Sales : +91-777 804 8217
| Sl No | Item Code | Item Name | Item Description | Unit | Quantity |
|---|---|---|---|---|---|
| 1 | 20GKKVT01 | Caliper outside spring it | Specification: 6 | No.s | 6 |
| 2 | 20GKKVT02 | caliper inside spring joint | Specification: 6 | No.s | 6 |
| 3 | 20GKKVT03 | caliper odd leg firm joint | Specification: 6 | No.s | 6 |
| 4 | 20GKKVT04 | steel rool metric & english | Specification: 6 | No.s | 6 |
| 5 | 20GKKVT05 | scriber 3MM | Specification: 6 | No.s | 6 |
| 6 | 20GKKVT06 | hammer ball pien with handle | Specification: 6 | No.s | 6 |
| 7 | 20GKKVT07 | centre punch | Specification: 6 | No.s | 6 |
| 8 | 20GKKVT08 | prick punch | Specification: 6 | No.s | 6 |
| 9 | 20GKKVT09 | divider spring joint | Specification: 6 | No.s | 6 |
| 10 | 20GKKVT10 | safety goggles clear glass good quantity | Specification: 6 | No.s | 6 |
| 11 | 20GKKVT11 | bench vice | Specification: 2 | No.s | 2 |
| 12 | 20GKKVT12 | dial vernier caliper with metric system NABL Lab certificate accorded | Specification: 4 | No.s | 4 |
| 13 | 20GKKVT13 | vernier bevlel protracter NABL Lab accridiatedlab certificate | Specification: 4 | No.s | 4 |
| 14 | 20GKKVT14 | Radius gauge | Specification: 1 | No.s | 1 |
| 15 | 20GKKVT15 | try square | Specification: 2 | No.s | 2 |
| 16 | 20GKKVT16 | magniflying glass -75mm | Specification: 3 | No.s | 3 |
| 17 | 20GKKVT17 | wheel dresser diamond | Specification: 1 | No.s | 1 |
| 18 | 20GKKVT18 | chalk board or mobile stand | Specification: 1 | No.s | 1 |
| 19 | 20GKKVT19 | stool | Specification: 4 | No.s | 4 |
| 20 | 20GKKVT20 | angel gauge trol grinding | Specification: 2 | No.s | 2 |
| 21 | 20GKKVT21 | revoluing centre to suit the lathe tail stock | Specification: 4 | No.s | 4 |
| 22 | 20GKKVT22 | bore dial gauge | Specification: 1 | No.s | 1 |
| 23 | 20GKKVT23 | Drill machine piller type motarised | Specification: 1 | No.s | 1 |
| 24 | 20GKKVT24 | Lathe machine ss&sc (All geared head stock) quick change gear box for metric and british thread | Specification: 1 | No.s | 1 |
| 25 | 20GKKVT25 | lathe machine ss&sc (all geared type)gap bed machine motarised & coolant suplied installation quick change gear box metrics & british thread | Specification: 1 | No.s | 1 |
| 26 | 20GKKVT26 | lathe machine tool-room ss&sc (all geared type) motarised& suplied with coolant installation , draw type collets set up to 25mm reliwing attachment | Specification: 1 | No.s | 1 |
| 27 | 20GKKVT27 | Allen Key set of 12 pieces (2mm to 14mm) | Specification: 12 | Set | 12 |
| 28 | 20GKKVT28 | Caliper inside 15 cm Spring | Specification: 12 | No.s | 12 |
| 29 | 20GKKVT29 | Calipers outside 15 cm spring | Specification: 12 | No.s | 12 |
| 30 | 20GKKVT30 | Dividers 15 cm Spring | Specification: 12 | No.s | 12 |
| 31 | 20GKKVT31 | Electrician Screw Driver 250mm | Specification: 12 | No.s | 12 |
| 32 | 20GKKVT32 | Philips Screw Driver set of 5 pieces (100 mm to 300 mm) | Specification: 10 | No.s | 10 |
| 33 | 20GKKVT33 | Scriber 15 cm | Specification: 10 | No.s | 10 |
| 34 | 20GKKVT34 | Spanner socket with speed handle T-Bar rachet & Universel set of 28 pieces with box | Specification: 9 | No.s | 9 |
| 35 | 20GKKVT35 | Steel rule 30 cm inch and metric | Specification: 1 | No.s | 1 |
| 36 | 20GKKVT36 | Wire cutter and stripper | Specification: 8 | No.s | 8 |
| 37 | 20GKKVT37 | Adjustable spanner (pipe wrench 350 mm) | Specification: 2 | No.s | 2 |
| 38 | 20GKKVT38 | Air blow gun with standard accessories | Specification: 1 | No.s | 1 |
| 39 | 20GKKVT39 | Ac alternet slip ring puller | Specification: 1 | No.s | 1 |
| 40 | 20GKKVT40 | Air impact wrench with standard accessories | Specification: 2 | No.s | 2 |
| 41 | 20GKKVT41 | Air ratchet with standard accessories | Specification: 2 | No.s | 2 |
| 42 | 20GKKVT42 | Ammeter 300A/ 60A DC with external shunt | Specification: 4 | No.s | 4 |
| 43 | 20GKKVT43 | Auto Electrical test bench | Specification: 1 | No.s | 1 |
| 44 | 20GKKVT44 | Battery –charger | Specification: 1 | No.s | 1 |
| 45 | 20GKKVT45 | Belt Tensioner gauge | Specification: 1 | No.s | 1 |
| 46 | 20GKKVT46 | Car Jet washer with standard accessories | Specification: 1 | No.s | 1 |
| 47 | 20GKKVT47 | Compression testing gauge suitable for diesel Engine with standard accessories | Specification: 1 | No.s | 1 |
| 48 | 20GKKVT48 | Copper bit soldering Iron | Specification: 1 | No.s | 1 |
| 49 | 20GKKVT49 | Cylinder liner- Dry & wet liner, press fit & slidefit liner | Specification: 1 | No.s | 1 |
| 50 | 20GKKVT50 | Dial gauge type 1 Gr. A (complete with clamping devices and with magnetic stand) | Specification: 1 | No.s | 1 |
| 51 | 20GKKVT51 | Different type of Engine Bearing model | Specification: 1 | No.s | 1 |
| 52 | 20GKKVT52 | Different type of piston model | Specification: 1 | No.s | 1 |
| 53 | 20GKKVT53 | Drift Punch Copper 15 Cm | Specification: 2 | No.s | 2 |
| 54 | 20GKKVT54 | Drill twist 1.5 mm to 15mm (various sizes) by 0.5mm | Specification: 4 | No.s | 4 |
| 55 | 20GKKVT55 | Electric testing screw driver | Specification: 4 | No.s | 4 |
| 56 | 20GKKVT56 | Engineer’s square 15 cm. Blade | Specification: 2 | No.s | 2 |
| 57 | 20GKKVT57 | Engineer’s stethoscope | Specification: 1 | No.s | 1 |
| 58 | 20GKKVT58 | File, Square 20 cm second cut | Specification: 2 | No.s | 2 |
| 59 | 20GKKVT59 | File, 30 cm round | Specification: 4 | No.s | 4 |
| 60 | 20GKKVT60 | File, triangular 15 cm second cut | Specification: 2 | No.s | 2 |
| 61 | 20GKKVT61 | Files assorted sizes and types including safe edge file (20 Nos) | Specification: 2 | No.s | 2 |
| 62 | 20GKKVT62 | Flat File 25 cm second cut | Specification: 2 | No.s | 2 |
| 63 | 20GKKVT63 | Flat File 35 cm bastard | Specification: 2 | No.s | 2 |
| 64 | 20GKKVT64 | Fuel feed pump for diesel | Specification: 1 | No.s | 1 |
| 65 | 20GKKVT65 | Grease Gun | Specification: 1 | No.s | 1 |
| 66 | 20GKKVT66 | Grease Gun heavy duty trolly type | Specification: 1 | No.s | 1 |
| 67 | 20GKKVT67 | Growler | Specification: 1 | No.s | 1 |
| 68 | 20GKKVT68 | Hacksaw frame adjustable 20-30 cm | Specification: 6 | No.s | 6 |
| 69 | 20GKKVT69 | Hammer Chipping 0.25 Kg | Specification: 5 | No.s | 5 |
| 70 | 20GKKVT70 | Hammer copper 1 Kg with handle | Specification: 3 | No.s | 3 |
| 71 | 20GKKVT71 | Hammer Mallet | Specification: 1 | No.s | 1 |
| 72 | 20GKKVT72 | Hammer Plastic | Specification: 4 | No.s | 4 |
| 73 | 20GKKVT73 | Hand operated crimping tool (i) for crimping up to 4mm and (ii) for crimping up to 10mm | Specification: 2 | No.s | 2 |
| 74 | 20GKKVT74 | Hollow Punch set of seven pieces 6mm to 15mm | Specification: 1 | Set | 1 |
| 75 | 20GKKVT75 | Injector – Multi hole type, Pintle type | Specification: 4 | No.s | 4 |
| 76 | 20GKKVT76 | Injector testing set (Hand tester) | Specification: 1 | No.s | 1 |
| 77 | 20GKKVT77 | Insulated Screw driver 20 cm x 9mm blade | Specification: 4 | No.s | 4 |
| 78 | 20GKKVT78 | Insulated Screw driver 30 cm x 9mm blade | Specification: 4 | No.s | 4 |
| 79 | 20GKKVT79 | Magneto spanner set with 8 spanners | Specification: 1 | No.s | 1 |
| 80 | 20GKKVT80 | Magnifying glass 75mm | Specification: 2 | No.s | 2 |
| 81 | 20GKKVT81 | Multimeter digital | Specification: 4 | No.s | 4 |
