| 1 | 1 | Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water etc. | | 1000 | Sqm |
|---|
| 2 | 2 | Dismantling of fencing wiremesh of any type or any description, complete all as specified and directed. | | 650 | Sqm |
|---|
| 3 | 3 | Dismantling of Fencing Posts, strut (Wood or Steel or RCC) etc. of any section including taking out embeded in concrete, brick and masonary portion and making good disturbed surface, complete all as specified and directed. | | 400 | RM |
|---|
| 4 | 4 | Demolition of brick work built in cement mortar,PCC bed blocks of mild steel posts, PCC coping/RCC Jalli etc complete all as specified and directed. | | 30 | Cum |
|---|
| 5 | 5 | Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level. | | 52 | Cum |
|---|
| 6 | 6 | M&L for Brick Work in CM 1:6 with Sub Class 'B' Bricks, using old size bricks, straight or curved on plan exc 6Mtr mean radius all as specified and directed. | | 24 | Cum |
|---|
| 7 | 7 | M&L for Brick Work in CM 1:6 with Sub Class 'B' Bricks, using old size bricks straight or curved on plan exc 6 mtr mean radius but except brick all as specified and directed . | | 5 | Cum |
|---|
| 8 | 8 | M&L for Brick Work in CM 1:4 with Sub Class 'B' Bricks, using old size bricks, straight or curved on plan any radius in half brick thick walls all as specified and directed. | | 10 | Sqm |
|---|
| 9 | 9 | M&L for 15 mm thick rendering in CM 1:6 on any faces of brick wall finished even and fair without using extra cement. | | 1250 | Sqm |
|---|
| 10 | 10 | S&F framed work, such as grills, gratings, steel post and struts in fencing incl drilling holes, notching for wire etc, including straining bolts, hold fasts, wall ties, clamps angle iron etc with end bar shouldered and / or riveted or forged into spike, framed guard bars, railing, frame work and similar work conforming to Fe - 410-O , Fe- 310-O or FE 290,complete all as specified and directed. | | 2320 | Kg |
|---|
| 11 | 11 | S&F MS round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and welding if necessary.\n | | 800 | Kg |
|---|
| 12 | 12 | S&F in repairs galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or tying at crosses with and provision of galvanized mild steel wire. | | 30 | 100 RM |
|---|
| 13 | 13 | Dismantling and refixing only galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbes at 75mm spacings and straining and fixing to any type of standard rails including securing or taying at croses with and provision of galvanized mild steel wire. | | 2 | 100 RM |
|---|
| 14 | 14 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in filling, foundation and mass concrete complete all as specified and directed by Engr-in-charge. | | 18 | Cum |
|---|
| 15 | 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing rubbish off the premises | | 93 | Sqm |
|---|
| 16 | 16 | M&L for 10mm thick rendering in CM 1:4 finished even and fair to receive other treatment as tiles/ etc. | | 93 | Sqm |
|---|
| 17 | 17 | M&L for glazed ceramic joint less coloured/Stone finish/digital/printed/High lighter tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified & directed by Engr-in-Charge. | | 93 | Sqm |
|---|
| 18 | 18 | Preparation of old finished surface including brooming down or steel wire brushing scraping down smoke soot moulds, mass and efforescent salts and trading oil and greasy spots and applying two coat of cement base paint complete as on walls. | | 12095 | Sqm |
|---|
| 19 | 19 | Preparation of old steel surface including brooming down or steel wire brushing scraping down smoke soot moulds, mass and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint. | | 1500 | Sqm |
|---|
| 20 | 20 | Preparation of new plastered surface and applying two coat of cement base paint including one coat of primer complete. | | 1250 | Sqm |
|---|
| 21 | 21 | Preparation of new steel surface of any description exc. 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide. | | 150 | Sqm |
|---|
| 22 | 22 | M & L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor 75mm thick or as specified or as directed. | | 350 | Sqm |
|---|
| 23 | 23 | M&L for precast cement concrete 1:2:4 type B-1 as in copings, kerb blocks, apex stones, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:6 complete with joints to match.\n | | 7 | Cum |
|---|
| 24 | 24 | M & L for cement concrete tile 30 cm x 30cm x 25 mm thick machine pressed set and jointed and pointed in neat cement slurry in floors with grey cement and pigment as reqd (coloured made in PVC mould with vibration process) prelaminated for glossy finish over 15 mm thick screed bed in CM 1:4 all as directed by Engr -in charge. | | 350 | Sqm |
|---|
| 25 | 25 | Dismantling structural steel work including doors gates, grills but excluding framed truss etc. | | 6.5 | Qtl |
|---|
| 26 | 26 | S&F MS framed work such as doors, gates, road sign board, of angle or other section, with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete work confirming to FE- 410 ,Gde E-250. | | 350 | Kg |
|---|
| 27 | 27 | S&F 0.80 mm thick MS plain, black sheet in wall cladding, steel gates and similar work, cut to size, welded/holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required\n | | 50 | Sqm |
|---|
| 28 | 28 | M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. | | 3.2 | Cum |
|---|
| 29 | 29 | M & L for broken glass coping on top of wall in CM 1:3 including 20mm thick cement rendering complete all as spd and directed. | | 10 | Sqm |
|---|
| 30 | 30 | M&L for Providing precast RCC Jalli 35 mm thick(Measured solid), including all moulding type B-0 1:2:4 using 12.5mm graded stone aggregate set in cement mortar 1:4 complete all as specified and directed. (Note : Demolition will be measured with demolition of brick work) | | 50 | Sqm |
|---|
| 31 | 31 | Fixing only framed work in doors or gates in angle or other section with gusset plates, rails, braces etc complete drilling for fixing and steel sheeting or other covering etc conforming to fe-290 Gde E-165 complete all as specified and directed. (Old gate refixed after welding pintol hinges/bottom roller/locking arrangement if reqd, easing etc) Note : New material if any will be measured and paid seperately by weight. | | 200 | Kg |
|---|
| 32 | 32 | Cutting, cleaning,surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep in any type of soil and getting out and removing spoil/earth, bushes, grass etc (upto a distance of 1.5 KM) along fencing/boundry wall/path/road all as specified and directed. | | 2200 | Sqm |
|---|
| 33 | 33 | M & L for preparation old treated surfaces of stone,concrete, asbestos cement or plaster surfaces over 10 cm girth or width, not otherwise described for and applying one coat of syntheic enamel paint etc. complete . | | 300 | Sqm |
|---|
| 34 | 34 | S & F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade all as specified. | | 160 | Sqm |
|---|
| 35 | 35 | M&L for 25 mm sand filling under floors in foundations including watering and consolidation. | | 4 | Cum |
|---|
| 36 | 36 | S&F mild steel screw bolts with haxagonal or squre heads at one end and screwed at other end fitted with washers and one hexagonal nut n exe 5 cm long and 12 mm dia. | | 100 | Kg |
|---|
| 37 | 37 | Supply only chain link MS galvanised fencing any size or type complete all as specified | | 800 | Kg |
|---|
| 38 | 38 | Fixing only chain link fencing including line wires any type of mesh size or type including provision of necessary binding wire etc complete. | | 650 | Sqm |
|---|
| 39 | 39 | Notes :- \n(a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 38,500.00). \n(b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249)\nThe performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder within 28 days from the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249\n | | | |
|---|
