SHOCK BAR GUIDE(RAPPING SIDE) FOR # 6 ESP, CPP, NALCO.\nESP MODEL:2 X FAA-6 X 37.5-114-135-2\nMOC - IS 2062
31601014790
10
EA
2
2
PINWHEEL SMALL (10 NO OF PINS PER WHEEL) ALONG WITH MATCHING THRUST BEARING AND PAD FOR UNIT-6 ESP, CPP, NALCO.\nESP MODEL - 2 X FAA - 6 X 37.5 - 114 - 135 - 2\nMOC OF PIN - EN 36 B\nMOC OF THRUST BEARING AND PAD - EN 8D\n
31601021530
20
EA
3
3
COMPLETE GRIP COUPLING FOR THE EMITTING RAPPING SYSTEM OF UNIT-6 ESP, CPP, NALCO. ESP MODEL - 2 X FAA - 6 X 37.5 - 114 - 135 - 2\nARM MOC - IS 2062, HUB MOC - EN 8D\n
31601020030
3
EA
4
4
COMPLETE EMITTING RAPPING SHAFT (VERT) WITH KEYS AND SLEEVES FOR UNIT-6 ESP, CPP, NALCO.\nESP MODEL - 2 X FAA - 6 X 37.5 - 114 - 135 - 2\nSHAFT MOC - EN 8D, SLEEVE MOC - SA 106\n
31601023600
2
EA
5
5
SPLIT TYPE BEARING BUSHING FOR EMITTING RAPPING SHAFTS OF UNIT-6 ESP, CPP, NALCO.\n1 SET - 2 HALVES\nESP MODEL - 2 X FAA - 6 X 37.5 - 114 - 135 - 2\nMATERIAL-IS 210 FG 260, SIZE-ID-40MM,OD-70MM HEIGHT-55MM.
31601025530
30
ST
6
6
SPLIT SET RING (IN TWO HALVES WITH GRUB SCREWS AT TWO ENDS) 50 FOR UNIT-7 ESP, CPP, NALCO\n1 SET - 2 HALVES WITH TWO GRUB SCREWS IN FITTED CONDITION\nESP MODEL - 2 X FAA - 6 X 45 - 132 - 135 - 2\nSET RING MOC - EN 8D
31601700660
50
EA
7
7
SHAFT SLEEVES FOR COLLECTING RAPPING SYSTEM OF UNIT-7 ESP, CPP, NALCO.\nESP MODEL - 2 X FAA - 6 X 45 - 132 - 135 - 2\nSLEEVE MOC - SA 106\n
31601700730
50
EA
8
8
SHOCK BAR ASSY IN READY TO FIT CONDITION FOR # 7 & 8 ESP, CPP, NALCO.\n\n[1 EA - 1 NO OF ANGLE (WITH DRILLED HOLES OF REQUIRED SIZE AT REQUIRED PLACES) AND 6 NOS. OF PUNCHED WASHER)], MOC: IS 2062.\n\nESP MODEL:2FAA-6X45-132-135-2
31601701540
30
EA
9
9
SHOCK BAR ASSY WITH ANVIL & HT FASTENERS, FOR ESP MODEL- 2 FAA-7X45M-116-150-2, UNIT -9 & 10. 120MW CPP NALCO.\nONE SET OF CONSISTS OF\n1. SHOCK BAR-1NO\n2. ANVIL-1NO\n3. BOLT & NUT FOR ANVIL-2NOS GR.8.8.\n4. BOTL & NUT FOR CE-1 SET-2 NOS GR.8.8\n5. SPRING WASHER ONE SET.\nSHOCK BAR MOC - IS 2062, ANVIL MOC - EN 8\n
31601900070
20
SET
10
10
NNER ARM ASSEMBLY WITH HT FASTENERS (SIZE - M16 X 45 GR 8.8) FOR CRM OF ESP UNIT-9 & 10, CPP, NALCO.\nESP MODEL- 2 FAA-7X45M-116-150-2\nINNER ARM MOC: IS 2062\n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