| 82 | 20GKKVT82 | Oil can 0.5/0.25 liter capacity | Specification: 3 | No.s | 3 |
| 83 | 20GKKVT83 | Oil pump for dismantling and assembling. (Automotive) | Specification: 2 | No.s | 2 |
| 84 | 20GKKVT84 | Piston Ring expander and remover. | Specification: 1 | No.s | 1 |
| 85 | 20GKKVT85 | Piston Ring groove cleaner. | Specification: 1 | No.s | 1 |
| 86 | 20GKKVT86 | Prick Punch 15 cm | Specification: 2 | No.s | 2 |
| 87 | 20GKKVT87 | Punch Letter 4mm (Number) | Specification: 1 | Set | 1 |
| 88 | 20GKKVT88 | Radiator cut section-cross flow | Specification: 1 | No.s | 1 |
| 89 | 20GKKVT89 | Radiator cut section-down flow | Specification: 2 | No.s | 2 |
| 90 | 20GKKVT90 | Radiator pressure cap | Specification: 2 | No.s | 2 |
| 91 | 20GKKVT91 | Scraper Triangular 25 cm | Specification: 2 | No.s | 2 |
| 92 | 20GKKVT92 | Scriber with scribing black universal | Specification: 1 | No.s | 1 |
| 93 | 20GKKVT93 | Sheet Metal Gauge | Specification: 2 | No.s | 2 |
| 94 | 20GKKVT94 | Spanner T. flocks for screwing up and up-screwing inaccessible positions | Specification: 1 | No.s | 1 |
| 95 | 20GKKVT95 | Spanner, adjustable 15cm. | Specification: 1 | No.s | 1 |
| 96 | 20GKKVT96 | Spark plug spanner 14mm x 18mm x Size | Specification: 1 | No.s | 1 |
| 97 | 20GKKVT97 | Steel measuring tape 10 meter in a case | Specification: 2 | No.s | 2 |
| 98 | 20GKKVT98 | Straight edge gauge 2 ft. | Specification: 2 | No.s | 2 |
| 99 | 20GKKVT99 | Stud extractor set of 3 | Specification: 1 | Set | 1 |
| 100 | 20GKKVT100 | Stud remover with socket handle | Specification: 1 | No.s | 1 |
| 101 | 20GKKVT101 | Surface gauge with dial test indicator plunger type i.e. 0.01 mm | Specification: 4 | No.s | 4 |
| 102 | 20GKKVT102 | Tandem master cylinder with booster | Specification: 4 | No.s | 4 |
| 103 | 20GKKVT103 | Thermostat | Specification: 2 | No.s | 2 |
| 104 | 20GKKVT104 | Thread pitch gauge metric, BSW | Specification: 2 | No.s | 2 |
| 105 | 20GKKVT105 | Timing lighter | Specification: 1 | No.s | 1 |
| 106 | 20GKKVT106 | Turbocharger cut sectional view | Specification: 1 | No.s | 1 |
| 107 | 20GKKVT107 | Tyre pressure gauge with holding nipple | Specification: 2 | No.s | 2 |
| 108 | 20GKKVT108 | Vacuum gauge to read 0 to 760 mm of Hg. | Specification: 2 | No.s | 2 |
| 109 | 20GKKVT109 | Vice grip pliers | Specification: 2 | No.s | 2 |
| 110 | 20GKKVT110 | Water pump for dismantling and assembling | Specification: 3 | No.s | 3 |
| 111 | 20GKKVT111 | Wire Gauge (metric) | Specification: 2 | No.s | 2 |
| 112 | 20GKKVT112 | Working Model of Air Brake assemble | Specification: 1 | No.s | 1 |
| 113 | 20GKKVT113 | Alternator assemble used for LMV | Specification: 1 | No.s | 1 |
| 114 | 20GKKVT114 | Cutsection Model of Mock Layout of amotor car electrical System working model | Specification: 1 | No.s | 1 |
| 115 | 20GKKVT115 | Cutsection of crossply & radial tyres | Specification: 1 | No.s | 1 |
| 116 | 20GKKVT116 | Cut Section working model of centrifugual cluth assembly | Specification: 1 | No.s | 1 |
| 117 | 20GKKVT117 | Demonstration board of electronic ignition system, ignition coil | Specification: 1 | No.s | 1 |
| 118 | 20GKKVT118 | Demonstration board of MPFI System. | Specification: 1 | No.s | 1 |
| 119 | 20GKKVT119 | Drum brake assembly in working condition | Specification: 1 | No.s | 1 |
| 120 | 20GKKVT120 | Cut Section models of shock absorbers | Specification: 1 | No.s | 1 |
| 121 | 20GKKVT121 | Cut section working model of automatic tranmission gear box | Specification: 1 | No.s | 1 |
| 122 | 20GKKVT122 | Front axle (Rzeeppa joint) with stand for dismarting & assembling | Specification: 1 | No.s | 1 |
| 123 | 20GKKVT123 | Funtional/Experiment model of different type of sensors | Specification: 1 | No.s | 1 |
| 124 | 20GKKVT124 | Steering assembly 1. Rack & pinion 2. Worm & roller 3. Recirculating ball 4. Power steering 5. Electric Assisted power Steering | Specification: 1 | Set | 1 |
| 125 | 20GKKVT125 | Synchronous Gear box with stand for dismanting & assembly | Specification: 1 | No.s | 1 |
| 126 | 20GKKVT126 | Tandem master cylinder with booster | Specification: 1 | No.s | 1 |
| 127 | 20GKKVT127 | Tubed type of car, trucks & motorcycle | Specification: 1 | No.s | 1 |
| 128 | 20GKKVT128 | Tyre & split rain wheel assembly | Specification: 1 | No.s | 1 |
| 129 | 20GKKVT129 | Working model of power window | Specification: 1 | No.s | 1 |
| 130 | 20GKKVT130 | Tubless tyre of cars & Trucks | Specification: 1 | No.s | 1 |
| 131 | 20GKKVT131 | Working model of torgue converter | Specification: 1 | No.s | 1 |
| 132 | 20GKKVT132 | Air-conditioned CRDI vehicle in running conditon LMV | Specification: 1 | No.s | 1 |
| 133 | 20GKKVT133 | Diesel Engine CRDI - 4stroke of dismanting & aasembling with swivelling Stand | Specification: 1 | No.s | 1 |
| 134 | 20GKKVT134 | Spring tension tester | Specification: 1 | No.s | 1 |
| 135 | 20GKKVT135 | working condition of diesel engine CRDI - 4 stroke engine, assembly with fault simulation board | Specification: 1 | No.s | 1 |
| 136 | 20GKKVT136 | Cut Section of 4/6 cylinder diesel engine in moving condition to show movement of internal parts | Specification: 1 | No.s | 1 |
| 137 | 20GKKVT137 | Diesel Engine six cylinder in running condition | Specification: 1 | No.s | 1 |
| 138 | 20GKKVT138 | Air Bag simulator | Specification: 1 | No.s | 1 |
| 139 | 20GKKVT139 | Air conditioning service Unit(car) | Specification: 1 | No.s | 1 |
| 140 | 20GKKVT140 | Four stroke petrol engine with CNG setup working condition | Specification: 1 | No.s | 1 |
| 141 | 20GKKVT141 | Heavy commericial vehicle | Specification: 1 | No.s | 1 |
| 142 | 20GKKVT142 | MPFI petrol engine with swirelling stand along with special tools for dismantling & assembling | Specification: 1 | No.s | 1 |
| 143 | 20GKKVT143 | Starter motor axial type, pre-engagement type & co-axial type. | Specification: 1 | Set | 1 |
| 144 | 20GKKVT144 | Ultrasonic Injection cleaning equipment | Specification: 1 | No.s | 1 |
| 145 | 20GKKVT145 | Wheel alignment Machine computerized 3D coptional | Specification: 1 | No.s | 1 |
| 146 | 20GKKVT146 | Wheel balancing machine | Specification: 1 | No.s | 1 |
| 147 | 20GKKVT147 | Working condition of petrol MPFI Engine assemble with fault simulation boad | Specification: 1 | No.s | 1 |
| 148 | 20GKKVT148 | Vernier caliper 0 to 300mm | Specification: 1 | No.s | 1 |
| 149 | 20GKKVT149 | FILE TRIANGUALAR SMOOTH | Specification: 8 | No.s | 8 |
| 150 | 20GKKVT150 | FILE FLAT BASTARD | Specification: 2 | No.s | 2 |
| 151 | 20GKKVT151 | FILE FLAT BASTARD | Specification: 2 | No.s | 2 |
| 152 | 20GKKVT152 | FILE HALF ROUND SECOND CUT | Specification: 2 | No.s | 2 |
| 153 | 20GKKVT153 | FILE HALF ROUND BASTARD | Specification: 6 | No.s | 6 |
| 154 | 20GKKVT154 | FILE ROUND BASTERD | Specification: 10 | No.s | 10 |
| 155 | 20GKKVT155 | FILE HAND SECOND CUT | Specification: 10 | No.s | 10 |
| 156 | 20GKKVT156 | DOUBLE ENDED TUBULAR BOX SPANNER SBT | Specification: 1 | Set | 1 |
| 157 | 20GKKVT157 | VERNUER CALIPER | Specification: 3 | No.s | 3 |
| 158 | 20GKKVT158 | LOCKERS WITH 8 DRAWERS ( STANDARD SIZE) | Specification: 2 | No.s | 2 |
| 159 | 20GKKVT159 | BLACK BOARD WITH EASEL | Specification: 1 | No.s | 1 |
