Term Contract For Purchase Of Furniture Items1 Operation Theatre Table Nmechanical Or Hydraulic Operation; Must Have Radio Lucent Top, 180 To 200 Cm Length And 50-80 Cm Wide With Radio Lucent Mattress; Must Have A Provision To Include X-Ray Plate Below And Provision For Trendelenburg And Lateral Tilt Of 30-40 Degrees, An Elevation Of 70 To 120 Cm And Should Be On Castors With Brake Supporters And Should Have A Head And Back Section And Kidney Position Break With Two Arm Boards And Scapular And Arm Support For Thoracic Operations. Details Of Accessories Should Be Provided. Complete Accessories For Thyroid, Urologic, Thoracic, Jack-Knife, Trendelenburg- Lithotomy Positions Preferably With Gel Pads For Head Rests And Pressure Points. N 2 Minor O.T. Table N* Three Folding With Adjustable Head And Foot Rest. N* Size: 180Cms Long X 50Cms Wide X 80Cms High ( 72” X 20” X 32” ) . N* The Central Section Should Be Adjustable For Trendelenberg Positions. N* Material Body – Stainless Steel. N* Leg Holders Of Stainless Steel N* Unit Shall Conform To Relevant Safety Standards And General Safety Standards For Medical Equipment As Per Is:8607. 3 Linen Distribution Trolley N1. Dimensions App: 1500 X 600 X 1200Mm With Three Adjustable Shelves Plus Base. N2. Sturdy Steel Frame And Shelves Aluminium Clad, Nwith Inset Push Handles Fitted At Both Ends, Pvc Nbumper Bar And Name Tags N3. Safety Folds To All Edges N4. Push Handle At Both Ends N5. 125Mm Castors 4 Hi-Lo Icu Bed S.S. With Mattress Nthe General Requirement Shall Be As Per Is-9395-1979 Nframe: Main Frame Work And Chariot Base Frame Work Of Rectangular S.S. Tubular Argon Are Welded Construction, Bows Of Round S.S. Tubular Construction. Ntop: Four Section Top Made From Uniformly Perforated S.S. Sheet ( 16 Gauge ) 04 Cr 18 Ni 10 Or 07 Cr Ni 9 As Per Is–6911-1972. Head Raise Knee Rest Trendelenburg And Reverse Trendelenburg Position Maneuvered By Smooth Crank. Height Adjustment To Facilitate Close Observation By Medical Staff And Convenient Transfer Of Patient From Bed To Trolley & Vice Versa. Height Adjustment Achieved With Ease On Smooth Crank Mechanism. Detachable Stainless Steel Ahead And Leg Bows Fitted With Laminated Panels. Detachable Full Length Stainless Steel Collapsible Side Railing & Rubber Buffers To Absorb Shock. Stainless Steel Telescopic Saline Rod With Four Locations. N Ncastors: 12.5Cms ( Rubber / Nylon ) Swiveling Type Castors Fitted To The Chariot Base, Two Castors To Have Brake For Locking. N Ndimension: Overall Length 2250Mm Suitable For Mattress Of 2010Mm Length. Overall Width 1015Mm Suitable For 100Mm Thick Mattress Width Of 910Mm. Sleeping Level Adjustable Between 620Mm And 820Mm. N Nmaterial: S.S. Sheets – 4 Sectional Top Of 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 Designation As Per Is-6911-1972 N Nrectangular Tubes ( S.S. ) N Nfor Outer Frame 60 X 30 X 16G Thickness And Horizontal Transverse Member 19 X 38 X 16G. Backrest Horizontal And Knee Rest Horizontal Member Of 50 X 25 X 16G For Chariot Frame Base Of 60 X 25 X 16G. N Nround Tubes ( S.S. ) N Nfor Bow Outer Member 31.7 Dia X 18G S.S. Tubes Of 304 Quality. Screw Mechanism Of 31.75 Dia X 18G And 38Mm Dia X 18G S.S. Tubes Chariot Base Castor Receipt Tube Of 31.75 Dia X 9 Backrest And Leg Rest Of 25.4Mm X 18G Tube. N Nperformance Test Under A Load Of 200Kgs N Ntest : It Shall Be As Per Is-4033- N 1068-6.1.1 & 6.1.2 & 8 Of Is- N 9395-1979 N N Nobservation : No Plastic Deformation Takes Place I.E. Bed To Come Back To Its Original Height Within ( + ) 5Mm Tolerance. N Nfinish : In Good Quality Durable Rust Free Finish N Nmarking : As Per 11 Of Is-9395-1979 N 5 Bedside Locker ( S.S. ) N Nthe Bed Side Locker Shall Be Generally Conform To Is-4266-1967, Subject To The Following Specifications: N Nframe : It Shall Be According To 2.1 Of Is-4033-1968. Body Of Sheet Metal Welded Construction. Locker Made From Machine Pressed Crca Sheet Locker Box With Door And Lock. N Ntop : Shall Be According To 2.2 ( A ) & 22 ( B ) Of Is-4033-1968. High Impact, Enclosed On Three Sides, Having One Box & One Drawer Plastic Top With Raised Edges On Three Sides. Super Imposed S.S. Top 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 Of Is-6911-1972. N Ncastors : Mounted On 2 Ball Type 50Mm Dia Swiveling Castors As Per Is-4034-1979 And Two Stumps. N Nshape & Dimension : Overall Length 405Mm Width 405Mm Height 810Mm As Per Figure Of Is-4266-1967. N Nmaterial : Body, Door & Drawer Made Of 20 Gsm Crca Sheet And Top Made Of 24 Gss Sheet. Superimposed On Plywood Top Of 12Mm Thick. N Nfinish : As Per 5 Of Is-4033-1963 & For Top Light Finish Passivated. N 6 Attendant Stool N* Top Size ( 457Mm + / - 5Mm ) X ( 305Mm + / - 5Mm ) X ( 25Mm ) . Height ( 457Mm + / - 5Mm ) Legs ( 4 ) 1 3 / 4 “ ( 44Mm ) Finished Section With Cross Bars ( 51Mm ) X ( 25Mm ) At Top And Bottom Cross Bars. N* The Stool Should Be Made Out Of Ms Angle Frame Epoxy Powder Coated In White Colour With Minimum 50 Microns. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Is 4033 Standard Or Equivalent. 7 Bedside Table ( Adjustable ) Nthe General Requirements Shall Be As Per Is-4033-1968 N Nframe : Basic Frame Of Rectangular Tube Welded Construction. Top Frame Tubular Welded Constructions And Stems Of Sheet Metal Fabrication Or Any Other Reputed Design. N Ntop : Laminated Board In Two Piece Construction. N Ncastors : Rolling-Cum-Swivelling Castors ( 4 Nos. ) As Per Is-4034-1979. N Nshape & Dimension : Overall Length 760Mm L X 350Mm W And Height Adjustable From 750-770Mm To 1050 – 1070Mm ( Approx. ) . N Nmaterial Used: Base Frame Of Rectangular Tube Of 30 X 60 1.6Mm Top Frame Of Square Tube Of 25 X 25 X 1.25Mm And Stem Made From 14G Crca Sheet Of Is-513 D Quality. N Nfinish : Pretreated And Powder Coating 60 Micron Thickness. N Ntest : As Per Is-4033-1968 & Latest Amendments Issued If Any. N Nmarking : As Per Is-6207-1971 & Latest Amendments Issued If Any. N 8 Bed Side Screen ( Three Fold ) N* Over All Size ( W 2438 + / - 10Mm X H 1524 + / - 10Mm ) . Design: ¾” ( 9Mm Diameter Tubular Frame 16 Swg In Sections. Middle Span ( 1219Mm ) . N* A ½ Inch Thick Rod With One End Having Axial Joint And Other End Having Provisions For Holding The Curtain Rod In A Horizontal Manner In A Channel At The Top And Bottom Of Each Section Of The Screen. Mounted On 8 Nos. 2” ( 51Mm ) Nylon Castors. 4 Middle Section. 2 Each For Side Portion. N N* Epoxy Poster Coated In White Colour With Minimum 50Microns. The Above Product Should Conform To Applicable Isi Standard Is 4458 In Respect Of Materials, Welding Process, Test & Performance. Conforming To Is 4458 Standard Or Equivalent. It Should Be Stable. N N* Accessories: Contain Cloth – Sky Blue In Opaque, Lightweight, Shrink Resistant / Pre Shrink, Durable And Suitable For Frequent Laundering. N 9 Fowler’S Bed With Mattress N• Bed Size N204 – 206 ( L ) X 90 – 92 ( W ) X 54 – 56 ( H ) Cms N• Mechanically Operated 4 Sections, Through Crank Mechanism, Collapsible Handle Permanently Attached To The Screw. N• Top Crms Perforated 16 Gauge. N• Smooth Crank Mechanism At The Foot And Panel To Obtain Head Rise Upto 80Oc And Knee Fold Upto 35Oc. N• Frame Tubular Rectangular Frame, U / H Shaped Less On Four 125Cms Swivel Castors ( Nylon / Rubber ) Two With Brakes Head And Legs Ss Bows With Laminated Panels Corners Buffers And Mattress Guards, Four Locations Of Drip Rod. N• Mattress 10Cms Covered With Stain Proof Foam Leather. N• Pretreated And Powder Coated – 50 Micron. N• Spare Two Wheels, One With A Brake, A Set Of Corner Rubbers ( 4 ) , Two Iv Rods. N• In House Quality Test Certificate To Be Provided With Each Bed. N 10 Semi Fowler Beds With Mattress N• Bed Size N204– 206 ( L ) X 90 – 92 ( W ) X 54 – 56 ( H ) Cms N• Two Section Operated Smoothly Through Crank Mechanism At The Foot, Collapsible Handle Permanently Attached To The Screw. N• Frame Tubular Rectangular, Supported On Four Legs, U / H Shaped Legs, Fitted With Four 12.5Cms Swivel Coolers, Two With Brakes, To Be Provided With Mattress Guards And Four Locations For Iv Rod. N• Detachable Foot, Head & Ss Bows With Laminated Panels. N• Pretreated And Epoxy Coated. N• Spare Two Castors, One With A Brake And Two Iv Rods. N• In House Quality Test Certificate To Be Provided With Each Bed. N 11 Baby Craddle Ncrib Size: 76 L X 42 W Cms. Nht. To Crib Top: 103 Cm Nstrong Cr, Erw Tubular Steel Stand On Four Rubber Stumps With Hanging Bright Bars Mesh Crib. Provided With Mosquito Net Aliminium Rod. N Npretreated With In House 7 Tanks Hot Process And Epoxy Powder Coated Minimum 50 Microns With Phosphate Layer Underneath For Corrosion Resistance. N 12 Paediatric Bed Nsize: 1480-1500Mm L, 840-850 Mm Wide And 600Mm Height. Nwith Suitable Mattress 2” Thick, Density 38 / 40 Foam Leather Covered, Water Proof. Nms Steel Tops, Bottom Size 1050 To 1060 Mm With One Horizontal And Seven Vertical Supports, Rubber Shoe, Full Drop Side Racks And Epoxy Coated. N 13 Beds With Side Railing Ngeneral / Technical Specifications Nbed Size ( Approx. ) 206Cm X 91Cm X 56Xm ( Lxwxh ) N Nhospital Bed, Uniformly Perforated Crca Sheet Top, In Two Sections. Provided With 304 Grade Stainless Steel Tubular Removable Laminated Head And Foot Panels. Mounted On Strong ‘U’ Shaped Legs With Four 10Cms. Castors, Two With Brakes. Mechanically Operated Head Raise And Knee Raise Positions Provided With Collapsible Handles Permanently Attached To Both The Screws. All M.S. Welding Must Be With Mig Welding Technology And All S.S. Welding Should Be Tig Welding Technology. Provided With Six Mattress Guards, Provision For I.V.Rod At Four Locations. N Nbed Top ( Two Sectional ) Nm.S. Top Sheets ( Crca ) : 16 Gauge ( 1.2Mm ) Approx. Nm.S. Rectangular Pipe: 16 Gauge ( 1.6Mm ) Approx. 