}

Machinery and Tools, Hardware and Fasteners, Bolts, Clamps, Nuts Supply, Springs, Washers, Electrical Industry, Electrical Product, Conductor, Office of The Executive Engineer GCD Jammu-Jammu And Kashmir

Power Development Department has published Machinery and Tools, Hardware and Fasteners, Bolts, Clamps, Nuts Supply, Springs, Washers, Electrical Industry, Electrical Product, Conductor. Submission Date for this Tender is 15-04-2019. Bolts Tenders in Office of The Executive Engineer GCD Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

19919600
Machinery and Tools, Hardware and Fasteners, Bolts, Clamps, Nuts Supply, Springs, Washers, Electrical Industry, Electrical Product, Conductor
Open Tender
Indian
Jammu And Kashmir
Office Of The Executive Engineer Gcd Jammu
15-04-2019

Tender Details

Supply Of Material For Grid Stations Line Material T And P Etc For The Year 2019-20=> 4R Stock Bridge Type Vibration Damper Suitable For Aaac / Panther ( Of 37 / 2.88Mm Designation ) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel / Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized ( Is 2633 ) . The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test Item49 1.00 Nos Mid Span Compression Joint For Aaac / Panther ( Of 37 / 3.15Mm Designation ) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength 2.23 Steel.Minimum Failing Load ( Slip Strength ) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac

Key Value

Document Fees
Refer document
EMD
INR 20000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail