Construction, Building Material, Angle, Construction Material, Bar, Fencing Work, Wire Fencing, Machinery and Tools, Hardware and Fasteners, Bolts, MS Flat, Nuts Supply, Screws, Washers, Fabrication and Casting, Fabrication Work, Chemical Oil and Gas, Che, 52 Engr Regt-Manipur

Supply Of Construction Material For Security Fencing At C Lanchah And Zoukhunou, :- 2.02 Structural Steel Rolled Section Angle Iron 65 X 65 X 6Mm, 2.70M Long 15.89 Kg Per Picket Conforming To Is2065-1984 Including Fabrication For Strut Post Bending At Top Portion Including Making Three Nos Holes Of 15Mm Dia Including 0.23 M Long 16 Mm Dia Ms Rod Two Pieces To Be Welded At Bottom For Anchoring Purpose Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For Exposed Surfaces Of Angle Above Gl And Two Coats Of Bituminous Paint On Embedded Portion Of Strut 0.55 M Below Gl. Make Tata / Sail / Jindal 2.03 Galvanised Two Strand Steel Barbed Wire, Line Wire Of 2.24Mm Diameter Wire, Barb At 75 Mm Spacing. The Barbs Shall Be Pointed Wire Of 2Mm Dia Gi Wire Confirming To Is:278 Of 1978 ( Third Revision ) With Amdt No 1 To 4. The Points Of Barbs Shall Be Sharp. The Line And Point Wires Shall Be Circular In Section Free From Scales And Other Defects And Shall Be Uniformly Galvanized. The Barbed Wire Shall Be Manufactured As Per Clause 11.2.1 And 11.2.2 Respectively Of Is Specification Cited Above Read With Is 4826 -1979 ( First Revision ) . Make Tata / Sail / Jindal 2.04 Galvanised Steel Chain Link Fence Fabric Of Mesh Size 125Mm X 125Mm ( + / - ) 4Mm Of 4.00Mm Nominal Diameter. The Size Of Chain Link Fence Fabric Shall Be 2.4M X 15M Mesh Wire. Galvanized Chain Link Shall Be Manufactured As Per Is4826. Make Tata / Sail / Jindal 2.05 Ms Flat Of 40Mm X 4Mm, 2.4 M Long With Holes Of 15Mm Dia, All As Per Drg Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint. Make Tata / Sail / Jindal 2.06 Gi Binding Wire 1.20Mm Dia. 2.07 Mild Steel Bolts With Hexagonal Head At One End And Screwed On The Other End, Fitted With One Nut And Two Washers. The Bolt Shall Be 12Mm Dia And 50Mm Long. 2.08 Coarse Sand Confirming To Is383-1978. 2.09 Stone Aggregate 20Mm. Confirming To Is383-1978. 2.10 Graded Stone Aggregate 40Mm. Confirming To Is383-1978

Refer document

INR 22000.0 /-

Refer document