| 160 | 20GKKVT160 | POWER TOOLS FOR FASTING | Specification: 1 | No.s | 1 |
| 161 | 20GKKVT161 | MACHIVE VICE | Specification: 2 | No.s | 2 |
| 162 | 20GKKVT162 | DIFFERENT PROFILE GAUGES (PLATE-TYE)- FOR DEMONSTRATION | Specification: 4 | No.s | 4 |
| 163 | 20GKKVT163 | INDEXABLE BORING BAR WITH INSERTS | Specification: 4 | No.s | 4 |
| 164 | 20GKKVT164 | TEMPERATURE GAUGE | Specification: 1 | No.s | 1 |
| 165 | 20GKKVT165 | DOWEL PIN (STRAIGHT) | Specification: 1 | No.s | 1 |
| 166 | 20GKKVT166 | STANDARD TAP SCREWS | Specification: 1 | No.s | 1 |
| 167 | 20GKKVT167 | LAPPING PLATE | Specification: 2 | No.s | 2 |
| 168 | 20GKKVT168 | MEDIUM CARBON HEAT TRATED ALLOY STEEL METRIC STUDS AND BOLTS ALONG WITH NUTS (FOR DISPLAY) OF STANDARD LENGTH | Specification: 2 | No.s | 2 |
| 169 | 20GKKVT169 | CAPS SCREWS | Specification: 2 | No.s | 2 |
| 170 | 20GKKVT170 | DRILL GAUGES | Specification: 2 | No.s | 2 |
| 171 | 20GKKVT171 | CAST IRON GLOBE VALVE(FLANGED TYPE) | Specification: 2 | No.s | 2 |
| 172 | 20GKKVT172 | C,1,SLUICE /GATE VAIVE (FLANGED TYPE) | Specification: 2 | No.s | 2 |
| 173 | 20GKKVT173 | STOP COCK | Specification: 2 | No.s | 2 |
| 174 | 20GKKVT174 | M.S.PIPE | Specification: 1 | No.s | 1 |
| 175 | 20GKKVT175 | G I PIPE | Specification: 1 | No.s | 1 |
| 176 | 20GKKVT176 | SLIP ON - FORGED STEEL FLAN GB | Specification: 4 | No.s | 4 |
| 177 | 20GKKVT177 | BOLT & NUT WITH WASHER | Specification: 16 | No.s | 16 |
| 178 | 20GKKVT178 | JiG & FIXTURE (SAMPLE) | Specification: 1 | No.s | 1 |
| 179 | 20GKKVT179 | PULLEYS (FORV-BELTOR FLAT BELT | Specification: 1 | No.s | 1 |
| 180 | 20GKKVT180 | DAMAGED OLD SPUR GEAR | Specification: 2 | No.s | 2 |
| 181 | 20GKKVT181 | V BELT & FLAT BELT | Specification: 1 | No.s | 1 |
| 182 | 20GKKVT182 | PACKING GASKET | Specification: 1 | No.s | 1 |
| 183 | 20GKKVT183 | WASHER ,CLUTCH,KEYS,JIB,COTTER,&CIRCLIP | Specification: 2 | No.s | 2 |
| 184 | 20GKKVT184 | DRILL DRIFT | Specification: 2 | No.s | 2 |
| 185 | 20GKKVT185 | BEARING DIFFERENT TYPES | Specification: 1 | No.s | 1 |
| 186 | 20GKKVT186 | LIFTING SLING | Specification: 2 | No.s | 2 |
| 187 | 20GKKVT187 | VERNIER BEVEL PROTECTOR | Specification: 1 | No.s | 1 |
| 188 | 20GKKVT188 | ADJUSTABLE PIPE CHAIN TONGE TO TAKE PIPES | Specification: 1 | No.s | 1 |
| 189 | 20GKKVT189 | OXYGEN & ACETYLENE CYLENDERS | Specification: 1 | Set | 1 |
| 190 | 20GKKVT190 | Compressor unit | Specification: 1 | No.s | 1 |
| 191 | 20GKKVT191 | Pneumatic Trainer Kit, set consisting of the following matching components and accessories: | Specification: 1 | Set | 1 |
| 192 | 20GKKVT192 | I. Single acting cylinder | Specification: 1 | No.s | 1 |
| 193 | 20GKKVT193 | II. Double acting cylinder | Specification: 1 | No.s | 1 |
| 194 | 20GKKVT194 | III. 3/2-way valve | Specification: 2 | No.s | 2 |
| 195 | 20GKKVT195 | IV. 3/2-way valve | Specification: 1 | No.s | 1 |
| 196 | 20GKKVT196 | V. One-way flow control valve | Specification: 2 | No.s | 2 |
| 197 | 20GKKVT197 | VI. 5/2-way valve | Specification: 1 | No.s | 1 |
| 198 | 20GKKVT198 | VII. 5/2-way valve | Specification: 1 | No.s | 1 |
| 199 | 20GKKVT199 | VIII. 5/2-way pneumatic actuated | Specification: 1 | No.s | 1 |
| 200 | 20GKKVT200 | IX. 3/2-way roller lever valve | Specification: 2 | No.s | 2 |
| 201 | 20GKKVT201 | X. Shuttle valve (OR) | Specification: 1 | No.s | 1 |
| 202 | 20GKKVT202 | XI. Two-pressure valve (AND) | Specification: 1 | No.s | 1 |
| 203 | 20GKKVT203 | XII. Manifold with self-closing | Specification: 1 | No.s | 1 |
| 204 | 20GKKVT204 | XIll. Pushbutton station for electrical signal input | Specification: 1 | No.s | 1 |
| 205 | 20GKKVT205 | XlV. Relay station | Specification: 1 | No.s | 1 |
| 206 | 20GKKVT206 | XV. 3/2-way single solenoid valve | Specification: 1 | No.s | 1 |
| 207 | 20GKKVT207 | XVI. 5/2-way single solenoid valve | Specification: 1 | No.s | 1 |
| 208 | 20GKKVT208 | VII. 5/2-way double solenoid valve | Specification: 1 | No.s | 1 |
| 209 | 20GKKVT209 | Vlll. Power supply unit, | Specification: 1 | No.s | 1 |
| 210 | 20GKKVT210 | XlX. Profile plate, Anodised Aluminium | Specification: 1 | Set | 1 |
| 211 | 20GKKVT211 | Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, set with handles and individual locks, on metallic full panel drawer slide: | Specification: 1 | No.s | 1 |
| 212 | 20GKKVT212 | Carrier for mounting components, such as PB & relay boxes. | Specification: 1 | No.s | 1 |
| 213 | 20GKKVT213 | Cut section model for pneumatic components | Specification: 1 | Set | 1 |
| 214 | 20GKKVT214 | Hydraulic Trainer Kit, set consisting of the following matching components and accessories: | Specification: 1 | Set | 1 |
| 215 | 20GKKVT215 | I. Hydraulic Power pack | Specification: 1 | No.s | 1 |
| 216 | 20GKKVT216 | II. Pressure relief valve | Specification: 1 | No.s | 1 |
| 217 | 20GKKVT217 | III. Drip tray, steel | Specification: 1 | No.s | 1 |
| 218 | 20GKKVT218 | IV. Pressure Gauge | Specification: 1 | No.s | 1 |
| 219 | 20GKKVT219 | V. Four-Way distributor | Specification: 1 | No.s | 1 |
| 220 | 20GKKVT220 | VI. Double acting hydraulic cylinder | Specification: 1 | No.s | 1 |
| 221 | 20GKKVT221 | VII. Suitable Weight | Specification: 1 | No.s | 1 |
| 222 | 20GKKVT222 | VIII. Mounting kit for weight | Specification: 1 | No.s | 1 |
| 223 | 20GKKVT223 | IX. 3/2-way directional control valve | Specification: 1 | No.s | 1 |
| 224 | 20GKKVT224 | X. 4/2-way directional control valve | Specification: 1 | No.s | 1 |
| 225 | 20GKKVT225 | XI. 4/3-way directional control valve | Specification: 1 | No.s | 1 |
| 226 | 20GKKVT226 | XII. Non-return valve. | Specification: 1 | No.s | 1 |
| 227 | 20GKKVT227 | XIII. Pilot-operated check valve | Specification: 1 | No.s | 1 |
| 228 | 20GKKVT228 | XIV. One-way flow control valve | Specification: 1 | No.s | 1 |
| 229 | 20GKKVT229 | XV. T-Connector with self sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.). | Specification: 2 | No.s | 2 |
| 230 | 20GKKVT230 | XVI. Profile plate, | Specification: 1 | Set | 1 |
| 231 | 20GKKVT231 | Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, set with handles and individual locks, on metallic full panel drawer slide: | Specification: 1 | No.s | 1 |
| 232 | 20GKKVT232 | Cut-section models for hydraulic components | Specification: 1 | Set | 1 |
| 233 | 20GKKVT233 | Connecting screwdriver | Specification: 30 | No.s | 30 |
| 234 | 20GKKVT234 | Screw driver set | Specification: 8 | No.s | 8 |
| 235 | 20GKKVT235 | Insulated combination pliers | Specification: 2 | No.s | 2 |
| 236 | 20GKKVT236 | Insulated side cutting pliers | Specification: 4 | No.s | 4 |
| 237 | 20GKKVT237 | Soldering iron | Specification: 22 | No.s | 22 |
| 238 | 20GKKVT238 | Electrician knife | Specification: 22 | No.s | 22 |
| 239 | 20GKKVT239 | Tweezers | Specification: 30 | No.s | 30 |
| 240 | 20GKKVT240 | Digital multimeter | Specification: 37 | No.s | 37 |
| 241 | 20GKKVT241 | Soldering iron Changeable bits | Specification: 42 | No.s | 42 |
| 242 | 20GKKVT242 | De - soldering pump | Specification: 22 | No.s | 22 |
| 243 | 20GKKVT243 | Soldering Iron | Specification: 6 | No.s | 6 |
| 244 | 20GKKVT244 | Magneto spanner set | Specification: 2 | No.s | 2 |