50 X 30Mm N Nbase ( Legs Type ) Nms Round Pipe Of 31Mm ? X 16G N Nbed Panels ( Removable ) Ns.S. Pipe Aisi 304 Grade Of 31Mm ? X 18G Approx. Suitable For Mattress Size: N198 ( L ) X 84 ( W ) Cms. N Npretreated With In House 7 Tanks Hot Process And Epoxy Powder Coated Minimum 50 Microns With Phosphate Layer Underneath For Corrosion Resistance. N Nside Railing ( Drop Side Type ) Napprox. Size 1370Mm L X 393Mm H. Ms Tubular Construction. Slide Inside Bushes Lockable With Knob. Pretreated & Powder Coated. N 14 Almirah - Standard Size N* Size: 190Cm-200Cm Height ( Inclusive Of 15Cm Pedestal Height ) , 90Cm – 95Cm Width, 45Cm – 50Cm Depth. N* 4 Adjustable Shelves Forming 5 Compartments. N* Pre-Treated Prime Quality Crca Steel Conforming To Is-513 Gr. D Quality. 18 Swg For Body And Shelves. 18 Swg For The Doors. Epoxy Polyester Powder Coated Of 50 Microns Or More Dry Film Thickness And Oven Baked At A Uniform Temperature Of 180 To 200 Deg. Centigrade. The Footrest Should Be Made Up Of Anti Rust Steel ( Type To Be Coated ) And Properly Fixed To The Bottom Of The Almirah. N N* All Steel Components Would Have Multibend Construction To Be Done With Tack Welding To Ensure Rigidity And Strength. 3 Way Bolting Device Which Inter Locks Body At The Top And The Bottom With The Help Of A Tongue-In-Groove Mechanism Plus A 6 Lever Unpickable Lock, To Be Made Of Chrome Plated Non-Ferrous Metal Alloy. To Be Stiffened By Hat Shaped Full Height Steel Stiffeners Spot Welded To The Backs Of The Doors. Colour Of Almirah Should Be Grey. N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis Standard 4033 Or Equivalent. 15 Saline Stand N N* Adjustable From ( 1524Mm ) To ( 2438Mm ) . Central Stand 18 Gauge Erw 1” ( 25Mm ) Sq. Pipe 4 Winged Base Each Wing Having A Length Of ( 228Mm + / - 5Mm ) Base Of 2”X1” ( 51X 25Mm ) – 10 Gauge Rectangular Tube On 3” ( 76Mm ) Swivelling Nylon Castor Wheels. N N* A Telescopic ½” ( 13Mm ) Dia S.S. 304 Grade Rod With Double Hooks. And A “T” Type S.S. Hook ( Grip S.S. Stud Fitted In Bakelite Knob For Holding Saline Rod In Position. Epoxy Powder Coated In Grey Colour With Minimum 50 Microns. N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 5880 Standard Or Equivalent. N 16 Stretcher On Trolley N* Length ( 2133Mm + / -10Mm ) , Width ( 610Mm + / -10Mm ) , Height ( 813Mm + / -10Mm ) N* Removable Stretcher Top Made Up Of S.S. N 20Swg 304 Grade With Full Polish N* Sheet Metal: The Top Should Be Dished To A Depth Of Not Less Than 1 ½” ( 37Mm ) Frame. 4 Nos. Of 1” ( 25Mm ) Dia 18 Swg – S Supporting Floor Studs Also To Be Provided At The Bottom Of Stretcher With Nylon Grommets. 1 ¼” ( 31Mm ) Sq. 16 Swg Erw Pipes Used Both For Vertical And Horizontal Supporting Frame. N N* Stretcher Handle S.S. 18 Swg 304 Grade Round Shape With Full Polish. 6” ( 152Mm ) Diameter 4 Nos. Swivelling Castor Rubber Wheels. Epoxy Powder Coating In Grey Colour With Minimum 50 Microns. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 4036 Standard Or Equivalent. N 17 Wheel Chair N* Size Width 650Mm To 720Mm, Length 1000Mm To 1100Mm, Height 910Mm To 950Mm, Floor To Seat Height 480Mm To 510Mm. 1” ( 25Mm ) Diameter 18 Swg Erw Tubular Frame Fitted With Metal Seat And Back. Adjustable Horizontal Aluminium Foot Rest 90 Deg. – 120 Deg. With Tread Flats. Half Round Wooden Hand Rest With 1” ( 25Mm ) Cushion. N N* Solid Rubber Tyre Wheels 24”X1 ½” ( 610X37mm ) Fitted With Self Propelling Steel Hoops And Brake Arrangement. 8” ( 203Mm ) Dia Swivelling Castors In Front. Full Length Axel Should Be Provided To Fix The Rickshaw Wheel. N N* Epoxy Powder Coated With Grey Colour With Minimum 50 Microns. N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 6571 Standard Or Equivalent. N 18 Crash Cart ( S.S. ) : N Nframe : Welded Frame Construction Of Stainless Steel Tubes With 6 Coloured Removable Bins & 2 Polystrin Lockable Storage Unit Of 3 Drawers Each. Top Drawers Have Contrainers Of Different Sizes. Should Have Cushioned Frame To Keep Oxygen Cylinder. N Ntop : Stainless Steel Of Designation 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 Of Is-6911-1972 Top Of 21G Sheet. N Ncastors : Four Swiveling Type Castors As Per Is – 4034 – 1979 Two