| 1 | 1.01 | Supply of submersible pump set fitted with dynamically balanced SS impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 HP, Speed 2870 RPM suitable for operation of 3 phase, 415 volt, 50 Hz, AC supply with efficiency 70% at following duty point:\n175 LPM on 103Mtr. Head.\nHaving discharge outlet 50 mm and outside dia 142 mm.\nMake: BS/SKOPE/CG./KSB/SU/any DJB approved make\n | item1 | 1 | No. |
|---|
| 2 | 2 | Supply of fabricated of hut type electrical feeder pillar/ metal board of welded construction, Fabricated with 50 mm x 50 mm x 6 mm angle iron frame & 16 SWG, M.S. Sheet with horizontal & vertical intermediate chamber of suitable size i.e 1370 mm x 760 mm x 460 mm with arrangement for mounting of switch gears & electrical energy meter painting having following items fitted. (A) MCCB 63Amp.,4 Pole,415Volts,35kv-1No\n Make: Havells/L&T,\n(B) RCCB 63Amp 4 Pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100mA-1 Make: Havells/L&T,\n(C) Fully automatic star delta starter of relay range 13-21 Amp.(7.5HP to 15HP) 3Phase oil immersed type-1 No,\n Make: Bentax/Capital\n(D) Ampere meter 96 mm x 96 mm square shape of 0-30 ampere range. - 1No.\n Make: AE/Capital. \n(E) Volt meter 96 mm x 96 mm square shape of 0-500 volt – 1 No.. \n Make: AE/Capital\n(F) Indicating lamp (A set of three lamps)- 1 set,\nShunt capacitor of 5 KVAR. - 1 No. \n Make: Asian/ Standard. \n(G) selector switch for volt meter -1 No.,\n Make: Kaycee,\n(H) S/O motor protection assembly with earth leakage protection, phase sequence corrector, single phasing protection, overload protection, high voltage/ low voltage time delay power on programmable time switches i.e, RYB phase & facility to change over from automatic manual & vice versa upto 15 HP - 1 No.,\n Make: Gain Guard/ Hi Tech., \nComplete wiring & installation of electrical accessories with required copper conductor wire & thimbles etc.- 1 Job\nComplete 1 Job.\n | item2 | 1 | No. |
|---|
| 3 | 2.99 | Supply of PVC insulated PVC sheathed copper conductor flat cable size 3 core X 4sq mm,1100 volts, confirming to IS 694(each roll 100mtr long). Make: Havells/Finolex/KEI/ any DJB approved make | item3 | 2 | Rolls |
|---|
| 4 | 3.98 | Supply of M.S. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, M.S. plate for holding the pipe of 50 mm dia. | item4 | 1 | No. |
|---|
| 5 | 4.97 | Supply of Double flange GI Column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with GI flange on both ends and welded support in both flange with slot of submersible cable. Make: TATA/ Jindal. | item5 | 30 | No. |
|---|
| 6 | 5.96 | Supply of Tail piece of the medium class GI Pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of GI pipe 50 mm dia. | item6 | 1 | No. |
|---|
| 7 | 6.95 | Supply of GI 90° Bend of size 50 mm dia having both side flange (heavy duty). | item7 | 1 | No. |
|---|
| 8 | 7.94 | Supply of nut bolts, 1/2 “dia 1 ½” long full threaded. | item8 | 7 | Kg. |
|---|
| 9 | 8.93 | Supply of rubber packing for 50 mm dia flange. | item9 | 30 | No. |
|---|
| 10 | 9.92 | Supply of MS bore cover approx, size 8” dia made outlet from 6 mm thick M.S. sheet in 2 halves & circular hole will be in centre of 2”-2 ½” dia with locking arrangement by nut bolts. | item10 | 1 | No. |
|---|
| 11 | 10.91 | Supply of transformer oil. Make: Savita/ Power. | item11 | 5 | Ltr. |
|---|
| 12 | 11.9 | Supply of 50 mm dia non return valve design std. IS 5312 part I PN-1.0 having CI body bronze wedge rings SS spindle drilled flanged type as per IS 1538 table 4&6 with pressure rating class I. Make: Kirloskar /IVC | item12 | 1 | No. |
|---|
| 13 | 12.89 | Installation & commissioning of submersible P/set with proper fitting of 50 mm double flange pipes, along with sluice valve, NRV and other items. All tools & tackles & safety measures taken by contractors and testing the sub. p/set on no load/on load | item13 | 1 | Job |
|---|
| 14 | 13.88 | Earthing with G.I earth pipe 4.5 meter Long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (DSR E&M 2018)5.2 | item14 | 2 | No. |
|---|
| 15 | 14.87 | Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthling as required. (DSR E&M 2018)5.16 | item15 | 10 | Mtr. |
|---|
