Tender For Miscellaneous Works In Immunogenomics, Stl2 And Erstwhile Stl1 Lab At Nii - 01. Fabrication of lab sink table of size 40” x27” x36” made of 1” x1” MS square tubular pipe frame, 19mm thick commercial board, 6mm thick commercial ply, P & F 1 mm thick laminate over exposed portion, teak wood edging , 18mm thick polished granite stone top with smooth finish edges with 1” granite strip border having two shutter, two one way heavy duty tap (Vijay make) with one foot control valve, 18”x24”x10” stainless steel sink (Neelkanth/Jayna ) and complete with all hardware and painting polishing work etc. as required. (Bottom side of leg should contain height adjuster) 02. Providing and fixing 4mm thick acrylic sheet as approved, fixing with screws, silicon etc. as required. 03. Fabrication and fixing of wooden racks having 18” depth made of 19mm thick commercial board/wood ply, 6mm thick commercial ply, 1mm thick laminate fixing out side,0.8mm thick laminate fixing inside the rack, teak wood edging having four openable shutters and complete with all hardware hinges, locks, handles, magnetic catchers etc. and painting/polishing work as required. 04. Fabrication of lab table of size 60 x32”x36” made of 1” x1” MS square tubular pipe frame, 19mm thick commercial board, teak wood edging , 18mm thick polished granite stone top with smooth finish edges and complete with all hardware and painting polishing work etc. as required. (Bottom side of leg should contain height adjuster) 05. Fabrication of wooden cabinets on wheel of size 18”x30”x24” made of 19mm thick commercial board, 6mm thick commercial ply, 1mm thick laminate fixing out side,0.8mm thick laminate fixing inside the cabinet, teak wood edging having one openable shutter, two drawers, drawer run on telescopic channels and complete with all hardware hinges, locks, handles, magnetic catchers etc. and painting/polishing work as required. 06. Modification and repairing of existing four lab tables with provision and fixing of new sliding drawer telescopic channels, P/F new laminate sheet front of the drawers, cleaning the existing laminate and complete with polishing work etc. as required. 07. Fabrication of wooden almirah of size 24” depth made of 19mm thick commercial board, 6mm thick commercial ply, 1mm thick laminate fixing out side,0.8mm thick laminate fixing inside , teak wood edging having two openable shutters, two shelves and complete with all hardware hinges, locks, handles, magnetic catchers etc. and painting/polishing work as required. 08. Providing and fixing 1mm thick chemical resistant laminate ( Merino) 8X4 with P & F 6 mm thick commercial ply fixing on existing lab tables including wastage as per site requirement etc. 09. Fabrication of teak wood L- shape table of size (72”+60”)30”made of 19mm thick commercial board, 6mm thick commercial ply, 3mm thick teak ply fixing on exposed portion teak wood edging having drawers, shutters, shelves as required and complete with all hardware hinges, locks, handles, magnetic catchers etc. and painting/polishing work as required. 10. Providing and fixing wooden shelves made of 19 mm thick commercial board, 1mm thick laminate fixing on both side of the shelves, teak wood edging, shelves fixing on wall with MS brackets (Fly rail) and complete as required. 11. Providing and fixing wooden raceway of approved dimensions made of 12mm thick commercial plywood from all sides except the front side which is made of 6mm thick plywood i/c pasting/covering the three side surface with laminate sheet. Providing appropriate cut out section for mounting switches/sockets, installing the raceway on wall/aluminium section, painting the exposed surface with matching paint complete as required. 12. Providing and fixing homogeneous polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacture like Dunlop S-758, Fevicol SR 998 or equivalent all complete in approved colour and shade, 1.6 mm thick sheet LG Hausys make.