| 245 | 20GKKVT245 | Screw driver | Specification: 4 | No.s | 4 |
| 246 | 20GKKVT246 | Steel rule | Specification: 2 | No.s | 2 |
| 247 | 20GKKVT247 | Scriber straight | Specification: 2 | No.s | 2 |
| 248 | 20GKKVT248 | Soldering Iron | Specification: 1 | No.s | 1 |
| 249 | 20GKKVT249 | ALLEN KEY SET | Specification: 2 | No.s | 2 |
| 250 | 20GKKVT250 | Tubular box spanner | Specification: 1 | No.s | 1 |
| 251 | 20GKKVT251 | Magnifying lenses | Specification: 3 | No.s | 3 |
| 252 | 20GKKVT252 | Continuity tester | Specification: 6 | No.s | 6 |
| 253 | 20GKKVT253 | Soldering iron | Specification: 6 | No.s | 6 |
| 254 | 20GKKVT254 | Cold chisel | Specification: 1 | No.s | 1 |
| 255 | 20GKKVT255 | Scissors | Specification: 1 | No.s | 1 |
| 256 | 20GKKVT256 | Handsaw | Specification: 1 | No.s | 1 |
| 257 | 20GKKVT257 | Laptop, Notebook | Specification: 2 | No.s | 2 |
| 258 | 20GKKVT258 | Intel Desktop based PC with LCD monitor | Specification: 1 | No.s | 1 |
| 259 | 20GKKVT259 | Tablet | Specification: 2 | No.s | 2 |
| 260 | 20GKKVT260 | Printers : Laserjet Copy, Scan, Print MFP | Specification: 2 | No.s | 2 |
| 261 | 20GKKVT261 | Network printer | Specification: 1 | No.s | 1 |
| 262 | 20GKKVT262 | LAN Cards, Wi-Fi LAN Cards | Specification: 6 | Set | 6 |
| 263 | 20GKKVT263 | Power Meter | Specification: 1 | No.s | 1 |
| 264 | 20GKKVT264 | Crimping tools | Specification: 6 | No.s | 6 |
| 265 | 20GKKVT265 | Computer Toolkits | Specification: 6 | No.s | 6 |
| 266 | 20GKKVT266 | Motherbords (of different make) | Specification: 4 | No.s | 4 |
| 267 | 20GKKVT267 | Cabinets | Specification: 4 | No.s | 4 |
| 268 | 20GKKVT268 | Procssors (of different make) | Specification: 4 | No.s | 4 |
| 269 | 20GKKVT269 | Hard Disk different types | Specification: 4 | No.s | 4 |
| 270 | 20GKKVT270 | Optical Drives | Specification: 4 | No.s | 4 |
| 271 | 20GKKVT271 | LCD/LED/TET Monitors | Specification: 2 | No.s | 2 |
| 272 | 20GKKVT272 | Pen Drives | Specification: 4 | No.s | 4 |
| 273 | 20GKKVT273 | External Hard disk | Specification: 2 | No.s | 2 |
| 274 | 20GKKVT274 | External DVD Writer | Specification: 2 | No.s | 2 |
| 275 | 20GKKVT275 | Anti static pads | Specification: 4 | No.s | 4 |
| 276 | 20GKKVT276 | Anti static Wrist wraps | Specification: 4 | No.s | 4 |
| 277 | 20GKKVT277 | SMPS | Specification: 4 | No.s | 4 |
| 278 | 20GKKVT278 | Digital Multimerers | Specification: 5 | No.s | 5 |
| 279 | 20GKKVT279 | External Hard disk | Specification: 2 | No.s | 2 |
| 280 | 20GKKVT280 | HD Display | Specification: 2 | No.s | 2 |
| 281 | 20GKKVT281 | Network storage | Specification: 2 | No.s | 2 |
| 282 | 20GKKVT282 | Card Reader | Specification: 2 | No.s | 2 |
| 283 | 20GKKVT283 | Game video card | Specification: 2 | No.s | 2 |
| 284 | 20GKKVT284 | Different types of memory cards | Specification: 2 | Set | 2 |
| 285 | 20GKKVT285 | Laptop kits | Specification: 12 | No.s | 12 |
| 286 | 20GKKVT286 | SMPS Trainer kit | Specification: 2 | No.s | 2 |
| 287 | 20GKKVT287 | UPS Trainer kit | Specification: 2 | No.s | 2 |
| 288 | 20GKKVT288 | Power electronics Trainer kit | Specification: 2 | No.s | 2 |
| 289 | 20GKKVT289 | Post error debugging card | Specification: 4 | No.s | 4 |
| 290 | 20GKKVT290 | SMPS Tester | Specification: 4 | No.s | 4 |
| 291 | 20GKKVT291 | PCI slot Testing tool | Specification: 4 | No.s | 4 |
| 292 | 20GKKVT292 | Linux Operating System | Specification: 2 | No.s | 1 |
| 293 | 20GKKVT293 | Network Management Software | Specification: 1 | No.s | 1 |
| 294 | 20GKKVT294 | MS Office | Specification: 2 | No.s | 2 |
| 295 | 20GKKVT295 | Anti - virus software | Specification: 2 | No.s | 2 |
| 296 | 20GKKVT296 | Data recovery software | Specification: 2 | No.s | 2 |
| 297 | 20GKKVT297 | Class Room Chairs | Specification: 20 | No.s | 20 |
| 298 | 20GKKVT298 | Air Conditioner 1.5 Ton | Specification: 2 | No.s | 2 |
| 299 | 20GKKVT299 | Telephone Line | Specification: 1 | No.s | 1 |
| 300 | 20GKKVT300 | Broadband Internet Connection | Specification: 1 | No.s | 1 |
| 301 | 20GKKVT301 | Hardware and Network Trainer kit | Specification: 6 | No.s | 6 |
| 302 | 20GKKVT302 | Wirelees Network Adapter | Specification: 6 | No.s | 6 |
| 303 | 20GKKVT303 | Wireless Access Point | Specification: 4 | No.s | 4 |
| 304 | 20GKKVT304 | Router | Specification: 4 | No.s | 4 |
| 305 | 20GKKVT305 | Managed Layer 2 Ethernet Switch | Specification: 2 | No.s | 2 |
| 306 | 20GKKVT306 | Managed Layer 3 Ethernet Switch | Specification: 2 | No.s | 2 |
| 307 | 20GKKVT307 | Network Training System | Specification: 2 | No.s | 2 |
| 308 | 20GKKVT308 | LAN Protocol Simulation and Analyser Software | Specification: 2 | No.s | 2 |
| 309 | 20GKKVT309 | Linux Server Operating System (Samba/Su-Se) | Specification: 1 | No.s | 1 |
| 310 | 20GKKVT310 | Network and Internet security trainer | Specification: 2 | No.s | 2 |
| 311 | 20GKKVT311 | LAN Cards, wi-fi LAN Card | Specification: 5 | No.s | 5 |
| 312 | 20GKKVT312 | Media Convertor | Specification: 4 | Set | 4 |
| 313 | 20GKKVT313 | UTP jack panel | Specification: 2 | No.s | 2 |
| 314 | 20GKKVT314 | SC Couplers | Specification: 12 | No.s | 12 |
| 315 | 20GKKVT315 | SC Pigitails | Specification: 12 | No.s | 12 |
| 316 | 20GKKVT316 | Fluke Meter | Specification: 2 | No.s | 2 |
| 317 | 20GKKVT317 | Crimping Tools | Specification: 6 | No.s | 6 |
| 318 | 20GKKVT318 | Switch with POE ports | Specification: 2 | No.s | 2 |
| 319 | 20GKKVT319 | POE adapters | Specification: 2 | No.s | 2 |
| 320 | 20GKKVT320 | Network Camera (Outdoor/ Indoor) | Specification: 2 | Set | 2 |
| 321 | 20GKKVT321 | Allen Key set of 12 pieces (2mm to 14mm) | Specification: 6 | No.s | 6 |
| 322 | 20GKKVT322 | Caliper inside 15 cm Spring | Specification: 6 | No.s | 6 |
| 323 | 20GKKVT323 | Calipers outside 15 cm spring | Specification: 6 | No.s | 6 |
| 324 | 20GKKVT324 | Center Punch 10 mm. Dia. x 100 mm. | Specification: 2 | No.s | 2 |
| 325 | 20GKKVT325 | Dividers 15 cm Spring | Specification: 6 | No.s | 6 |
| 326 | 20GKKVT326 | Electrician Screw Driver 250mm | Specification: 6 | No.s | 6 |
| 327 | 20GKKVT327 | Hammer ball peen 0.5 kg with handle | Specification: 6 | No.s | 6 |
| 328 | 20GKKVT328 | Hands file 20 cm. Second cut flat | Specification: 6 | No.s | 6 |
| 329 | 20GKKVT329 | Philips Screw Driver set of 5 pieces (100 mm to 300 mm) | Specification: 6 | No.s | 6 |
| 330 | 20GKKVT330 | Pliers combination 20 cm. | Specification: 6 | No.s | 6 |
| 331 | 20GKKVT331 | Screw driver 20cm.X 9mm. Blade | Specification: 2 | No.s | 2 |
| 332 | 20GKKVT332 | Screw driver 30 cm. X 9 mm. Blade | Specification: 2 | No.s | 2 |
| 333 | 20GKKVT333 | Spanner D.E. set of 12 pieces (6mm to 32mm) | Specification: 6 | No.s | 6 |
| 334 | 20GKKVT334 | Spanner, ring set of 12 metric sizes 6 to 32 mm. | Specification: 6 | No.s | 6 |
| 335 | 20GKKVT335 | Spanners socket with speed handle, T-bar, ratchet and universal upto 32 mm set of 28 pieces with box | Specification: 4 | No.s | 4 |
| 336 | 20GKKVT336 | Steel tool box with lock and key (folding type) 400x200x150 mm | Specification: 2 | No.s | 2 |
| 337 | 20GKKVT337 | Adjestable Spanner | Specification: 2 | No.s | 2 |
| 338 | 20GKKVT338 | Air bolwgun with standard accessories | Specification: 1 | No.s | 1 |
