thirds bearing set | 32 | 1 | Per No. |
|---|
| 33 | 33 | Gun metal bush set 0.5 H.P. to 2 H.P. with gland & pump paking for openwell & suberssible | 33 | 1 | Per No. |
|---|
| 34 | 34 | Gun metal bush set 3 H.P. to 7.5 H.P. with gland & pump paking for openwell & suberssible | 34 | 1 | Per No. |
|---|
| 35 | 35 | Replacement of bearing for all types of exaust fan (Single Phase & Three Phase) | 35 | 1 | Per No. |
|---|
| 36 | 36 | Replacement of bearing for both ND&DE for openwell suberssible & suberssible upto 2 HP (Single Phase & Three Phase) | 36 | 1 | Per No. |
|---|
| 37 | 37 | Replacement of bearing for both ND&DE for openwell suberssible & suberssible upto 3 HP to 5 HP | 37 | 1 | Per No. |
|---|
| 38 | 38 | Replacement of bearing for both ND&DE for openwell suberssible & suberssible upto 7.5 HP to 10 HP | 38 | 1 | Per No. |
|---|
| 39 | 39 | Rewinding of Openwell submersible pump motor of all types and makes upto 2 HP and with coated copper wires & over hauling with minor repairs. (Single Phase & Three Phase) | 39 | 1 | Per No. |
|---|
| 40 | 40 | Rewinding of Openwell submersible pump motor of all types and makes 3 HP to 5 HP and with coated copper wires & over hauling with minor repairs. (Single Phase & Three Phase) | 40 | 1 | Per No. |
|---|
| 41 | 41 | Rewinding of Openwell submersible pump motor of all types and makes 7.5 HP to 10 HP and with coated copper wires & over hauling with minor repairs. (Single Phase & Three Phase) | 41 | 1 | Per No. |
|---|
| 42 | 42 | Workshop Machinery Work for Openwell submersible & Submersible pump upto 2 HP | 42 | 1 | Per No. |
|---|
| 43 | 43 | Workshop Machinery Work for Openwell submersible & Submersible pump 3 HP to 5 HP | 43 | 1 | Per No. |
|---|
| 44 | 44 | Workshop Machinery Work for Openwell submersible & Submersible pump 7.5 HP to 10 HP | 44 | 1 | Per No. |
|---|
| 45 | 45 | Replacement of Impeller for Openwell submersible & Submersible pump upto 2 HP | 45 | 1 | Per No. |
|---|
| 46 | 46 | Replacement of Impeller for Openwell submersible & Submersible pump 3 HP to 5 HP | 46 | 1 | Per No. |
|---|
| 47 | 47 | Replacement of Impeller for Openwell submersible & Submersible pump 7.5 HP to 10 HP | 47 | 1 | Per No. |
|---|
| 48 | 48 | Replacement of Impeller for Borewell submersible & Submersible pump upto 2 HP | 48 | 1 | Per No. |
|---|
| 49 | 49 | Replacement of Impeller for Borewell submersible & Submersible pump 3 HP to 5 HP | 49 | 1 | Per No. |
|---|
| 50 | 50 | Replacement of Impeller for Borewell submersible & Submersible pump 7.5 HP to 10 HP | 50 | 1 | Per No. |
|---|