With Brakes. N Ndimension : Overall Appox. Size : 950 Mm L X 500 Mm W X 1600 Mm H N Nmaterial Used: Stainless Steel Sheet Of Designation 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 Of Is-6911-1972 & Of 21G Frame Of Stainless Steel 1” X 18G Tubes And ¾” X 18G Tubes. Two Polystyrene Lockage Storage With Three Drawers Each. Stainless Steel 12 Mm Rod For Iv Cardiac Message Board Of 12 Mm Thick Ply Duly Laminated. N Nfinish : Good Quality Durable Rust Free As Per Is-4033-1968 N Ntests : As Per Is:4033-1968 N Nmarkings : As Per Is:4033-1968 N 19 Dressing Trolley N N* Length 762Mm + / -5Mm, Width 508Mm + / -5Mm, Height 914Mm + / -5Mm. Double Press Bent Two Nos. S.S. Shelves 16 Swg With 2 Nos. Of S.S. Bowls Of 6” Dia Fitted On S.S. Frame. N* `H’ Frame Work Fabricated Out Of 1” Dia 16 Swg S.S. Steel S.S. Rails ¼ “ 18 Swg On All Four Sides Of “Shelves With 4” Dia 4 Nos. Of Nylon Wheel Swiveling Castors. N N* The Above Product Should Conform To Applicable Isi Standards In Respect Of Materials, Welding Process, Tests And Performance N 20 Medicine Cabinet N N* Steel Almirah ( 1800Mm + / -10Mm ) X ( 850Mm + / -10Mm ) X ( 480Mm + / -10Mm ) . N* A Pair Of Hinged Doors & Handle With Internal Locking Arrangements With Four Fixed Shelves Making Five Partitions. N* Built Of 18 Swg Crca Sheet Throughout Including Shelves And Leg Support. Colour – Sky Blue. N* The Foot Mounts Of The Almirah Should Be Of Totally Antirust Material Of 120Mm Height Covering Almost The Entire Depth. N* Almirah Should Be Fitted With A Lock Of 6 Lever Confirming To Is:729:1979 Or Equivalent. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. N 21 Delivery Table With Mattress N N* Over All Dimension: Maximum Size 1850 – 1870Mm Length When Extended X 850 – 900Mm W X 775 – 800Mm H. N N* Table Tabular Base Should Be Made Of 13.75Mm Dia X 16 G. M.S. Tubes With Horizontal Lengthwise Support Stays A Way So As Facilitate The Obstetrician To Stand Or Sit Close To The Table. Top Should Be Made In 3 Sections Fabricated Mainly Out Of 18 G.S.S. Sheets. Back Rest Section Sizes 750Mm X 625Mm Should Be Welded On 25Mm Dia S.S. Tube X 16 G Hinged On 45Mm Long X 5 Mm Thick M.S. Flat Pieces Welded To The Horizontal Support. The Backrest Should Be Adjustable On Minimum 43 Different Inclination By Means Of Ratchet. N* Arrangement Which Should Consist Of 12Mm Dia S.S. Rod Supported On M.S. Flat 32Mm X 6Mm Thick Size. Middle Section 345 – 355Mm X 650 – 660Mm Made Of 18 G.S. Sheet With Reinforced Trapezoidal Recess Which Should Admeasure Effective 200Mm Inside, 265Mm Outside, 130Mm Deep Size ( Approx. ) . Leg Section Should Admeasure 690 – 700Mm X 590 – 600Mm Shall Be Made Of 18G S.S. Sheet Welded On 25Mm Dia X 16G Tubes. N* It Should Have Suitable Sliding Arrangement. The Entire Tabletop Should Give Trendelenberg Position By Gas Spring System In Stepless Instantaneous Manner. N N* The Removable Safety Side Railing Of Approx. Size 680 – 690Mm L X 195 – 205Mm H Should Be Made Of 12Mm Dia Stainless Steel Rods Fitted On Headend And On Both Sides. Double Bent, Rubber Padded Lithotomic Rods Should Be Made Of 12Mm Dia Stainless Steel. These Should Be Adjustable By 2 Clamps Levers Of 10Mm Dia Stainless Steel Total Rod Having Arm Length Of 100Mm. Patients Bearing Down Hand Grips Should Be Made Of 22Mm Dia X 18 G Stainless Steel Tubes Fixed With Pvc Handle And Should Have Location Adjustability For Patients Convenience. N* The Entire Trendelenberg Arrangement Should Be Mounted On S.S. 18G Rectangular Frame Of Size 60Mm X 30Mm X 16G With One 40Mm X 20Mm X 16G Rectangular S.S. Tube Support. This Frame Should Be Hinged On The Tubular Base. Waste Collecting Stainless Steel Bowl Should Be Provided And Shall Rest On Stainless Steel Bracket Made Of Not Less Than 9.5Mm Dia Stainless Steel Rod. One Number Stainless Steel Telescopic Saline Rod With 12Mm Dia Stainless Steel Rod Should Be Provided Which Should Be Adjustable In S.S. Tubular Socket. N N* Sectional Mattress: 50Mm Thick Mattress ( Polyurethane, Density 40 To 50 ) Should Be Made Of Foam Cushion, Fully Covered With Rexene. All Components Should Be Thoroughly Pre-Treated Chemically In Eight Tank – Treatment System. The Treated Metal Surface Should Then Be Coated With Epoxy Polyester Powder With Paint Film Thickness Of 50 Microns Or More And Oven Baked At 180 Degree To 200 Degree Centigrade. N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. N 22 Gynae Examination Table: N• 2 Section With Mattress With “U”Cut Suitable For Gynae Examination N• Strong Steel Tubular Frame N• Approximate Size 1830 Min ( L ) X 600 Mm ( W ) X 760 Mm ( H ) N• Head Section Adjustable On Ratchet System N• Four Legs Fitted With Rubber Shoes At Bottom N• Finish – Pretreated & Epoxy Coated. N 23 Instrument Trolley – Stainless Steel N* ( 686Mm + / -5Mm ) L X ( 457Mm + / -5Mm ) W X ( 813Mm + / -5Mm ) H, 1” ( 25Mm ) Dia 18 Swg S.S. Tubular Frame. Frame Mounted On 4” ( 102Mm ) Dia Castor Wheels. N* Two Stainless Steel Shelves Double Press Bent 18 Swg Fully S.S. ( 16Mm ) ( 8 Gauge ) Dia Rod Fitted With S.S. Rails On Both Shelves ( 3 Sides Only ) . N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. 