}

Supply Of Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure, Malari (UK)-Uttarakhand

Indian Army has published Supply Of Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure. Submission Date for this Tender is 19-05-2020. General Hardware Tenders in Malari (UK) Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

24029450
Corrigendum : Supply Of Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure
Open Tender
Indian
Uttarakhand
Malari (Uk)
19-05-2020

Tender Details

Supply Of Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure - 2 Srt 2100Mm Long 615Mm Wide, 2Mm Thick Isi Mark Hot Rolled Carbon Steel Sheets, Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make: Sail / Tata / Ispat / Jindal With 8 Nos Of Capsule Shaped Hole Having 10Mm Dia. 3 Ismb 250 ( 3400 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make : Sail / Tata / Ispat / Jindal 4 Ismb 250 ( 2200 Mm Long ) : Make Sail / Tata / Ispat / Jindal Conforming To Is-226 Shall Be Pre-Painted With Two Coats Of Og Paint Over A Coat Of Primer 5 Ismb 150 ( 1200 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide.Make : Sail / Tata / / Ispat / Jindal 6 Ismb 150 ( 1000 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make : Sail / Tata / / Ispat / Jindal 7 Loop Holes Of Size 600X500 Mm. A Trapezoidal Frame As Per The Drawing Shall Be Made Of Angle Iron 50X50x6 Mm, 45X45x6 Mm And Flat Iron 40X6 Mm Covered With 2 Mm Thick Ms Sheet From Inside On Four Sides Except Outer And Inner Opening With 4 Nos Hold Fast Size 200X50x6 Mm Flat Iron Two On Either Side With 02 X Ms Doors Made Of 8 Mm Thick Ms Plate 300X480 Mm With Sliding Slit Of 75X75 Mm On One Door. The Doors Should Be Fixed With Required Nos Of Heavy Duty Box Hinges Of 10 Mm Size. With The Dimension Of The Outer Opening Of The Loop Hole Box Being 900Mm X 800Mm. Ms Tower Bolt 2 Nos 16 Mm Dia 200 Mm Long To Be Provided To Shut The Doors. The Doors Should Be Opening Inside With Locking Arrangement In The Form Of Hook To Prevent The Door From Closing Back Again Whenever Required. Edges Of The Loop Holes To Be Chamfered Evenly. All Steel Parts Shall Be Conforming To Is-226 & Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Sail / Tata / Ispat / Jindal Brand Iron Parts To Be Used For The Loophole Fabrication. 8 Steel Door Of Size 900X1800 Mm Shall Be Provided As Per Drawing. Main Frame Work Shall Be Of Ms Angle 50X50x6 Mm. Ms Sheet 2 Mm Thick Shall Be Provided As Cladding Of The Door With Flat Iron 25X4 Mm Bracings Including Locking Arrangements On Both Sides Of The Shutters. The Door Shall Be Open-Able Inwards. The Door Shall Have Sliding Opening 900Mm X 250Mm Made Of 14 Guage Ms Sheet With Knobs, With 01 Nos 12Mm Dia Guard Bar At 1200 Mm From Bottom. Necessary Handles And Other Fittings Will Be Provided Both Sides Of Door. The Door Frame Will Have 06 Nos Hold Fast 200 Mm Long Made Of 50X6 Mm Flat Iron. Job No Will Be Engraved On The Inner Side. Door Will Be Attatched To The Frame Work With The Help Of 03 X Hinges, Fitted With Nuts And Bolts. Both Framework And Door Will Have The Flexibility To Put Hinges On Either Side Of The Frame. All Steel Parts Shall Be Conforming To Is-226 And Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Sail / Tata / Ispat / Jindal Brand Iron Parts To Be Used For The Door Fabrication. 