Name of Work: Procurement of Security Related Stores / Itmes
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
CGI Sheet 10’ Long. Supply of corrugated galvanized sheet of size 3050 mm (long) x 810 mm (wide) and 0.63 mm thick galvanized coating of 120 gsm as per IS:277-2003. Tolerance will be as per IS Code 277-2003. (Delivery at Badgam) (J &K).
item1
500
Nos
2
2
HDPE laminated sand bags. HDPE laminated sand bags of size 75 x 40cm, sand colour and each bag having weight not less than 75 gms (Delivery at Badgam) (J &K).
item2
100000
Nos
3
3
Punched Tape Concertina Coil. Punched Tape Concertina Coil (including spike and handle) with 50 turns and dia 1050 mm, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6 ± 0.035 mm dia) are electro galvanized to provide protection against out door exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil; steel clips “total 129 Nos per coil equally spaced” to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19 mm and spacing of blades 24.00 ± 0.5 mm C/C. The weight of each coil will be 15.2 ± 5% Kgs without packing material and coil length 15 mtr when opened up with an effective height of 915 mm. Each coil wound with bituminous Hessian cloth for providing protective packing. Punched Tape Concertina Coil 1A shall confirm to CQA, EE, Pune specifications No : CQAE/5660/1602/a and controllerate of quality assurance of Engg. Equipment, PUNE drawing No IMGA-0112/B (Sheet 1 of 2), IMGA – 0112/ C(Sheet 2 of 2), IMPD – 1817/B, IMPD – 1820, IMPD – 1821/B and IMPD – 1822/B. All specification and brief as per Request For Proposal. (Delivery at Badgam) (J &K).
item3
1000
Nos
4
4
MS binding wire (Annealed) not less than 0.9 dia confirming to IS 270-1978 (Delivery at Badgam) (J &K).
item4
90
Kgs
5
5
Galvanised Steel Barbed Wire. Galvanised Steel Barbed Wire, ISI marked A-5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278 – 1978. The barbed wire shall consist of two line wire 2.24 mm dia (Tensile strength 390 – 590 N/mm2 minimum breaking load of complete barbed wire 3KN), one or both containing 2.00 mm dia barbs at 75 mm centre to centre and weighing 97 to 106 Kg per Km. The barbs shall have a length of not less than 13 mm and not more than 18 mm. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanised. The line wire shall be in continuous length and shall not contain any welds other than those in the rod before it is drawn. The galvanising shall conform to the requirement as laid down for light – coated wire of IS 4826 – 1968 `Specification for galvanised coating on round steel wires. Barbing wire(line) shall be hard type heavy coated (230 gm/sqm) and barbing wire (point) shall be hard type light coated (70 gm/sq m). The Galvanised barbed wire will be in bundles of 25 to 30 Kgs each and the bundles will be packed in hessian cloth, the bundles should be strong enough to withstand rough handling during transportation. Every reel of barbed wire shall be marked legibly with BIS standard make the name of manufacturer, the type of barbed wire, the diameter of the line and point wires, barb spacing and length and/or mass of the reel. \n(Delivery at Badgam) (J &K).
item5
4000
Kg
6
6
LAIP 3660mm Long. Supply of Long Angle Iron Picket of size 50 x 50 x 6mm and 3660mm long conforming to IS 2062-2011 (Make TATA/SAIL/Jindal). LAIP made of structural steel angle section grade E-250, type a designation Fe-410W of IS: 2062:2006 \n(Delivery at Badgam) (J &K).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
