Supply Of Engineering Items (Custom Fitting) Ss 316 Required For 15M Frp Boat (Yard 2158), Goa Shipyard Limited-Goa

Supply Of Engineering Items ( Custom Fitting ) Ss 316 Required For 15M Frp Boat ( Yard 2158 ) -1 Aft &Fwd Railing ( Ss 316 ) , Dia 32Mm, 2Mm Thick With Back Plate 2 Hand Rail On Forward Deck ( Top Side Of Bunk ) ( Ss 316 ) , Dia 32Mm, 2Mm Thick With Back Plate 3 Hand Rails Inside Wheelhouse 4 Canopy Frame ( Ss 316 ) With Back Plate 5 Ss 316 Bollards With Back Plates 6 Ss 316 Fairleads With Back Plate 7 Transom Guard ( Ss 316 ) With Aluminimum Chequered Plate, Holders To Engage The Portable Ladder 8 Ensign Staff ( Ss 316 ) 9 Weapon Mount / Gun Mount ( Ss 316 ) . As Per Reference Drawing 10 Refrigerator Stand ( Ss Angle 40X40x4mm ( L 1500Mm ) 11 Wheelhouse Support Angle 40X3 Mm 12 Ss 316 Tank Of 600 Lts For Fuel. The Class Inspection To Be Offered By The Firm For Pressure Test And Class Certificate To Be Submitted By The Firm. The Cost Towards Same To Be Included In The Bid. The Tank To Be Supplied Along With End Fittings Like Nozzle, Coupler For Fitment Of Valve Etc. In Addition To This, The Fuel Tank Also To Be Fitted With Sight Glass Level Gauges. It May Be Noted That Two Fuel Tanks Will Be Interconnected To Each Other And Suitable Fittings To Be Provided For The Same In Addition To Filling Point, Vent, Electric Fuel Sender Etc. The Tank Lid To Be Provided With Suitable Gasket. 13 Air Vent Ss 316 Fitting ( Goose Neck Type ) - 50 Mm 14 Ss 316 2 Goose Neck Vent 15 Ss 316 Air Intake Louvers On Sides For Engine Room Ventilation And Should Have Cover 16 Ss 316 Roll Bar With Mast With Back Plate. The Mast Should Cater For Fitment Of Various Navigation Lights, Lightening Arrestor, Loud Hailer Speaker, Radar Antenna Etc. 17 Ss 316 Railing For Console 18 Ss 316 Anchor Bow Roller With Teflon Roller 19 Ss 316 Life Raft Stand 20 Aluminum Platform Above Cardan Shaft, Plate Thickness 5Mm, With Ms Angle 40X40mm. 21 Ss 316 Fire Pump Bracket 22 Ss 316 Dg Room Air Inlet Louvers 23 Ss 316 E / R Air Inlet Louvers 24 Ss 316 Valve Block Stand 25 Ss 316 Pillars In E / R 26 Ss 316 Counterweight Emergency Shut Off Valve For Main Engines & Dg 27 Ss 316 Backing Plates For Seats In W / H 28 Ss 316 Gun Mount Guard 29 Ss 316 Ring Buoys & Si Light Stand 30 Ss 316 Life Raft Stand 31 Ss 316 Wet Exhaust Mounting Stand 32 Ss 316 Ladder For Dg Room & Engine Room & Wheelhouse Compartment. The Ladder To Be Supplied With Suitable Ladder Holder, Ladder Base & Ladder Locking Arrangement. 33 Ss 316 Sewage Tank Fixing Bracket 34 Ss 316 Water Lock Of Dg Bracket 35 Ss 316 Strainer For Dg Mounting Bracket 36 Ss 316 Strainer For Ac Mounting Bracket 37 Ss 316 Silencer For Dg Mounting Bracket 38 Ss 316 ( 2 ½” ) 90° Elbow For Wires On W / H 39 Ss 316 Clamps For Fitting Fireman Axe 40 Bulkhead Penetration 41 Bracket For Engine Room Gas Spring Back Plate 42 Engine Exhaust Pipe Support 43 Dg Mounting Channel 44 Key Switch Panel 45 Bunk Beds Plates 46 Ss 316 Entrance Railing 47 Ss 316 Hand Rail On W / H Top 48 Ss 316 Engine Coolant Tank Bracket 49 Ss 316 Bracket For Steering Cylinder 50 Ss 316 Canopy Railing With Backing Plates 51 Ss 316 Ss Plate For Mounting Of Wiper Motor Switches 52 Ss 316 Foldable Bunk Supporting Plates With Hinge System 53 Rub For Climbing On W / H 54 Foot Rest For Grp Seat Box

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	05-06-2020	Addendum to Technical Specification	Technical Bid	10-06-2020
2	07-04-2020	Date Corr	Date	22-04-2020
3	11-05-2020	Date Corrigendum	Date	26-05-2020
4	22-04-2020	Date Extension	Date	11-05-2020
5	27-05-2020	Date Corrigendumm	Date	10-06-2020

Refer document

INR 29000.0 /-

Refer document