, saharanpur-Uttar Pradesh

(Safe cartage of 8.5 Mtr long PCC/ST poles from ESC, SRE, to site of work including loading & unloading at both ends.(Distance upto 60 Km.))(Safe cartage of complete line material (Except PCC/ST poles) from ESC, SRE, to site of work including loading & unloading at both ends.(Distance upto 60 Km.))(Erection grouting single support on PCC poles with complete fitting of all accessories of 11 KV/LT line)(Erection grouting single support on ST poles with complete fitting of all accessories of 11 KV line)(Fabrication and erection of double pole on 8.5 Mtr. long PCC Poles with complete fitting e.g channel bracings etc. including fitting of Disc/Pin insulators duly grouted withcement concreting in block of 450x450x1500mm.in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5. with plinth)(Grouting of stay rods by digging of pits in block of 600X600X300mm.concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire)(Providing of X-arm holding clamps PCC /ST poles with nuts bolts made of new MS flat iron 50x6 mm)(Earthing of poles with earthing rod)(Laying, lifting, Stringing, sagging jumpering & binding of conductor for 11KV Line as per RESPO specification. A) ACSR weasel conductor B) ACSR Rabbit conductor)(Safe cartage of 63/100 KVA T/F from ESC, SRE, to the site of work including loading & unloading at both ends)(Safe installation of 63/100 KVA T/F on the double pole with complete fittings including making connections)(Laying and making connections of LT PVC cable 3.5x240sq.mm./1x240sqmm. from T/F to double pole (approx to 20 Mtr))(Tightening of loose stay including opening, binding and nozzling of stay wire)(Re-sagging of loose conductor of 11 KV lines (consisting of 3 Phase) with opening, binding & rejumpering)(Removal of damaged & heated Weasel conductor & Rusted G.I. Wire from 11 KV with making of bundle & cartage from site to ESC, SRE/J.E. store loading & unloading)(Laying, lifting, Stringing, sagging jump ring & binding of ACSR Weasel/Rabbit conductor for 11KV Line)(Replacement of broken/ Damaged Disc/Pin insulator including resagging and rebinding of conductor)(Straightening of tilted PCC pole/ R.S. joists of 11 KV lines with opening, binding and jumpering of conductor)(Dismantling of existing PCC pole erected wrong place with opening of complete accessories and shifting the same)(Dismantling of Dubble Pole on PCC pole wrong place with opening of complete accessories)(Re-erection of dismantle PCC pole at new site with complete fitting of LT line mains)(Fixing of 11 KV TPMO set and fuse set on the new and old D/P)(Fixing of HT Round Pole clamps/Stay clamps/cross arm clamps/ on PCC poles)(Fixing of stay insulator in stay wire of existing stays and making stay intact)(Guarding of lines on crossing of 11 KV lines, telephone lines, road crossing, with G.I wire 6SWG/8SWG)(Replacement of broken PCC poles/ Erection of PCC pole between long span of 11 KV /LT line with complete fitting)(Replacement of damaged wooden cross arm by V type angle cross arm with opening and rebinding of conductor and other accessories)(Preparation of map of the Village/ Majra showing the details of final status of new and augmentation work carried out for saturation of electrification of the Village)(Providing, making and fixing of Bracket on PCC /ST poles with nuts bolts made of new MS angle size 65x65x6 mm with nuts & bolts as per Site situation)(Off shooting of tree branches touching the 11 KV line)(Laying, lifting, Stringing, proper sagging ABC cable of size 3x95+1x70+1x16 sq.mm. including fixing of all type clamps and connector providing all accessories)(Fixing of junction box of single phase/3 phase on PCC pole/ ST poles with providingsuitable clamp and connection of above junction boxes with ABC cable connecting jumpers including opening and binding of service connection).

INR 230 /-

INR 5000.0 /-

Refer document