24 Swab Rack ( Ot ) N N* Rack Should Be Made Up Of Tubular Frame Of 25.4Mm X 18 Swg 304 Grade Ss Tube On Four 50Mm Dial. Antistatic Swivelling Castors Fitted With Ss Rod Containing Spikes On Ss Drip Trays At The Bottom. N N* It Is Used In Operation Theatre To Keep Sterilized Gauze On Separate Spikes, So As To Keep Track Of Gauze Count, Used During Surgery. N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis Standard Or Equivalent. N 25 Mayo’S Trolley N* S.S. Tray ( 508Mm + / -5Mm ) L X ( 406Mm + / -5Mm ) W, Confirming To Is:5522. N N* Frame Work Mounted On Four Nos. 2” ( 51Mm ) Dia Swivelling Nylon Castors. Framework Should Be Of S.S. 1” ( 25Mm ) Dia 18 Swg Pipe. Tray Fitted With Adjustable 5 / 8” ( 16Mm ) S.S.Rod, Which Is Adjustable From 30” – 50” ( 762-1270Mm ) . Tray Should Be Stable And Removable. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 6905 Standard Or Equivalent. N 26 Instrument Cabinet With Locking Nfacility N N* Length ( 1676Mm + / -10Mm ) , Width 914Mm + / -10Mm ) , Breadth ( 456Mm + / -10Mm ) . Fabricated Using 18 Swg M.S. Sheet For Back And Side Cover. Front Cover Of 18 Swg M.S. Sheet. N N* Front Door Is Fitted With Glass Panel Of 4Mm Thick With Locking Facility And Should Have 4 Nos. Of Glass Shelves 6Mm Thickness. The Cabinet Should Be Rested On An Antirust Base. Epoxy Powder Coating With White Colour With 50 Microns. N N N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 6877 Standard Or Equivalent. 27 Single Step Stool Nthe General Requirements Shall Be As Per Is-4033-1968 N Nframe : Frame Work Of Welded N Tubular Construction. N Ntop : Top Crca 18G Sheet. N Aluminium Top Tread Plates. N Nshoes : Legs Fitted With Rubber N Shoes Durable Quality ( Free N For 1 Year Use ) N Ndimension : Height 20 To 22Cms. Step N Size About 500Mm X N 300Mm W N Nmaterial : Vertical Tube Of Erw 18G N Support Rod Of 9.8Mm N And Top Of Crca 18G Sheet. N Nfinish : Pretreated And Powder N Coated In 50 Microns Thickness. N Ntest : As Per Is-4033-1068 & N Latest Amendments Issued If Any. N Nmarking : As Per Is-4033-1968 & N Latest Amendments Issued If Any. N 28 Anaesthetist Trolley Nframe : Argon Welded & S.S. Tubular Rust Free Construction. N Ncastors : 8Cm / 7.5Cm Dia Wheel Type Swiveling Castors Having Antistatic Tuber Tread Conforming To Is-4034-1979. Nshape & Ndimension : Overleaf Size 760Mm L X 460Mm W X 820Mm H Made Of Strong Cr. Erw Tubular Steel Frame With Two S.S. Shelves. Top Shelf Having Two Drawers Underneath, Is Covered On Three Sides With S.S. Guard Rails. Nmaterial Used: Vertical S.S. Tubes Of 25Mm X 18 G. Longitudinal S.S. Tubes Of Approx. 19Mm X 18G. Railing Of S.S. 10Mm Rod. Stainless Steel Top Of 21G Shelves Conforming To 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 Grade As Per Is-6911-1972. Nfinish : Pretreated. Epoxy Finished. N 29 Kick Bucket ( S.S. ) N Nthe General Requirements Shall Be As Per Is-4033-1968, Subject To The Following Specifications: N Nframe : Stainless Steel Welded Tubular And Rod Construction. N Nbowl Details : Stainless Steel Bowl. N Ncastors : Mounted On Three 7.5Cm Dia Wheel Type Swiveling Castors As Per Is-4034-1979. N Ndimension : Stainless Steel Bowl Of 350Mm Dia Total Height Of Bucket Is 300Mm ( Approx. ) . N Nmaterial Used: Stainless Steel Bowl 22G Conforming To Designation 04 Cr 18 Ni 10 Or 07 Cr 18 Ni 9 As Per Is-4034-1979. N Nfinish : In Good Quality Durable Rust Free Finish. N Ntest : As Per Is-4033-1968 & Latest Amendments Issued If Any. N Nmarking : According To 7 Of Is-4033-1968 & Latest Amendments Issued If Any. N N 30 Opd Furniture N Nsteel Table With Sunmica Wooden Top N* ( 1219Mm + / -10Mm ) Length, ( 762Mm + / -5Mm ) Height, ( 609Mm + / -5Mm ) Width. N N* Table Top ____ Board Covered With Sunmica. N N* Legs 1 ¾” ( 44Mm ) Finished Section One Drawer And Cupboard Are Provided On Right Side With Locking Facility, Made Out Of 3 / 16” ( 5Mm ) One Side Metal Cross Bars 2” ( 51Mm ) X 1” ( 25Mm ) Section Are Used Sufficient Knee Space Provided On The Left Side. N N* Table To Be Epoxy Powder Coated In Grey Colour With Minimum 50 Microns. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. Conforming To Bis 4033 Standard Or Equivalent. 31 Chairs N* Size: Height 86Cm – 90Cm, Depth 56Cm – 60Cm Variation In All Sides. Width 55 – 60Cm And Angle Between Backrest And Seat To Be 110 To 115 Degrees. N* Caning Used For Seat And Back Should Be Of High Tensile Strength. N* Wooden Seat And Back: The Seat And Back Should Be Made From Chemically Treated And Seasonal Wood Caned And Finished With Black Melamine Polish And Fixed To The Tubular Frame Separately With Screw Which Should Not Be Projected Out. The Wooden Frame Must Not Less Than 25Mm Thick + / - 1Mm Thick And 30Mm Width + / - 2Mm Thick. Seat Should Be Well Supported With Cross Bars Or Beams At Front And Back. N* Steel Frame: The Frame Should Be Cantilever Type And Made From Crca Tubular Pipe 1” X 14 Swg Including Armrest Tube. N N* Arm Rest: Arm Rest Handle Should Be Made Of Gas Assist Injection Moulded From Black Polypropylene. All The Four Rubber Float Shoes To Be Provided. N* All Components Should Be Thoroughly Pre-Treated Chemically, And Then Coated Epoxy Powder With Dry Film Thickness Of 50 Micron Or More And Oven Baked At 180 Degree To 200 Degree Centigrade. T.A. Grey. The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. N 32 Patient’S Revolving Stool N N* Top Diameter: 300 – 305Mm. Height Adjustment From 480Mm To 680Mm. N* Four Legs Should Be Cut And Bent To Form A Standard Curve. It Should Be Welded To Central Pipe With Co2 Tig Welding To Give Better Weld Strength. Top Of The Central Pipe Should Be Welded With 4 Tpi Square-Threaded M.S. Nut. Stainless Steel Top Should Be Strengthened By Ribs And Its Edges Should Be Beaded To Avoid Sharp Edges. It Should Be Supported On Strong 10Mm Dia Round M..S. Rings, Which Should Be Welded With Bright Flats. In The Centre Of The Flat 4 Tpi Square Threaded Screw Should Be Riveted. This Screw Turns In The Threaded Nut Of The Base. Base Should Be Fitted With Good Quality Rubber Feet Reinforced With M.S. Washers For Longer Life. N* The Materials Used Should Be As Follows: Tubular Frame Of 1” X 18 G.M.S. Pipe. Central M.S. Pipe Of 1.1 / 2” X 16 G And Top Of Stainless Steel. N* All Components Should Be Thoroughly Pre-Treated Chemically In Eight-Tank Pre-Treatment System. The Treated Metal Surface Should Then Be Coated With Epoxy Polyester Powder With Paint Film Thickness Of 50 Microns Or More And Over Baked At 180 Degree To 200 Degree Centigrade. N* The Above Product Should Conform To Applicable Isi Standard In Respect Of Materials, Welding Process, Test & Performance. N 33 Wash Basin On A Stand N N• Steel Tubular Frame 1” Diameter, Swg 16 With Iron Rod Attached To The Ring For Towel. N N• Size Of The Basin – 16” N N• Height Approx. 85 – 90Cms N N• Epoxy Coated 50 Microns, White Colour N N• Three Legs Base Interconnected With Steel Rods. Legs To Be Provided With Three 50Mm Nylon Swiveling Castors. N 34 Examination Table N Ngeneral / Technical Specifications Noverall Approx Size 1830Mm ( L ) X 610Mm ( W ) X 760Mm ( H ) . Table Top Of 18G C.R. Sheet M.S. In Two Sections. The Head Flap Of 18G C.R. Sheet M..S. In Two Sections. The Head Flap Adjustable On Several Inclinations Both Up And Down By Easily Accessible Rack. Welded Tubular Frame Work Made Of 31.7Mm Od X 18G Tube For Verticals And 25.4Mm Od X 18G Horizontal Stays. Fitted With Rubber Shoe With Metal Washer In The Inside Of The Shoe. N 35 Wooden Benches / Waiting Bench N* Material Is Wood Comprising Of Rectangular Pieces Width 7.5Cms For Seat And Back. N* Frame: A Mild Steel Frame For The Support Of The Seats And Back. Length Of The Bench To Be 185Cms, Height Of The Seat From Floor To Be 45Cms. Width Of The Seat 46Cms. The Height Of The Back From Seat To Top To Be 41Cms. Angle Between Back And Seat Should Confirm To Is:4033. N* Type Of Wood Is Assam Teak Quality Or N Equivalent. N* It Should Be Stable And Polished. N 36 Conference Table ( Oval Shape ) Customized To Accommodate 12 Persons. The Table Should Have The Components Which Can Be Joined And Separated To Increae Its Utility As Multipurpose Table, Without Any Drawer And Locker Box Table Made Out Of 18Mm Plb With Pvc Leaping And Crc Steel Base Provided With One Executive Revolving Chair High Back And Eleven Executive Chairs, Revolving Medium Back, Fully Loaded Fitted With Push Back, Tilting Mechanism, Gas Lift, Shocker Mechanism, Pv Soft Arms Seat And Back Either In Rubber Foam Or In Poly Urethane Of High Density. Base Of Chair Must Be Heavy Dirty Steel Powder Coated With Five Superior Quality Casters. Fabric Must Be Either Crape On Leathrite Of Good Quality. 