Rate Contract Of Iron & Aluminum Materials-Sikkim

Rate Contract Of Iron & Aluminum Materials:- 1 MS 100 X 100 mm square pipe ( 3.6mm thickness) 2 MS 75 X 75 mm Square Pipe (3.6mm Thickness ) 3 MS 50x50 mm square pipe (3.6 mm thickness) 4 MS 40x40 mm square pipe (3.6 mm thickness) 5 MS 25x25 mm square pipe (3.6mm thickness) 6 MS 12 mm square bar. 7 M.S 50 X 50 mm L Channel ( Angle) with 3.6 mm thickness 8 M.S 40 X 40 mm L Channel ( Angle) with 3.6 mm thickness 9 M.S 25 X 25 mm L Channel ( Angle) with 2.5 mm thickness 10 MS 40 mm T Channel with 2.8mm thickness. 11 1 Inch MS T Channel. 12 MS Z section 19 mm with 3mm thickness. 13 MS Mullion (F Channel) 40 mm, 2.5 mm thickness 14 1 Inch M.S Strip Thickness 6 mm. 15 G.I plain Sheet without colour coating ( 0.62 mm Thick & 4 wide ) Make J.S.W 16 G.I plain Sheet with green colour coating ( thickness 0.45mm - 0.62 mm ) Make J.S.W 17 MS 6 mm CRCA without coating (Size 8ft X 4ft) 18 MS 8 mm CRCA without coating (Size 8ft X 4ft) 19 MS 6 mm CRCA without coating (Size 10ft X 5ft) Note: a) The items may be procured in any combination of above list of items. b) The approximate Value of requirement during the period of rate contract is Rs.12 lakhs. However the same may increase or decrease based on the need of the institute. c) The items may be procured in batches based on the requirement of the institute. 20 MS 8 mm CRCA without coating (Size 10ft X 5ft) 21 MS steel plate with anti-slippery embossing surface (Chequered Plate) 6 mm without coating (Size 8ft X 4ft) 22 MS steel plate with anti slippery embossing surface (Chequered Plate) 6 mm (Size 10ft X 5ft) 23 MS steel plate with anti slippery embossing surface (Chequered Plate) 8 mm without coating (Size 8ft X 4ft) 24 MS steel plate with anti slippery embossing surface (Chequered Plate) 8 mm (Size 10ft X 5ft) 25 Aluminum sheet 0.5mm thick (4 wide) 26 Aluminum sheet 0.3mm thick (4 wide) 27 TMT bar 6mm (Make-JSW/ Tata) 28 TMT bar 8 mm (Make-JSW/ Tata) 29 TMT bar 10 mm (Make-JSW/ Tata) 30 TMT bar 12 mm (Make-JSW/ Tata) 31 TMT bar 16 mm (Make-JSW/ Tata)

INR 500 /-

Refer document

Refer document