| 1 | 1 | Supply, erection and commissioning of 60 Cs. V.T. mixed flow pump of 740 RPM, having static lift of 29 feet, including delivery pipe,delivery bends with support of minimum 8mm thickness with epoxy coating inside & outside including flange welding, nut-bolts, complete in all respect, as per site and as per approved technical specifications. | | 1 | No |
| 2 | 2 | Supply, erection and commissioning of 30Cs. V.T. mixed flow pump of 970 RPM, having static lift of 29 feet, including delivery pipe,delivery bends with support of minimum 8mm thickness with epoxy coating inside & outside including flange welding, nut-bolts, complete in all respect, as per site and as per approved technical specifications. | | 1 | No |
| 3 | 3 | Supply, erection and commissioning of 10 Cs. V.T. Axial/mixed flow pump of 1440 RPM, having static lift of 29 feet, including delivery pipe & bends with support of minimum 8mm thickness with epoxy coating inside & outside including flange welding, nut-bolts, complete in all respect, as per site and as per approved technical specifications. | | 1 | No |
| 4 | 4 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 325 HP of 8 pole, 740 rpm, TEFC Motor of IE 2 (as per IS 12615 with latest amendments) Suitable for 60Cs pump complete in all respect & as per approved technical specification | | 1 | No |
| 5 | 5 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 200 HP of 6 pole, 970 rpm, TEFC Motor of IE 2 (as per IS 12615 with latest amendments) , Suitable for 30Cs pump complete in all respect & as per approved technical specification | | 1 | No |
| 6 | 6 | Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415V induction Motor for continuous duty, vertical flange mounted of 100 HP of 6 pole, 1440 rpm, TEFC Motor of (as per IS 12615 with latest amendments) ,suitable for 10Cs pump complete in all respect & as per approved technical specification. | | 1 | No |
| 7 | 7 | Supply, erection and commissioning of Motor Control Centre/LT Panel in control room of pump house of 2000Amp with incomer ACB 4 pole 2000 amp with 2 nos outgoings each of having MCCB of 800Amp, 1 no. outgoing of 400amp. And 1 no. outgoing of 330 amp along with an additional MCB of 63Amp for lighting loads, indicators, relays, meters, push buttons, bus bars and with 2 no Fully Automatic ATS Starters( complete in all respect like relays, indicators timer etc.) of 325HP each with MCCB of 630 amp with contactor rating as 700, 550, 400 amp., 1 no Fully Automatic ATS Starters( complete in all respect like relays, indicators timer etc.) of 200 HP each with MCCB of 400 amp with contactor rating as 400, 300, 200 amp. and 1 no Fully Automatic ATS Starters( complete in all respect like relays, indicators timer etc.) of 100 HP each with MCCB of 330 amp with contactor rating as 250, 185, 110 amp.with an additional arrangement of ON/OFF switchs in front of motor for every starter with designed Capacitor bank of 310 KVAR suitable capacity with 8 step APFCR, Selector Switch, duty contractors, discharge resistors, digital display instruments & other allied accessories for automatic as well as manual operation of Capacitor Bank suitable for 4 nos motors of capacity 325/200/100 HP as per design of Motor Control Centre with a stand of MS Channel( 1 feet up from floor) & degree of protection as per IP-54 as per approved technical specification | | 1 | No |
| 8 | 8 | Supply, erection and commissioning of 325 HP starter for 325 HP motor with ATS including connections and small items as thimbles, nut/bolts, lugs etc. with a stand of MS Channel( 1 feet up from floor) & degree of protection as per IP-54 as per approved technical specification | | 2 | No |
| 9 | 9 | Supply, erection and commissioning of 3.15 MVA, three-phase 11 kV/433-250V, dry type, naturally air cooled, copper wound, outdoor type distribution transformers as per IS 2026 and as per latest electrical specifications/ISS along with all accessories/fittings like be directional rollers, WTI scanner with 3 PT-100 sensors, connection boxes, lugs, nut bolts, cable kit, thimbles, tap changer (± 5%) and complete with base channel mounting etc. including any left over item, complete in all aspect including the suitable transformer platform with fencing with wirenest of required size as per the transformer size and requirement at site. (ABB/ Siemens / GE / Schneider- Make) | | 1 | No |
| 10 | 10 | Providing and fixing of outdoor type capacitor bank with resin cast insulations to be coupled with transformer to compensate its losses of 200 kvaR , 11 kV complete with cable connection | | 1 | No |
| 11 | 11 | Providing and fixing of earthing by digging 200 mm bore, 20 feet depth for transformer, VCB , G-O Switch, L-A etc. complete with copper electrode, GI strip, coke & salt etc. complete as per drawing enclosed. | | 2 | No |
| 12 | 12 | Supply, erection and commissioning of LT single core cable Aluminium Conductor 1000mm2 XLPE Insulated, Armoured cable from Transformer (add bldg.) to Motor Control Centre with thimbles. | | 800 | Mtr |
| 13 | 13 | Supply, erection and commissioning of LT single core cable Aluminium Conductor 630 mm2 XLPE insulated, Armoured cable from Transformer to Motor control centre as neutral with thimbles along phase cable. | | 250 | Mtr |
| 14 | 14 | Supply, erection and commissioning of LT cable 3 core Aluminium Conductor 400mm2 XLPE insulated, Armoured cable from panel to Motor. | | 200 | Mtr |
