| 1 | 1 | Supply, installation and commissiong of sword type decorative octagonal double arm street light pole by making new RCC foundation suitable for 8 mtr GI octagonal pole as per desgin derived from strctural calculation considering SBC as 10T per sq mtr and basic wind speed as 50mtr/sec. All materils required for makeing the foundation and nut bolts for errection of pole shall be under the scope of the contractor.Loop in , loop out and Termination of cables at GI Octagonal poles shall be under the scope of the party. Detailed technical specification of poles shall be as per the Annexure-II. | 1 | 35 | NO |
|---|
| 2 | 2 | Supply and installation of complete chemical earthing system, making of earth pits including excavation in hard soil of size 10 ft. X 2 ft. X 2 ft. Or 6\"dia x10 feet depth drill hole, resurfacing with black cotton soil, including supply of high conductive rust free copper coated earth electrode, special earth enhancement compound (minimum 50 kg), electrode clamp, copper strip for connection between earth pit and equipment, complete with brick chamber and RCC cover.(Make-Erico, OBO Betterman. | 2 | 8 | EACH |
|---|
| 3 | 3 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess or excavated trench for loop earthinh / continius earth | 3 | 1500 | MR |
|---|
| 4 | 4 | Supply of 4C x 16 Sqmm Stranded Aluminium conductor, HR PVC (Type:C to IS:5831) colour coded (Red, Yellow, Blue, Black), Cores laid up, Inner sheath of extruded HR PVC (Type:ST-2) Galvanised steel round wire armoured HR PVC (Type:ST-2) outer sheathed cable suitable for 1.1KV grade conforming to IS:1554/P-1/88. The size and length of the cable shall be embossed on the outer sheath of the cable at every meter length | 4 | 1500 | MR |
|---|
| 5 | 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, brick protective covering and refilling the trench etc. as required (UP TO 35 sqmm) | 5 | 1500 | MR |
|---|
| 6 | 6 | Supply of RCC poles of height 09 meters and shall be suitable for carrying AB cable | 6 | 35 | EACH |
|---|
| 7 | 7 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc. as required. (ABOVE 08 METER ANS UP TO 11 METER) | 7 | 35 | EACH |
|---|
| 8 | 8 | Supply of Aerial bundelled cable of Size 3x16+25sqmm | 8 | 1500 | MR |
|---|
| 9 | 9 | Laying and fixing of pvec insulated AB cable over the poles hard wares such as hooks / hook clamps required for laying and fixing of AB cable shall be under the scope of the party | 9 | 1500 | MR |
|---|
| 10 | 10 | Supplying and fixing of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and FINISH PAINT AS REQUIRED | 10 | 35 | EACH |
|---|
| 11 | 11 | Supply and instalation and testing of LED street light fitting of 90W with complete set with pressure die cast Aluminioum houseing with IP66 protection (STREET LIGHT FITTINGS AHALL BE SUPPLIED BY NALCO AS FIM) | 11 | 130 | EACH |
|---|
| 12 | 12 | Supply and laying of 3Cx2.5 Sqmm PVC sheeted copper flexible cable inside octagonal GI poles and from AB cable to street light fitting through the pre installed GI bracket | 12 | 1200 | MR |
|---|
| 13 | 13 | Supply and installation of out door type , weather proof timer controlled feeder pamel with provision for auto / manual selection with by pass arrangement as per specification.This includes: a) Incoming: 1 No 63-A 4P MCB type isolator followed by 1 No 70-A 3P AC3 duty power contactor. b) 1 No progrmmeable astro timer switch. c) 1 No Bypass toggle switch. d) Outgoing: 9 Nos. 25-A 2P MCB. | 13 | 2 | NO |
|---|
