Construction, Building Material, Angle, Construction Material, Bar, Fencing Work, Wire Fencing, Machinery and Tools, Hardware and Fasteners, Bolts, Nuts Supply, Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Paint Supply, 52 ENGINEER REGIMENT-Manipur

Supply Of Construction Material For Security Fencing, :- 1 Structural Steel Rolled Section Angle Iron 65 X 65 X 6Mm Fencing Post 3.75M Long Conforming To Is2062-1984 Including Fabrication Of 0.75M Long Top Portion For Swan Neck At 30 Degree To Vertical Including Making Six Round Holes Of 15Mm Dia On Vertical Posts For Fixing Of Nuts And Bolts And Three Nos Of 15Mm Dia Holes For Fixing Strut And Four Nos Notches On The Swan Neck And Welding Of Two Nos Of 16Mm Ms Rod Each Of 0.23M Length To Bottom End Of Picket For Anchorage Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For The Exposed Surface Of Angle Above Gl Complete And Two Coats Of Bituminous Paint On Embedded Portion Of Angle ( 0.60M ) . Weight Of Each Picket Shall Be Not Less Than 21.75 Kg. Make Tata / Sail / Jindal 2 Structural Steel Rolled Section Angle Iron 65 X 65 X 6Mm, 2.70M Long 15.89 Kg Per Picket Conforming To Is2065-1984 Including Fabrication For Strut Post Bending At Top Portion Including Making Three Nos Holes Of 15Mm Dia Including 0.23 M Long 16 Mm Dia Ms Rod Two Pieces To Be Welded At Bottom For Anchoring Purpose Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For Exposed Surfaces Of Angle Above Gl And Two Coats Of Bituminous Paint On Embedded Portion Of Strut 0.55 M Below Gl. Make Tata / Sail / Jindal 3 Galvanised Two Strand Steel Barbed Wire, Line Wire Of 2.24Mm Diameter Wire, Barb At 75 Mm Spacing. The Barbs Shall Be Pointed Wire Of 2Mm Dia Gi Wire Confirming To Is:278 Of 1978 ( Third Revision ) With Amdt No 1 To 4. The Points Of Barbs Shall Be Sharp. The Line And Point Wires Shall Be Circular In Section Free From Scales And Other Defects And Shall Be Uniformly Galvanized. The Barbed Wire Shall Be Manufactured As Per Clause 11.2.1 And 11.2.2 Respectively Of Is Specification Cited Above Read With Is 4826 -1979 ( First Revision ) . Make Tata / Sail / Jindal

Refer document

INR 22000.0 /-

Refer document