Hand Push Thermoplastic Road Marking Machine:-\nTechnical Specifications:\n\n(a) Paint Barrel Capacity : 100 KG TRM Paint\n(b) Glass Beads Dispenser : 200mm wide GB Dispenser not less than 10 Kg/13L\n(c) Dies : 50/80/100/120/150/180/230/250/300/400/450MM\n(d) Size (LxWxH) : 1200x1000x600mm\n(e) Net Weight : 130 Kg\n(f) Heating System : LPG (Liquefied Petroleum gas) cylinder using heavy duty brass burners for tank and shoes.\n(g) Thickness of Bottom Line : 1-2.5mm\n(h) Frame Structure and Tanks : Made of Stainless Steel\n(j) Rear Wheel Lock : The caster swivel wheel can be locked in the straight forward direction for better directional stability on straight stretches.\n(k) Line Width : Machine is capable of laying strips of width ranging from 100 mm to 500 mm depending upon the size of shoe attached.\n(l) Alming Device : Foldable device of 600mm length approximately.\n(m) Making Thickness : 0 to 3 mm adjustable.\n(n) Temperature Gauge : One gauge of 300 mm length having capacity to measure up to 300 degrees is supplied with the machine.\n(o) Shoes : Made of highly durable material with carbide tips for proper and smooth movement.\n
(1) GRACO/ HOFMANN/ AMITEK
1
Nos
2
2
Thermoplastic Pre Heater with Gear box driven System\nTechnical Specifications :\n\n(a) Pre Heater Shaft : Solid shaft ribbon blender in stirring system\n(b) Engine : Powered by 6 HP Diesel Engine\n(c) Paint Tank : 300 Kgs (12 Bags) Capcity Thermal Oil Jacketed for easy operation.\n(d) Temperature Gauge : Heavy duty Analogue Temprature Gauge to Monitor Heating Process.\n(e) Meterial Temperature : 180-220 Degree C\n(f) Heating System : LPG (Liquefied Petroleum Gas) Cyliinder Using Heavy Duty Brass Burners for Tank (Direct Injection Stoves).\n(g) Body Material : Made of Special Stainless Steel with heating resistance, oxidation resistance and melting quality is much better.\n(h) Structural Design : Chassis and Main frame made of low carbon channels.\n(j) Paint Capacity : 300 KG TRM Paint (12 bags)\n(k) Agitator : Gear Box Driven Stirrer\n(l) Size (in MM) : H-1000 x L-1000 x W-1200\n(m) Net Weight : 500 Kg approx\n(n) Machine System : Machine shall provide bearing support to the gear box
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