9 10 Mm Dia Bolts With Nut & Bitumen Washer 150Mm Long With Isi Mark For Fixing Srt 10 Tmt Bar 08 Mm Dia Confirming Is - 1786 ( 2008 ) And Make: Sail / Tata / Rinl / Srmb / Jay Balaji / Shyamsteel / Ispat / Jindal 11 Construction And Hardware Stores At Malari Loc 12 Binding Wire 0.9Mm Dia. Make : Sail / Tata / Ispat / Jindal 13 Cement In Polythene Bags 50 Kgs Each Grade 43 Opc , Is-8112-1989 Make : Grasim / Ultra Tech / Ambuja / Jay Pee / J K / Acc 14 Quick Setting Compound In Air Tight Container Of 10 / 01 Ltr Each Make : Aqualac / Jk / Vikram / Cico / Duroseal / Imperial 15 Water Proofing Compound In Packs Of 10 / 01 Kg Each Confirming To Is-2645-1975. Make : Duroseal / Imperial / Acco Proof / Cicco / Sika 16 Lime ( Suryacem ) 17 Pbs Roll Is 1322-62 Weight Min 46 Kgs Per Roll And Minimum Length 20 Mtr With Adhesive Make: Shalimar / Macefelt / Iwl Chennai / National 18 Hdpe Sand Bags With Thin Plastic Inner, Length -630Mm & Width-350Mm & Weight-80 Gms Minimum, Colour - Sand 19 Jute Sand Bags With Length-630Mm & Width-350Mm & Weight-80 Gms Minimum, Colour – 50% Sand And 50% Og 20 Paint Disruptive Og Colour Ist Quality In 10 / 01 Ltr Each. Make: Asian / Shalimar / Berger / Nerolac 21 Paint Disruptive Sand Colour Ist Quality In 10 / 01 Ltr Each. Make: Asian / Shalimar / Berger 22 Polythene Sheet Colourless And Weight Of Sheet Shall Not Be Less Than 50 Gm / Sqm 23 Polythene Sheet Black And Weight Of Sheet Shall Not Be Less Than 70 Gm / Sqm 24 Lightning Conductor ( Jelly Filled ) Complete Set, Make - Radiance / Powercon / Ennov / Ashlok. ( 1 Set Having Fwg Accessories ) ( A ) Prongs Complete Set Made Out Of Alumn Conduct 20Mm Dia 450Mm Long With Stand / Base Plate With Minimum Thread 1Isi Mark - Set 01, ( B ) Wooden Block Size 150X150x120mm - Nos -10, ( C ) Aluminium Strip 25Mmx3.15Mm Wide With Fixing Screws For Roof Conductors Of Isi Mark- Mtr - 30, ( D ) Clamp For Fixing Of Aluminium Strip With Wooden Block Nos-40, ( E ) Chemical Earthing Electrode Inner Dia 40Mm, Length 2000Mm, Conductor Size 25 X 3Mm, Wt Of Back Fill Compound 25 Kg, Load Bearing Capacity 50Kva, Make : Radiance / Powercon Nos-01, ( F ) Ci S Cover And Pit - Nos-01 25 Bitumen Primer As Per Is-8982 In Packs Of 10 / 01 Ltr Each Make Asian / Jonson &Nicholson / Stp Ltd 26 Primer Red Oxide In Packs Of 10 / 01 Ltr Each As Per Is-8982 Make: Asian / Shalimar / Berger / Nerolac 27 Thinner / Turpentine Oil Branded And Supply In Air Tight Container Of 10 / 01 Ltr Each Make : Asian / Berger / J&N Ltd / Shalimar 28 Hessian Cloth Of Sand Colour, 93Cm Wide And Minimum Weight Not Below 140Gm Per Running Meter 29 Cover Water Proof 225 Sqft Make : Shalimar / Century 30 Sand Coarse Confirming To Is-383-970, 2Nd Revision, From Natural Sources 31 Crushed Stone Aggregate 20 Mm Graded Confirming To Is-383-970, 2Nd Revision, From Natural Sources 32 Tools At Malari Loc 33 Crowbar Hexagonal 1200Mm Long X 40Mm Dia Make:Tata / Star / Royal Engineering 34 Round Nose Shovel Hand Gs 12 1.6 Kg With Handle 35 Axes Picks 3 Kg Head With 02 Handle With Rubber Grip Make: Aparia / Tata / Jindal. 