| 339 | 20GKKVT339 | Allen key set | Specification: 4 | No.s | 4 |
| 340 | 20GKKVT340 | Ammeter | Specification: 4 | No.s | 4 |
| 341 | 20GKKVT341 | Air impact wernch with standard asseries | Specification: 4 | No.s | 4 |
| 342 | 20GKKVT342 | Air ratchet with standard assedories | Specification: 4 | No.s | 4 |
| 343 | 20GKKVT343 | Angle Plate adjestable | Specification: 1 | No.s | 1 |
| 344 | 20GKKVT344 | Angle plate | Specification: 2 | No.s | 2 |
| 345 | 20GKKVT345 | Battery Charger | Specification: 1 | No.s | 1 |
| 346 | 20GKKVT346 | Bell tensionr Gauge | Specification: 1 | No.s | 1 |
| 347 | 20GKKVT347 | Caliper inside | Specification: 3 | No.s | 3 |
| 348 | 20GKKVT348 | Cliper outside | Specification: 3 | No.s | 3 |
| 349 | 20GKKVT349 | Clamps \c\ | Specification: 1 | No.s | 1 |
| 350 | 20GKKVT350 | Clamps \c\ | Specification: 1 | No.s | 1 |
| 351 | 20GKKVT351 | Clamps \c\ | Specification: 1 | No.s | 1 |
| 352 | 20GKKVT352 | Compression testing gauge suitable for disiel Engine with standered | Specification: 1 | No.s | 1 |
| 353 | 20GKKVT353 | Copper bit soldring iron | Specification: 1 | No.s | 1 |
| 354 | 20GKKVT354 | Cylinder liner press fit slide dry & wet fit liner | Specification: 1 | Set | 1 |
| 355 | 20GKKVT355 | D.C. Ohm meter | Specification: 2 | No.s | 2 |
| 356 | 20GKKVT356 | Depth micro meter | Specification: 4 | No.s | 4 |
| 357 | 20GKKVT357 | Diel gauge type with clamping magnetic stand | Specification: 4 | No.s | 4 |
| 358 | 20GKKVT358 | Different types of engine bearing model | Specification: 1 | Set | 1 |
| 359 | 20GKKVT359 | Different types of piston model | Specification: 1 | Set | 1 |
| 360 | 20GKKVT360 | Dividers | Specification: 3 | No.s | 3 |
| 361 | 20GKKVT361 | Drift punch copper | Specification: 2 | No.s | 2 |
| 362 | 20GKKVT362 | Drill twist | Specification: 3 | No.s | 3 |
| 363 | 20GKKVT363 | Electric testing screw driver | Specification: 4 | No.s | 4 |
| 364 | 20GKKVT364 | Engineers square | Specification: 3 | No.s | 3 |
| 365 | 20GKKVT365 | Engineers Stethoscope | Specification: 1 | No.s | 1 |
| 366 | 20GKKVT366 | File round | Specification: 3 | No.s | 3 |
| 367 | 20GKKVT367 | File Square | Specification: 3 | No.s | 3 |
| 368 | 20GKKVT368 | File Square | Specification: 3 | No.s | 3 |
| 369 | 20GKKVT369 | File assorted sizes and types including safe edge file (20 No\s) | Specification: 2 | Set | 2 |
| 370 | 20GKKVT370 | Flat flie | Specification: 3 | No.s | 3 |
| 371 | 20GKKVT371 | Flat flie basterd | Specification: 3 | No.s | 3 |
| 372 | 20GKKVT372 | Fuel feed pump for diesel | Specification: 1 | No.s | 1 |
| 373 | 20GKKVT373 | Fuel Injection pump dismentring tool kit/ universal vice | Specification: 1 | No.s | 1 |
| 374 | 20GKKVT374 | Gloves for welding leather asbesteres | Specification: 5 | Set | 5 |
| 375 | 20GKKVT375 | Glowplug tester | Specification: 2 | No.s | 2 |
| 376 | 20GKKVT376 | Grinite surface plate | Specification: 1 | No.s | 1 |
| 377 | 20GKKVT377 | Grease Gun heavy duty trolytype | Specification: 1 | No.s | 1 |
| 378 | 20GKKVT378 | Growler | Specification: 1 | No.s | 1 |
| 379 | 20GKKVT379 | Hacksaw frame adjestable | Specification: 9 | No.s | 9 |
| 380 | 20GKKVT380 | Hammer ball pien 0.75kg | Specification: 4 | No.s | 4 |
| 381 | 20GKKVT381 | Hammer Chipping 0.25 kg | Specification: 5 | No.s | 5 |
| 382 | 20GKKVT382 | Hammer copper | Specification: 3 | No.s | 3 |
| 383 | 20GKKVT383 | Hammer Mallet | Specification: 3 | No.s | 3 |
| 384 | 20GKKVT384 | Hammer Plastic | Specification: 4 | No.s | 4 |
| 385 | 20GKKVT385 | Hand operated Crimpping tool 1)For up to 4 mm 2) For crimpping up to 10 mm | Specification: 2 | Set | 2 |
| 386 | 20GKKVT386 | Hand Shear Universal | Specification: 2 | No.s | 2 |
| 387 | 20GKKVT387 | Insulated Screw driver | Specification: 4 | No.s | 4 |
| 388 | 20GKKVT388 | Insulated Screw driver | Specification: 4 | No.s | 4 |
| 389 | 20GKKVT389 | Left cut snips | Specification: 3 | No.s | 3 |
| 390 | 20GKKVT390 | Magnifyng Glass | Specification: 2 | No.s | 2 |
| 391 | 20GKKVT391 | Marking out tables | Specification: 1 | No.s | 1 |
| 392 | 20GKKVT392 | Multimeter Digital | Specification: 4 | No.s | 4 |
| 393 | 20GKKVT393 | Oil pump for dismenting assembling | Specification: 1 | No.s | 1 |
| 394 | 20GKKVT394 | Philips screw driver set of pices ( 100mm to 300 mm) | Specification: 2 | No.s | 2 |
| 395 | 20GKKVT395 | Pipe Cutting tool | Specification: 2 | No.s | 2 |
| 396 | 20GKKVT396 | Pipe flaring tool | Specification: 2 | No.s | 2 |
| 397 | 20GKKVT397 | piston ring expander & remover | Specification: 2 | No.s | 2 |
| 398 | 20GKKVT398 | Pliers Combuntion 20 cm | Specification: 2 | No.s | 2 |
| 399 | 20GKKVT399 | Pliers round nose | Specification: 1 | No.s | 1 |
| 400 | 20GKKVT400 | Prick Punch | Specification: 3 | No.s | 3 |
| 401 | 20GKKVT401 | Punch letter Number | Specification: 1 | Set | 1 |
| 402 | 20GKKVT402 | Radiator cut section cross flow | Specification: 1 | No.s | 1 |
| 403 | 20GKKVT403 | Radiator cut section down flow | Specification: 1 | No.s | 1 |
| 404 | 20GKKVT404 | Raditor pressure cap | Specification: 2 | No.s | 2 |
| 405 | 20GKKVT405 | Right cut snips | Specification: 1 | No.s | 1 |
| 406 | 20GKKVT406 | Rivert sets snap & dolly combinated | Specification: 2 | No.s | 2 |
| 407 | 20GKKVT407 | Scraper Flat | Specification: 1 | No.s | 1 |
| 408 | 20GKKVT408 | Scraper half round | Specification: 1 | No.s | 1 |
| 409 | 20GKKVT409 | Scraper triongular | Specification: 1 | No.s | 1 |
| 410 | 20GKKVT410 | Scriber | Specification: 1 | No.s | 1 |
| 411 | 20GKKVT411 | Tinnman\s shear | Specification: 2 | No.s | 2 |
| 412 | 20GKKVT412 | Tinnman\s shear | Specification: 4 | No.s | 4 |
| 413 | 20GKKVT413 | Soldring copper Hatchet type | Specification: 1 | No.s | 1 |
| 414 | 20GKKVT414 | Solid parallel in pairs different sizes | Specification: 2 | No.s | 2 |
| 415 | 20GKKVT415 | Spanner Clyburn | Specification: 1 | No.s | 1 |
| 416 | 20GKKVT416 | Spanner D.E Set 12 pieces | Specification: 3 | No.s | 3 |
| 417 | 20GKKVT417 | Spanner T-flocks for screwing up screwing in accessable | Specification: 1 | No.s | 1 |
| 418 | 20GKKVT418 | Spanner ring set o 12 metric sizes | Specification: 3 | No.s | 3 |
| 419 | 20GKKVT419 | Spanner Socket with speed handle T- bar ratchet & universal | Specification: 2 | No.s | 2 |
| 420 | 20GKKVT420 | Spark lighter | Specification: 2 | No.s | 2 |
| 421 | 20GKKVT421 | Spark plug spanner | Specification: 1 | No.s | 1 |
| 422 | 20GKKVT422 | Steel measuring tape | Specification: 4 | No.s | 4 |
| 423 | 20GKKVT423 | Straight Edge Gauge | Specification: 2 | No.s | 2 |
| 424 | 20GKKVT424 | Straight Edge Gauge | Specification: 2 | No.s | 2 |
| 425 | 20GKKVT425 | Stud Extarctor Set of 03 | Specification: 2 | No.s | 2 |
| 426 | 20GKKVT426 | Surface gauge with, dial indicater plug ic-0.01mm type | Specification: 4 | No.s | 4 |
| 427 | 20GKKVT427 | Teliscope Gauge | Specification: 4 | No.s | 4 |
| 428 | 20GKKVT428 | Tendem master cylinder with booster | Specification: 4 | No.s | 4 |
| 429 | 20GKKVT429 | Temperture gauge with sensor | Specification: 2 | No.s | 2 |
| 430 | 20GKKVT430 | Thermostat | Specification: 2 | No.s | 2 |
| 431 | 20GKKVT431 | Thredding pitch gauge Metric | Specification: 1 | No.s | 1 |
