Supply Of Piping Non Ibr (Fire Hydrant), HOCL, AMBALAMUGAL-Kerala

Supply Of Piping Non Ibr ( Fire Hydrant ) , Laying Of Pipe Line-Cs ( Non-Ibr Grade ) As Per The Scope Of Work . , Welding Of Pipe Joints-Cs ( Non-Ibr Grade ) As Per The Scope Of Work . , Flange Bolting Boxing Up Cs ( Non-Ibr Grade ) As Per The Scope Of Work . , Fabrication Mitre Bends / Tees Cs ( Non-Ibr Grade ) As Per The Scope Of Work . , Dismantling Of Cs Lines - Dismantling Of All Types Of Pipe Lines From Different Locations In The Plant At Different Elevation , Salvaging The Flanges And Valves Etc . And Segregating The Balance Material To Dispose At Hocs Scrapyard As Per Scope Of Work And Instruction From Engineer-In-Charge . , Providing Wraping And Coating With Departmental Materials On The Pipeline . Scope Including Cleaning The Pipe Line Using Non Sparking Chisel And Wire Brush , Appling The Primer After Melting The Same In Two Coats By Suitable Brush , Heating Both Pipe And Coating Material Using Blow Lamp And Wrap The Pipeline With The Tape Tightly Without Air Gap , Transportation Of Wraping Materials From Stroes To Site , Preparation Of Material As Per Instruction Of Engineer-In-Charge . , Fabrication Of Reducer 400Mmx300mm From Cs Pipe With Standard Length As Per Instruction Of Engineer-In-Charge And As Per Scope Of Work . , Fabrication Of Reducer 300Mm X 250Mm From Cs Pipe With Standard Length As Per Instruction Of Engineer-In-Charge And As Per Scope Of Work . , Fabrication Of Reducer 300Mmx200mm From Cs Pipe With Standard Length As Per Instruction Of Engineer-In-Charge And As Per Scope Of Work . , Pipe Supports / Saddles - Fabrication And Erection Of Pipe Support , Full Welded With Pad Plate , Shoes , Clamps , Saddles Etc . Of All Types And Supply Of All Neceessary Equipments , Consumabless And Completing Work As Per Standard Specification As Per Scope Of Work And Instruction Of Engineer-In-Charge . , Excavation Of All Types Earth Using Machineries ( Jcb ) Or By Manual Method ( In Case Of Safety Limitations Due To Under Ground Cables / Other Pipe Lines Etc . ) , At A Width Up To 1 . 5 Meter And Up To Required Depth To Facilitate Removal Of Existing Fire Water Lines , De-Watering If Required Manually Or Using Pumps , And Supply And Paving Of Crusher Sand ( M-Sand ) Throuh Out The Length And Width Of Trench For A Thickness Of Minimum 50 . 00 Mm , Backfilling After Laying Of New Fire Water Lines , Levelling , Watering , Ramming And Disposal Of Excess Earth As Per Instruction Of Engineer-In-Charge By Proving All Labour , Machineries , Manual Tools & Tackles As Per Scope Of Work .

Refer document

INR 15800.0 /-

Refer document