37 Steel Office Almirah ( Small ) Size Of The Almirah Must Be 1270Mm ( H ) X 760Mm ( W ) X 430Mm ( D ) ( 50” X 30” X 17” ) With Three Shelves Making Four Compartments Without Locker. Doors Of Almirah Must Be Made Of 1.240Mm ( 18 Gauge ) Thick Metal Crca Sheet, Providing 6 Lever Good Quality Lock. Body Of The Almirah Must Be Made Of 1Mm ( 20 Gauge ) Thick Metal Crca Sheet. Almirah Should Be Oven Backed With Superior Quality Stoving Paint For Smooth And Long Lasting Finish. 38 Glass Door Almirah, Almirah Must Be Of Overall Size 1980Mm ( H ) X 915Mm ( W ) X 480Mm ( D ) ( 78” X 36” 19” ) Having Four Adjustable Shelves Making Five Compartments. Door And Body Must Be Made Of 1Mm ( 20 Gauge ) Thick Metal Crca Sheet. Doors Must Be Fitted With 5Mm Transparent Glass For Clear Vision, Providing Three Way Locking Device. 39 Worker Lockers Cabinet Locker Cabinet Must Be Of Overall Size 1980Mm ( H ) X 915Mm ( W ) X 480Mm ( D ) With Separate Lockers Of The Size. 12 Locker Cabinet With Each Locker Size ( 18” ( H ) X12” ( W ) X 17” ( D ) 40 Steel Bookshelf Size Of The Book Case Must Be 1675Mm ( H ) X 840Mm ( W ) X 305Mm ( D ) ( 66” X 33” X 12” ) Or 1675Mm ( H ) 840Mm ( W ) X 380Mm ( D ) ( 66” X 33” X 15” With Four Shutters Made Of 1Mm ( 20 Gauge ) Thick Metal Crca Sheet Fitted With Transparent 5Mm Glass. Shutters Must Slid On Ball Bearings For Smooth Movement And Easy Handling. Body Of The Bookshelf Must Be Made Of 0.8Mm ( 22 Gauge ) . 41 Steel Filling Cabinet With 4 Drawers Size Of The Cabinet Must Be 1380Mm ( H ) X 470Mm ( W ) X 700Mm ( D ) ( 54-1 / 4” X 18-1 / 2” X 27-1 / 2” ) Fitted With Automatic Locking Arrangement. Body Of The Cabinet Must Be Made Of 0.8Mm ( 22 Gauge ) Thick Metal Sheet And Drawers Of The Cabinet Mut Be Made Of 0.63 ( 24 Gauge ) Thick Metal Sheet. Drawers Must Slide Smoothly On Telescopic Channel Systems ( Solid Roller Suspension ) The Cabinet Must Be Painted With Stove Enamel There After Be Baked At A Specified Temperature In Oven For Long Lasting And Smooth Finish. 42 Slotted Angle Rack Closed Type Shelves Of The Rack Must Be Made Of 1Mm ( 20 Gauge ) Thick Crca Sheet And Slotted Angle Must Be Of 2Mm ( 14 Gauge ) Thick Sheet Keeping Only Front Open Size A ) 2590Mm ( H ) X 915Mm ( W ) X 460Mm ( D ) ( 102” X 36 X 18” Having 8 Shelves Making 7 Compartments. 43 Steel Clerk Table Table Must Be Fitted With A Three Drawer Box On The Right Hand Side Of Thickness 0.8Mm ( Body ) And 0.63Mm ( Drawers ) Drawers Must Slide On Solid Roller Suspension For Smooth Movement And Load Bearing Capacity Frame Of The Table Must Be Of 1Mm ( 20 Gauge ) Legs Of The Table Must Be Made Of 1” X 1” Square Pipe Of 16 Gauge Table Shall Be Provided With Sunmica Top Of Novapan Brand: Nsizes 48” ( W ) X 24” ( D ) X 30” ( H ) N 44 Steel Table With Cubboard ( Officer ) Table Must Be Fitted With A Three Drawer Box On The Right Hand Side And A Cupboard Having One Shelf Making Two Compartments On The Left Hand Side Of Thickness 0.8Mm ( Body ) And 0.63Mm ( Drawers ) . Drawers Must Slide On Solid Roller Suspension For Smooth Movement And Load Bearing Capacity Frame Of The Table Must Be Of 1Mm ( 20 Gauge ) Legs Of The Table Must Be Made Of 1” X 1” Square Pipe Of 16 Gauge Table Shal Be Provided With Sunmica Top Of Novapan Brand Nsizes : 72’ ( W ) X 36” ( D ) X 30” ( H ) N 45 Automation Table L-Type ( Class I Officer Table Must Be Fitted With A Three Drawer Box On The Right Hand Side And A Cupboard Having One Shelf Making Two Compartments On Side Table Fitted At Left Side Giving The Table L Shape Thickness 0.8Mm ( Body ) And 0.63Mm ( Drawers ) . Drawers Must Slide On Solid Roller Suspension For Smooth Movement And Lax Bearing Capacity Frame Of The Table Must Be Of 1Mm ( 20 Gauge ) Table Shall Be Provided With Sun Mica Top Of Nova Pan Brand. Sizes : N72” ( L ) X 36” ( D ) X 30” ( H ) Nside Table Size 36” X 24” 30” N 46 Computer Table Table Frame Must Be Made Of 20 Gauge Thick Sheet, Fitted With Drawer Box On Right Side Table Shall Be Provided With Slide In Keyboard Tray And Storage Shelf For Voltage Stabilizer, Cpu And Other Accessories Table Shall Be Provided With Pre-Laminated Board Of Nova Pan Brand. Sizes 48” X 30” X 30” ( Three Drawer ) , 47 Printer Table Steel Printer Table Made With 25Mm Thick Top And 25Mm Thick Prelaminated Board Of Nova Pan Brands For Sides, Specially Designed Slots To Feed Paper On To The Table Top Providing Stationary Input Output Shelves. Nsizes: 24” ( W ) X 24” ( D ) X 30” ( H ) N 48 Computer Revolving Chair With Arms Na Low Back Chair With Pu Seat And Back Fitted With Hard Arms. Chair Must Have Push Back Facility Base Of The Chair Must Be Made Of Crca Steel Of Heavy Gauge ( Approx 18 Gauge ) Duly Powder Coated With Five Castors Of Good Quality. Fabric Of The Chair Must Be Either Crape Or Equivalent To Crape. N 49 Visitor Chair With Arms The Chair Must Be Made Of Superior Quality Steel Capsule Pipe Fitted With Pu Arms Seat And Back Must Be In Rubber Foam / Pu Of About 32 Density Upholstered With Good Quality Cotton Fabric Or Crape. Frame Of The Chair Must Be Powder Coated. 50 Visitor Chair Without Arms Nthe Chair Must Be Made Of Superior Quality Steel Capsule Pipe Fitted Without Arms Seat And Back Must Be In Rubber Foam / Pu Of About 32 Density Upholstered With Good Quality Cotton Fabric Or Crape. Frame Of The Chair Must Be Powder Coated. 51 Executive Chair ( High Back ) Na Revolving Chair Till Head Fully Loaded Fitted With Push Back, Tilting Mechanism, Gas Lift, Shocker Mechanism, Pu Soft Arms, Seat And Back Either In Rubber Foam Or In Polyurethane Of High Density. Base Of The Chair Must Be Of Heavy Steel Duly Powder Coated With Five Superior Quality Casters. Fabric Must Be Either Crape Or Leatherette Of Good Quality N 52 Executive Chair ( Medium Back ) A Revolving Chair Till Head Fully Loaded Fitted With Push Back, Tilting Mechanism, Gas Lift, Shocker Mechanism, Pu Soft Arms, Seat And Back Either In Rubber Foam Or In Polyurethane Of High Density Base Of The Chair Must Be Of Heavy Steel Duly Powder Coated With Five Superior Quality Casters. 53 Centre Table Nsize Of The Table Should Be Rectangular / Oval Shape, It Should Be Made Of Teak Wood Having Top Of 19Mm Thick Commercial Board Of Century, Duro Or Orchid Make Pasted With 1Mm Thick Sunmica Of Either Marino Greenlam, Kitmica Make: Nsizes: ( A ) 48” ( W ) X 24” ( D ) X 18” ( H ) 54 Sofa Set ( 3+1+1 Seater ) It Must Be Made In Standard Size Frame Of The Sofa Set Should Be Made Of Teak Wood Covered With Superior Quality Tapestry / Leather Foam / Velvet Etc. Cushion Of Rubberized Foam Of High Density Nd Of Reputed Make With Isi Mark. Size Of The Center Table Should Be 4’ X 2’ Rectangular / Oval Shape. It Should Be Made Of Teak Wood Having Mica Top Of 1Mm With Bottom Shelf. 55 Settee : Settee Must Be Made Of Teak Wood Frame Covered With 12Mm Ply Frame Should Be Melamine Finish. Size 6’ X 2.5 Of 1.5’ Height With 3” Polyurethane Foam With Lathe Rite Material .. 56 Electro Hydraulic Operation Table With Accessories N• Multipurpose Powered Electro Hydraulic For All Major Surgical Procedures. Table Must Be Requipped To Handle Laparoscopic Surgery, Orthopaedic, Ophthalmic, General Neuro, Urological, Gynaecological And Bariatric. N• Should Have Great C-Arm Accessibility And Full Body Imaging Coverage Without Having To Reposition The Patient. N• Table Top Sections Should Be Powered With Horizontal Shift Of At 530Mm Traversing Top ( Bidirectional-Cranially / Caudally ) For General And Specialist Surgery And Enable C-Arm Access From The Shoulder Line To The Feet. N• To Accommodate Heavyset Or Obese Patients, The Design Load Should Be At Least 250 Kg ( Articulated Weight ) Both During Up / Down And During Operation. N• Removable And Interchangeable Head And Le Sections With An Auto-Locking Mechanism To Suit Different Applications. N• The Remote Control Should Be Waterproof And Easy To Clean After Surgery. There Should Be An Emergency Button, In Case Of An Emergency. N• A Battery Must Be Supplied As Standard Accessory Which Permits Cordless Use. N• A Battery Indicator Must Be Provided For Checking The Remaining Charge At A Glance. N• In Case Of An Emergency A Manual Brake Release Handle Should Be There. N• The Table Must Have A Low Height Range Of Minimum 520Mm And A Maximum Height Of 1000Mm. N• The Table Should Be Provided With An Override Control Panel Necessarily On The Head Of The Column, For Adjustments Of Height. Trendelenburg, Reverse Trendelenburg, Lateral Tilts During Emergencies. N• Port Should Be Available For The Purpose Of Diagnosis And Servicing. N• Achieving Zero Level Position By Pressing A Single Button From The Handset. N• The Table Must Have A Narrow Base Design And A Fluid Resistant Stainless Base. N• Must Have A Slide Centre Stop Function. N• The Pendant Must Be Durable And One-Touch. N• There Must Be A 4-Point Break System Along With Swivel Casters. N• There Must Be A Three Function Foot Control. N• Should Have A Top With Dimensions 500Mm ( W ) X 1950Mm ( L ) N• Should Have Column Base Dimensions With 480Mm X 970Mm N• The Operating Voltage Must Be Dc 24V N• Electric Control To Achieve The Following Positions ( All In Degrees ) . Tredelenburg- Head Up 25*, Head Down 25*, Lateral Tilt – Left / Right 20*, Back Plate Up90*, Down 40*, Head Plate ( Detachable ) Up 60*, Down 90*. N• The Power Source Voltage Must Be Ac 220V, 240V. N