| 432 | 20GKKVT432 | Timming lighter | Specification: 1 | No.s | 1 |
| 433 | 20GKKVT433 | Trammel 30 cm | Specification: 1 | No.s | 1 |
| 434 | 20GKKVT434 | Tyre pressure gauge with helding nipple | Specification: 2 | No.s | 2 |
| 435 | 20GKKVT435 | Vaccume gauge to reed 0 to 760 mm of Hg | Specification: 1 | No.s | 1 |
| 436 | 20GKKVT436 | Valve Spring compressor universal | Specification: 1 | No.s | 1 |
| 437 | 20GKKVT437 | Vernier Caliper 0.300 mm with least count 0.02mm | Specification: 3 | No.s | 3 |
| 438 | 20GKKVT438 | Vice grip pliens | Specification: 2 | No.s | 2 |
| 439 | 20GKKVT439 | Water pump for dismanting & assembling | Specification: 3 | No.s | 3 |
| 440 | 20GKKVT440 | Air condition C.R.D.I vechicle in running condition L.M.V | Specification: 1 | No.s | 1 |
| 441 | 20GKKVT441 | Bench lever shears | Specification: 1 | No.s | 1 |
| 442 | 20GKKVT442 | Discrete compounent trainer/Basic Electronic trainer | Specification: 1 | No.s | 1 |
| 443 | 20GKKVT443 | Dual magntization yoke ac/HWDC, 50 Hz | Specification: 1 | Set | 1 |
| 444 | 20GKKVT444 | Gas weelding table | Specification: 2 | No.s | 2 |
| 445 | 20GKKVT445 | Heavy commercial vechicle type(with out body) | Specification: 1 | No.s | 1 |
| 446 | 20GKKVT446 | Hydrolic jack lift type | Specification: 1 | Set | 1 |
| 447 | 20GKKVT447 | Liquid penetrate Inspection kit | Specification: 1 | Set | 1 |
| 448 | 20GKKVT448 | Multi Scan tool with oscilloscope | Specification: 1 | No.s | 1 |
| 449 | 20GKKVT449 | Pipe Bending machine (Hydrolic type) | Specification: 1 | No.s | 1 |
| 450 | 20GKKVT450 | Peumatic rivert gun with stardard accessories | Specification: 2 | No.s | 2 |
| 451 | 20GKKVT451 | Spring tension tester | Specification: 1 | No.s | 1 |
| 452 | 20GKKVT452 | Tin smiths benchfolden | Specification: 1 | No.s | 1 |
| 453 | 20GKKVT453 | Welding plant | Specification: 1 | No.s | 1 |
| 454 | 20GKKVT454 | Weilding transformer | Specification: 1 | No.s | 1 |
| 455 | 20GKKVT455 | Working condition of diesel engine assembly with fault simulufication board | Specification: 1 | No.s | 1 |
| 456 | 20GKKVT456 | White board | Specification: 1 | No.s | 1 |
| 457 | 20GKKVT457 | Instructor laptop with latest (Vista & above configuaration with oprating system & ms office package | Specification: 1 | No.s | 1 |
| 458 | 20GKKVT458 | LCD Projector with screen | Specification: 1 | No.s | 1 |
| 459 | 20GKKVT459 | MEASURING STEEL TAPE | Specification: 26 | No.s | 26 |
| 460 | 20GKKVT460 | COMBINATION PLIER INSULATED | Specification: 10 | No.s | 10 |
| 461 | 20GKKVT461 | SCREW DRIVER INSULATED | Specification: 42 | No.s | 42 |
| 462 | 20GKKVT462 | ELECTRICIAN SCREW DRIVER THIN STEM INSULATED HANDLE | Specification: 8 | No.s | 8 |
| 463 | 20GKKVT463 | HEAVY DUTY SREW DRIVER INSULATED | Specification: 9 | No.s | 9 |
| 464 | 20GKKVT464 | ELECTRICIAN SCREW DRIVER THIN STEM INSULATED HANDLE | Specification: 9 | No.s | 9 |
| 465 | 20GKKVT465 | PUNCH CENTRE | Specification: 9 | No.s | 9 |
| 466 | 20GKKVT466 | KNIFE DOUBLE BLADED ELECTRICIAN | Specification: 9 | No.s | 9 |
| 467 | 20GKKVT467 | NEON TESTER | Specification: 9 | No.s | 9 |
| 468 | 20GKKVT468 | STEEL RULE GRADUATED BOTH IN METRIX & ENGLISH UNIT | Specification: 9 | No.s | 9 |
| 469 | 20GKKVT469 | HAMMER CROSS PEEN WITH HANDLE | Specification: 9 | No.s | 9 |
| 470 | 20GKKVT470 | CRIMPING TOOL | Specification: 7 | No.s | 7 |
| 471 | 20GKKVT471 | DIVIDER | Specification: 2 | No.s | 2 |
| 472 | 20GKKVT472 | GOUGE, WIRE IMPERIAL STAINLESS STEEL MARKED IN SWG | Specification: 2 | No.s | 2 |
| 473 | 20GKKVT473 | PIN TYPE, SHACKE TYPE, EGG TYPE AND SUSPENSION TYPE INSULATORS INCLUDING HARDWARE FITTING | Specification: 2 | Set | 2 |
| 474 | 20GKKVT474 | LABORATERY TYPE INDUCTION COIL | Specification: 1 | No.s | 1 |
| 475 | 20GKKVT475 | EARTH PLATE | Specification: 1 | Set | 1 |
| 476 | 20GKKVT476 | EARTH ELETRODE | Specification: 1 | Set | 1 |
| 477 | 20GKKVT477 | MCCB | Specification: 1 | No.s | 1 |
| 478 | 20GKKVT478 | ELCB & RCCB | Specification: 1 | Set | 1 |
| 479 | 20GKKVT479 | FUSES-5A | Specification: 1 | Set | 1 |
| 480 | 20GKKVT480 | RHEOSTAT (SLIDING TYP) | Specification: 1 | Set | 1 |
| 481 | 20GKKVT481 | VARIOUS LAMPS | Specification: 1 | Set | 1 |
| 482 | 20GKKVT482 | PIANO SWITH | Specification: 2 | No.s | 2 |
| 483 | 20GKKVT483 | UNDER GROUNDING FEEDER CABLE METALIC SHEATED CABLE DIRECT BURRIED CABLE meter | Specification: 1 | Set | 1 |
| 484 | 20GKKVT484 | BUS BAR WITH BRACKETS | Specification: 3 | No.s | 3 |
| 485 | 20GKKVT485 | RUBBER MAT | Specification: 2 | No.s | 2 |
| 486 | 20GKKVT486 | ELETRICIAN HELMET | Specification: 2 | No.s | 2 |
| 487 | 20GKKVT487 | RCC POLE WITH ACCESSORIES (MS ANGLE IRON, \C\ CLAMP STAY INSULATOR ETC) & MATERIALS. | Specification: 1 | Set | 1 |
| 488 | 20GKKVT488 | SAFETY BELT | Specification: 2 | No.s | 2 |
| 489 | 20GKKVT489 | OHM METER. SERIES TYPE x SHUNT TYPE, POTABLE BOX TYPE. | Specification: 2 | Set | 2 |
| 490 | 20GKKVT490 | DIGITAL MULTIMETER | Specification: 4 | No.s | 4 |
| 491 | 20GKKVT491 | AC voltmeter M.I. analong, port able box type housed in Bakelite case | Specification: 2 | No.s | 2 |
| 492 | 20GKKVT492 | Mili voltmeter centre zero analog, potable box type housed in Backelite case | Specification: 1 | No.s | 1 |
| 493 | 20GKKVT493 | Ammeter MC analog portable box type housed in backalite case | Specification: 1 | Set | 1 |
| 494 | 20GKKVT494 | AC Ammeter MI, analog, portable box type housed in backalite case | Specification: 1 | Set | 1 |
| 495 | 20GKKVT495 | Digital wattmeter | Specification: 2 | No.s | 2 |
| 496 | 20GKKVT496 | Ac energy meter | Specification: 1 | No.s | 1 |
| 497 | 20GKKVT497 | Ac energy meter | Specification: 2 | No.s | 2 |
| 498 | 20GKKVT498 | Power factor meter digital | Specification: 2 | No.s | 2 |
| 499 | 20GKKVT499 | Lux meter | Specification: 2 | No.s | 2 |
| 500 | 20GKKVT500 | Tachometer | Specification: 1 | No.s | 1 |
| 501 | 20GKKVT501 | Tong Tester /clamp meter | Specification: 1 | No.s | 1 |
| 502 | 20GKKVT502 | Phase sequence indicator | Specification: 2 | No.s | 2 |
| 503 | 20GKKVT503 | Star delta starter – soft starter | Specification: 1 | No.s | 1 |
| 504 | 20GKKVT504 | a)Electric induction plate | Specification: 1 | No.s | 1 |
| 505 | 20GKKVT505 | g)Mixture & grinder | Specification: 1 | No.s | 1 |
| 506 | 20GKKVT506 | h) washing machine semi Automatic | Specification: 1 | No.s | 1 |
| 507 | 20GKKVT507 | i) Motor pump set | Specification: 1 | No.s | 1 |
| 508 | 20GKKVT508 | Solar panel with battery | Specification: 1 | Set | 1 |
| 509 | 20GKKVT509 | Pentium 1v computer or latest card with necessary drivers etc | Specification: 1 | No.s | 1 |
| 510 | 20GKKVT510 | Synchronous motor with accassories like starter, excitalion arrangaments | Specification: 1 | No.s | 1 |
| 511 | 20GKKVT511 | Single phase transformer, core type, air cooled | Specification: 1 | No.s | 1 |
| 512 | 20GKKVT512 | Diesel Generator set with change over switch, over current breaker and water/ air cooled with armature star – delta connection of AC 3 Phase | Specification: 1 | Set | 1 |
| 513 | 20GKKVT513 | Manual motor coil winding machine | Specification: 1 | No.s | 1 |
| 514 | 20GKKVT514 | Ceiling fan coil wining machine | Specification: 1 | No.s | 1 |