36 Cross And Straight Peen Hammer 500 Gm With 02 Addl Handle With Rubber Grip. Nmake : Tata / Stanley / Taparia N 37 Round Nose Phawara 11X11.5X8.5 Make : Tata / Star / Royal Engineering 38 Pan Mortar ( Tasla ) 18 Dia Nmake:Tata / Star / Royal Engineering N 39 Trawl Brick 250Mm Make :Tata / Star / Royal Engineering 40 Wooden Gurumala 41 Plumb Bob Steel 42 Steel Gurumala 43 Ball Pane Hammer 500Gm With Isi Mark Nmake : Tata / Stanley / Taparia N 44 Chisel Cold 2 Kg 45 Scissor Of Size 300Mm Long For Cutting Of Pbs Roll 46 Set Of Bits For Drill Machine Gsr 12-2 Professional ( Consisting Of 10Bits ) Make : Taparia / Everest / Pye 47 Plier Side Cutting Make : Tata / Stanley N / Taparia 48 Hand Gloves Rubber Tata / Star / Royal Engineering 49 Water Level Pipe For Mesonary Work 50 Spirit Level 10 51 Mason Thread 100M 52 Wire Mesh For Seiving Sand ( 8X5 ) 53 Rope 1 Dia ( 50 Mtr ) 54 Adjustable Spanner 10 Make:Stanley N / Taparia 55 Spanner Ojde 13X14mm Make:Stanley / Taparia 56 Aluminium Stud 6 Long 57 Sledge Hammer 4 Kg Head Make : Tata / Nstanley / Taparia 58 Measuring Tape 5M Retractable Grade Ai-16 Nmake:Stanley / Bellstone 59 Measuring Tape 30 M Make:Stanley / Bellstone 60 Painting Brushes 3” Size Nylon Straight Nsmooth Bristles Bonded Properly And Best Quality 61 Working Gloves As Per Sample Approved 62 Working Goggles As Per Sample Approved 63 Pouch With Tools Make:Stanley / Taparia :- N ( I ) Measuring Tape 5Mtr - 01Nos N ( Ii ) Google / Eye Shield - 01 Nos N ( Iii ) Carabiner - 01 Nos N ( Iv ) Ball Peen Hammer - 01 Nos N ( V ) Screw Driver - 02 N ( 01X Crosshead And 01 X Flathead ) N ( Vi ) Cutting Plier - 01 Nos N ( Vii ) Led Torch ( 2Cell ) With 4 Cell. - 01 Nos N 64 Freeman / Fisco Pacer Measuring Tape 100 Rm 65 Electronic Cordless / Handheld Battery -Powered Painting Machine Make- Tapariya / Bosch With Isi Mark. 66 Safety Helmet 67 Solar Lantern With Solar Panel Used Indoor And Outdoor Super Bright Will Continuously Work For 12-14 Hours Approx Should Have Following Specification:- N ( I ) Power Source: Ac / 110, 220V, Rechargeable Battery:6V / 4.5Ah Sealed Lead -Acid, N ( Ii ) Light Source:36 Pcs Super Bright Led, 108 Lumen. N ( Iii ) Charging Time:7-8 Hours Approx In The Strong Sunlight For 3W Solar Light And 12 Hours Approx For Ac Charging Adaptor. N ( Iv ) Working Time: 12-15 Hours After Fully Charged. N ( V ) Material: Plastic With Protected Stainless Steel, N ( Vi ) Dimensions: 25.5 Cm Hight And 13 Cm Width.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 08-05-2020 date extension Date 19-05-2020
2 17-04-2020 Date extension Date 09-05-2020
3 26-03-2020 date Extension Date 18-04-2020

Key Value

Document Fees
Refer document
EMD
INR 33100.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail