Supply Of , Set Of Seat And Berth Including Attendant Berth And Without Magazine Bag For Lwfac. Upholstry Colour Shade Ppa77 (Stain Proof) Of M/S Jaya Shree Textile, (Ref. Md22151 Dt. 08/02/2013),Chair Angles P/Coated Shade Ral-9006 & Finish- High Gloss Above 50 At 45? (Ref. Md22151 Dt. 08/02/2013),Upholstery To Rdso/Spec.2008/Cg07(Ref.Md46221 01/02/11) With Amendmentslip No. 4.Cushioning Material Is Silicon Foam As Per Rdso Spec. #Rsdo/2013/Cg-13., As Per Drawing: La61002 Alt F (Without Item No 7) And La64174 Alt A (Attendant Berth), Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Seat And Berth Set Without Magazine Bag For Lwaccw Coach.Upholstry To Rdso/2008/Cg-07 Rev-Nil(Ref Md35131 Dt.26.03.09)With Amendment Slip No.-4 And Colour Shade Alnac-03(Ref Md22151 Dt.08.02.13),Cushioning Material Is Silicon Foam As Per Rdso Spec.#Rdso/2013/Cg-13., As Per Drawing: Lw61004 Alt M Without Item No.9, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Set Of Seats For Lhb Gs Coaches (Antyodaya), Upholstery To Rdso Spec. # Rdso/2008/Cg-07 Rev-Nil With Amendment Slip No-4, Shade Alnac-03(Ref. Md22151 Dt. 08/02/2013) Painting As Per Mdts140. Relevant Notes Of Drg.No.Lg61001 Alt A Are Applicable.Colour Shade For Seat Frame Satin Blue To Isc-177 As Per Md46271 Dt. 20.02.18, Cushioning Material Is Silicon Foam As Per Rdso Spec. #Rsdo/2013/Cg-13., As Per Drawing: Mplsisblws Version 0, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Set Of Seat And Berth Without Magazine Bag For Ac 2-Tier Area For Lfcwac Coaches .Upholstery To Rdso/2008/Cg-07 Rev-Nil (Ref. Md35131 26.03.09) With Amendment Slip No-4. Upholstery Colour Shade Alnac-03(Ref. Md22151 Dt. 08/02/2013), Chair Angles Powder/C Shade Ral-9006 & Finish-High Gloss Above 50 At 45? (Ref. Md22151 Dt. 08/02/2013), Cushioning Mat. Is Silicon Foam As Per Rdso Spec. #Rdso/2013/Cg-13., As Per Drawing: Mplsisbl2t Version 0, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Seats Of Guard Room For Lhb Power Car Eog Coaches, Upholstery To Rdso Spec. # Rdso/2008/Cg-07 Rev-Nil With Amendment Slip No-4, Shade Alnac-03(Ref. Md22151 Dt. 08/02/2013),Fibreglass Woven Cloth Fire Barrier Not Required (Ref Md 22201/03.01.07),Cushioning Material Is Silicon Foam As Per Rdso Spec. #Rsdo/2013/Cg-13., As Per Drawing: Lp64150 Without Item No. 3 To 6, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Seat And Berth Set For Lwaccn Coach.Upholstry To Rdso Spec.#Rdso/2008/Cg-07 Rev-Nil(Ref Md35131 Dt.26.03.09)With Amendment Slip No.4 And Colour Shade Alnac-03(Ref Md22151 Dt.08.02.13)., As Per Drawing: Mi007106, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Set Of Seat & Berth W/O Magazine Bag For Fac Area For Lfcwac Coaches.Upholstry To Rdso/2008/Cg-07 (Ref.Md46221 Dt.01/02/11) With Amendment Slip No- 4. Cushioning Material Is Silicon Foam As Per Rdso Spec. #Rsdo/2013/Cg-13. Upholstry To Colour Shade Ppa77 (Stain Proof) Of M/S Jaya Shree Textile, (Ref. Md22151 Dt. 08/02/2013)., As Per Drawing: Mplsisblfac Version 0, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Set Of Seat And Berth For Lwcbac, Upholstery To Rdso Spec. # Rdso/2008/Cg-07 Rev-Nil With Amendment Slip No-4, Shade Alnac-03(Ref. Md22151 Dt. 08/02/2013),Cushioning Material Is Silicon Foam As Per Rdso Spec. #Rsdo/2013/Cg-13., As Per Drawing: Mplsisblwcbac Version 0, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc., Set Of Seats And Berths For Lhb Scn Eog Coaches,Upholstery To Rdso Spec. # Rdso/2008/Cg-07 Rev. Nil With Amendment Slip No-4 , Shade Al Nac-03 (Ref. Md22151 Dt. 08/02/2013),Colour Shade For Seat Frame Satin Blue To Isc:177 Md22151 Dt 08/02/2013., As Per Drawing: Mplsisblwscn Version 2, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc.