| 515 | 20GKKVT515 | Primary current injection set | Specification: 1 | No.s | 1 |
| 516 | 20GKKVT516 | Shaded pole motor | Specification: 1 | No.s | 1 |
| 517 | 20GKKVT517 | Wiring board | Specification: 1 | No.s | 1 |
| 518 | 20GKKVT518 | Metal Rack | Specification: 2 | No.s | 2 |
| 519 | 20GKKVT519 | Lockers with drawers | Specification: 2 | No.s | 2 |
| 520 | 20GKKVT520 | White board | Specification: 1 | No.s | 1 |
| 521 | 20GKKVT521 | File flat rough double cut | Specification: 48 | No.s | 48 |
| 522 | 20GKKVT522 | File ,half round ,fine double cut | Specification: 32 | No.s | 32 |
| 523 | 20GKKVT523 | File round fine double cut | Specification: 48 | No.s | 48 |
| 524 | 20GKKVT524 | file flat,fine double cut | Specification: 48 | No.s | 48 |
| 525 | 20GKKVT525 | file square, fine double cut | Specification: 42 | No.s | 42 |
| 526 | 20GKKVT526 | File triangular fine double cut | Specification: 52 | No.s | 52 |
| 527 | 20GKKVT527 | Scriber | Specification: 48 | No.s | 48 |
| 528 | 20GKKVT528 | Centre punch | Specification: 48 | No.s | 48 |
| 529 | 20GKKVT529 | Try square | Specification: 50 | No.s | 50 |
| 530 | 20GKKVT530 | Divider spring joint | Specification: 48 | No.s | 48 |
| 531 | 20GKKVT531 | Caliper Spring joint | Specification: 48 | No.s | 48 |
| 532 | 20GKKVT532 | Caliper odd leg,spring joint | Specification: 48 | No.s | 48 |
| 533 | 20GKKVT533 | Hammer ball pin | Specification: 45 | No.s | 45 |
| 534 | 20GKKVT534 | Cold chisel flat and cross cut | Specification: 48 | Set | 48 |
| 535 | 20GKKVT535 | Engineers rule | Specification: 51 | No.s | 51 |
| 536 | 20GKKVT536 | Tape measuring | Specification: 50 | No.s | 50 |
| 537 | 20GKKVT537 | Plier combination insulated | Specification: 50 | No.s | 50 |
| 538 | 20GKKVT538 | pliers long nose | Specification: 50 | No.s | 50 |
| 539 | 20GKKVT539 | pliersflat nose | Specification: 51 | No.s | 51 |
| 540 | 20GKKVT540 | Line Tester | Specification: 36 | No.s | 36 |
| 541 | 20GKKVT541 | Tweezers | Specification: 52 | No.s | 52 |
| 542 | 20GKKVT542 | Surface gauge universal | Specification: 3 | No.s | 3 |
| 543 | 20GKKVT543 | Bench Vice | Specification: 8 | No.s | 8 |
| 544 | 20GKKVT544 | Hack saw tubular metal frame adjustable | Specification: 4 | No.s | 4 |
| 545 | 20GKKVT545 | Snip Sheet metal Straight nose | Specification: 8 | No.s | 8 |
| 546 | 20GKKVT546 | Snip Sheet metal curved nose | Specification: 10 | No.s | 10 |
| 547 | 20GKKVT547 | Anvil | Specification: 1 | No.s | 1 |
| 548 | 20GKKVT548 | Stakes (different Types) | Specification: 1 | Set | 1 |
| 549 | 20GKKVT549 | Tin Smith | Specification: 1 | No.s | 1 |
| 550 | 20GKKVT550 | Wooden mallet /Nylon mallet | Specification: 1 | No.s | 1 |
| 551 | 20GKKVT551 | Round punch | Specification: 5 | Set | 5 |
| 552 | 20GKKVT552 | Tape measuring graduation in mm | Specification: 1 | No.s | 1 |
| 553 | 20GKKVT553 | screw driver ,plastic handle | Specification: 3 | Set | 3 |
| 554 | 20GKKVT554 | Philips screw driver | Specification: 3 | No.s | 3 |
| 555 | 20GKKVT555 | screw driver ,plastic handle | Specification: 1 | Set | 1 |
| 556 | 20GKKVT556 | Soldring iron exchangable copper tip | Specification: 5 | No.s | 5 |
| 557 | 20GKKVT557 | Knife folded stainless steel | Specification: 6 | No.s | 6 |
| 558 | 20GKKVT558 | Rawal pluge tool | Specification: 2 | No.s | 2 |
| 559 | 20GKKVT559 | Fire extinguisher | Specification: 1 | No.s | 1 |
| 560 | 20GKKVT560 | D.E.Spanner | Specification: 5 | No.s | 5 |
| 561 | 20GKKVT561 | Ring spanner | Specification: 5 | No.s | 5 |
| 562 | 20GKKVT562 | Tong close mouth & pick | Specification: 1 | No.s | 1 |
| 563 | 20GKKVT563 | welding table for gas | Specification: 1 | No.s | 1 |
| 564 | 20GKKVT564 | Flaring tool set,single type for tube | Specification: 1 | No.s | 1 |
| 565 | 20GKKVT565 | Swaging tool ,punch type,set of size for tube | Specification: 1 | No.s | 1 |
| 566 | 20GKKVT566 | Bending Spring external type,for copper | Specification: 1 | Set | 1 |
| 567 | 20GKKVT567 | pipe cutter miniature for copper tube | Specification: 1 | Set | 1 |
| 568 | 20GKKVT568 | Pinch of tool ,for copper tube | Specification: 1 | Set | 1 |
| 569 | 20GKKVT569 | Ratchet spanner of | Specification: 1 | Set | 1 |
| 570 | 20GKKVT570 | Capillary pluge gauge | Specification: 3 | No.s | 3 |
| 571 | 20GKKVT571 | Piercing plier & reversing valve with access fitting | Specification: 5 | Set | 5 |
| 572 | 20GKKVT572 | Spanner double ended | Specification: 1 | Set | 1 |
| 573 | 20GKKVT573 | Wrench adjustable | Specification: 1 | No.s | 1 |
| 574 | 20GKKVT574 | Wrench adjustable | Specification: 3 | No.s | 3 |
| 575 | 20GKKVT575 | Valve key handle (Treated as consumable) | Specification: 5 | No.s | 5 |
| 576 | 20GKKVT576 | Scissor ,gasket cutting stainless steel | Specification: 1 | No.s | 1 |
| 577 | 20GKKVT577 | T-Allen key set | Specification: 1 | Set | 1 |
| 578 | 20GKKVT578 | pipe cutter with built in reamer & space cutter, for copper tube | Specification: 4 | No.s | 4 |
| 579 | 20GKKVT579 | Spanner double ended | Specification: 4 | Set | 4 |
| 580 | 20GKKVT580 | pipe wrench | Specification: 5 | Set | 5 |
| 581 | 20GKKVT581 | Hammer ball pin | Specification: 1 | No.s | 1 |
| 582 | 20GKKVT582 | Puller 3 legged with flexible arm | Specification: 5 | No.s | 5 |
| 583 | 20GKKVT583 | Hand blower portable complete | Specification: 1 | No.s | 1 |
| 584 | 20GKKVT584 | Sprit level precision metalic | Specification: 1 | No.s | 1 |
| 585 | 20GKKVT585 | Tap set with matching drill | Specification: 2 | Set | 2 |
| 586 | 20GKKVT586 | Tap set with matching drill | Specification: 2 | Set | 2 |
| 587 | 20GKKVT587 | Refrigerent Cylinder | Specification: 1 | No.s | 1 |
| 588 | 20GKKVT588 | Heating kitt with infrared bulb | Specification: 1 | No.s | 1 |
| 589 | 20GKKVT589 | plumbing Hammer weight | Specification: 1 | No.s | 1 |
| 590 | 20GKKVT590 | piercing valve | Specification: 2 | No.s | 2 |
| 591 | 20GKKVT591 | feeler Gauge | Specification: 2 | No.s | 2 |
| 592 | 20GKKVT592 | Four way reversible valve | Specification: 1 | No.s | 1 |
| 593 | 20GKKVT593 | Pressure Gauge Digital Type | Specification: 5 | No.s | 5 |
| 594 | 20GKKVT594 | Compound gauge Digital type | Specification: 5 | No.s | 5 |
| 595 | 20GKKVT595 | Service man Thermometer in metal case | Specification: 1 | No.s | 1 |
| 596 | 20GKKVT596 | Electronic Leak detector | Specification: 2 | No.s | 2 |
| 597 | 20GKKVT597 | Sling psychrometer mounted on Aluminium back | Specification: 3 | No.s | 3 |
| 598 | 20GKKVT598 | Stop watch | Specification: 1 | No.s | 1 |
| 599 | 20GKKVT599 | Vernier caliper | Specification: 1 | No.s | 1 |
| 600 | 20GKKVT600 | Micron vaccum Gauge | Specification: 2 | No.s | 2 |
| 601 | 20GKKVT601 | Wire guage metric & british | Specification: 1 | No.s | 1 |
| 602 | 20GKKVT602 | Compressors tester for small harmatic compressor | Specification: 1 | No.s | 1 |
| 603 | 20GKKVT603 | Digital Thermometer | Specification: 1 | No.s | 1 |
| 604 | 20GKKVT604 | BLDC motor with controler | Specification: 2 | No.s | 2 |
| 605 | 20GKKVT605 | IDU pulse generation type motor | Specification: 2 | No.s | 2 |
| 606 | 20GKKVT606 | single door direct cool refrigerator carrying with HC | Specification: 1 | No.s | 1 |
| 607 | 20GKKVT607 | core drill machine | Specification: 1 | No.s | 1 |
| 608 | 20GKKVT608 | Evacuating & refrigerent Charging station,consist of A) Rotory two stage vacuum pump & motor (with gas ballest & Anti suck back) B Manifold with gauges & valves & capable of pulling vacuum up to 50 microns of Hg with provision of connecting to a micron level vacuum gauge C ) Graduated charging cylinder with provision for temperature correction & all necessary isolated valves | Specification: 1 | No.s | 1 |
| 609 | 20GKKVT609 | Evacuating &Charging station, as above but fitted with weighing scale | Specification: 1 | No.s | 1 |
| 610 | 20GKKVT610 | Window A/C | Specification: 1 | No.s | 1 |
| 611 | 20GKKVT611 | Split A.C | Specification: 1 | No.s | 1 |
| 612 | 20GKKVT612 | Ductable Split A.C1.5 ton | Specification: 1 | No.s | 1 |
| 613 | 20GKKVT613 | Recovery units with cylinders | Specification: 1 | No.s | 1 |
| 614 | 20GKKVT614 | Decibel meter | Specification: 1 | No.s | 1 |
| 615 | 20GKKVT615 | Cassette Air conditioner | Specification: 1 | No.s | 1 |
| 616 | 20GKKVT616 | De secling pump set | Specification: 1 | No.s | 1 |
| 617 | 20GKKVT617 | Refrigerator Cylinder | Specification: 2 | No.s | 2 |
| 618 | 20GKKVT618 | Guage Manifold with gauges | Specification: 1 | No.s | 1 |
| 619 | 20GKKVT619 | Rotary hermatic compressor | Specification: 1 | No.s | 1 |
| 620 | 20GKKVT620 | Bottle Cooler visible | Specification: 1 | No.s | 1 |
| 621 | 20GKKVT621 | Display cabinet | Specification: 1 | No.s | 1 |
| 622 | 20GKKVT622 | Water cooler storage type | Specification: 1 | No.s | 1 |
| 623 | 20GKKVT623 | water dispenser bubble type (Hot & Cold) | Specification: 1 | No.s | 1 |
| 624 | 20GKKVT624 | Packeg A/C | Specification: 1 | No.s | 1 |
| 625 | 20GKKVT625 | Car A.C Tutorial Model | Specification: 1 | Set | 1 |
| 626 | 20GKKVT626 | Bus AC Tutorial Model | Specification: 1 | Set | 1 |
| 627 | 20GKKVT627 | Automatic ice cube machine | Specification: 1 | No.s | 1 |
| 628 | 20GKKVT628 | Storage type water cooler (hot & cold) | Specification: 1 | No.s | 1 |
| 629 | 20GKKVT629 | VRF/VRV unit with two indoor units | Specification: 1 | No.s | 1 |
| 630 | 20GKKVT630 | split A.C (inverter technology) | Specification: 2 | No.s | 2 |
| 631 | 20GKKVT631 | Absorption System | Specification: 1 | No.s | 1 |
| 632 | 20GKKVT632 | Class room table | Specification: 26 | No.s | 26 |
| 633 | 20GKKVT633 | Work bench | Specification: 6 | No.s | 6 |
| 634 | 20GKKVT634 | Glass board portable | Specification: 1 | No.s | 1 |
| 635 | 20GKKVT635 | Computer Table | Specification: 1 | No.s | 1 |
| 636 | 20GKKVT636 | Computer chair | Specification: 1 | No.s | 1 |
| 637 | 20GKKVT637 | white Board | Specification: 1 | No.s | 1 |
| 638 | 20GKKVT638 | Chart stand | Specification: 1 | No.s | 1 |
| 639 | 20GKKVT639 | Computer with printer & scanner | Specification: 1 | No.s | 1 |
| 640 | 20GKKVT640 | LCD Projector/LED/LCD/TV | Specification: 1 | No.s | 1 |
| 641 | 20GKKVT641 | Laptop | Specification: 1 | No.s | 1 |
| 642 | 20GKKVT642 | UPS | Specification: 1 | No.s | 1 |
| 643 | 20GKKVT643 | COPPIEAR MACHINE | Specification: 1 | No.s | 1 |
| 644 | 20GKKVT644 | INTERACTIVE BOARD | Specification: 1 | No.s | 1 |
| 645 | 20GKKVT645 | Stool | Specification: 26 | No.s | 26 |
| 646 | 20GKKVT646 | Book Self with glass panel | Specification: 1 | No.s | 1 |
| 647 | 20GKKVT647 | storage rack | Specification: 2 | No.s | 2 |
| 648 | 20GKKVT648 | Storage shelf | Specification: 2 | No.s | 2 |
| 649 | 20GKKVT649 | Digital multimeter | Specification: 10 | No.s | 10 |
| 650 | 20GKKVT650 | Tweezer -Bend tip | Specification: 2 | No.s | 2 |
| 651 | 20GKKVT651 | Battery charger | Specification: 1 | No.s | 1 |
| 652 | 20GKKVT652 | Clamp meter | Specification: 2 | No.s | 2 |
| 653 | 20GKKVT653 | Autotransfromer | Specification: 2 | No.s | 2 |
| 654 | 20GKKVT654 | Op Amp trainer | Specification: 2 | No.s | 2 |
| 655 | 20GKKVT655 | Digital and analog bread board trainer | Specification: 6 | No.s | 6 |
| 656 | 20GKKVT656 | POWER ELECTRONICS TRAINER with at least 6 nos of applications Board . MOSFET characteristics , SCR Charateristics, SCR Lamp Flasher, SCR Alarm circiut, Series Inverter, Single Phase PWM Inverter. | Specification: 4 | No.s | 4 |
| 657 | 20GKKVT657 | Computers desktop | Specification: 2 | No.s | 2 |
| 658 | 20GKKVT658 | Laptops | Specification: 1 | No.s | 1 |
| 659 | 20GKKVT659 | DSO(colour) | Specification: 1 | No.s | 1 |
| 660 | 20GKKVT660 | SMD soldering and desoldering station with necessary accessories | Specification: 2 | No.s | 2 |
| 661 | 20GKKVT661 | AC moters Trainer Kit 1/4 hp Motro Single Phase Contactors Relays MCB DOL Starter | Specification: 1 | No.s | 1 |
| 662 | 20GKKVT662 | AM/FM,commerical radio receivers | Specification: 2 | No.s | 2 |
| 663 | 20GKKVT663 | Microcontroller kits (8051)along with programming software (Assembly level programming) | Specification: 4 | No.s | 4 |
| 664 | 20GKKVT664 | Application kits for micro controllers 6 different applications | Specification: 1 | Set | 1 |
| 665 | 20GKKVT665 | Sensor Trainer kit Containing Following sensor 1) Thermocouple, 2) RTD, 3) Load cell/strain Gauge 4) LVDT, 5) Smoke Detector sensors, 6) Speed sensor 7) Limit Switch , 8) Photo sensors 9) Optocouplor 10) Proximity sensor | Specification: 2 | No.s | 2 |
| 666 | 20GKKVT666 | Fiber optic communication Trainer | Specification: 2 | No.s | 2 |
| 667 | 20GKKVT667 | Seven Segment DPM Trainer | Specification: 5 | No.s | 5 |
| 668 | 20GKKVT668 | LCD based DPM | Specification: 6 | No.s | 6 |
| 669 | 20GKKVT669 | SMPS of different make | Specification: 2 | No.s | 2 |
| 670 | 20GKKVT670 | UPS 3KVA with back up time minimum 30min | Specification: 1 | No.s | 1 |
| 671 | 20GKKVT671 | Smart phones of different make(Android) | Specification: 2 | No.s | 2 |
| 672 | 20GKKVT672 | LCD TV(triner kit) | Specification: 1 | No.s | 1 |
| 673 | 20GKKVT673 | LED TV(triner kit) | Specification: 1 | No.s | 1 |
| 674 | 20GKKVT674 | LED TV (21\") | Specification: 2 | No.s | 2 |
| 675 | 20GKKVT675 | Anolog Component Trainer | Specification: 4 | No.s | 4 |
| 676 | 20GKKVT676 | Home theatre system | Specification: 1 | No.s | 1 |
| 677 | 20GKKVT677 | Solar Training Kit /Simulator | Specification: 1 | No.s | 1 |
| 678 | 20GKKVT678 | LED lighting system | Specification: 2 | Set | 2 |
| 679 | 20GKKVT679 | Metal Rack | Specification: 2 | No.s | 2 |
| 680 | 20GKKVT680 | White Board | Specification: 1 | No.s | 1 |
| 681 | 20GKKVT681 | Bio metric Machine adhar based latest with GPRS | Specification: 1 | No.s | 1 |
| 682 | 20GKKVT682 | ZEROX Machine | Specification: 2 | No.s | 2 |
| 683 | 20GKKVT683 | Printer with scanner | Specification: 2 | No.s | 2 |
| 684 | 20GKKVT684 | Computers desktop | Specification: 2 | No.s | 2 |
| 685 | 20GKKVT685 | Computer Table | Specification: 1 | No.s | 1 |
| 686 | 20GKKVT686 | Celing fan | Specification: 5 | No.s | 5 |
| 687 | 20GKKVT687 | Steel Almera | Specification: 5 | No.s | 5 |
| 688 | 20GKKVT688 | Lockes | Specification: 10 | No.s | 10 |
| 689 | 20GKKVT689 | Lockes | Specification: 5 | No.s | 5 |
| 690 | 20GKKVT690 | Pedastal Fan | Specification: 3 | No.s | 3 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
