Supply Of Machinery And Equipments ( 1 Automobile Engineering 1.01 Cut Section Working Model Of Single Plate Clutch Assembly:- Made Out Of Original Parts Such As Flywheel, Pressure Plate, Clutch Plate Etc. To Demonstrate The Working Of Clutch Assembly. By Operating The Pedal Provided The Model Can Be Demonstrated. The Entire Model Is Mounted On A Sturdy Iron Frame. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.02 Working Model Of Flywheel:- Made Out Of Original New Parts Will Be Suitably Sectioned To Demonstrate The Internal Construction Details Showing The Minute Information And Working Of The Same, The Model Will Be Suitably Painted And Mounted On A Navopan Wooden Base. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.03 Cut Section Models Of Shock Absorbers:- Made Out Of New Original Parts Suitably Sectioned And To Demonstrate The Working Of Shock Absorbers. The Model Will Be Mounted On A Frame Suitably Colour Imported Painting Will Be Carried Out Along With Miracle Coating For The Model Will Be Done For Extra Gloss And Shine. The Painting Will Be Carried Out In Such A Way That Different Colours Will Be Used For Different Components Such As Identification Of Area Etc. According To The Colour Code For Easy Identification Of Different Systems And Mechanisms. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.04 Turbo Charger, Variable Turbo Charger:- Made Out Of Full Size Original Parts Suitably Sectioned And To Demonstrate The Working Of Turbo- Charger Is Mounted On A Suitable Base. 1.05 Car Washer:- High Pressure Hot And Cold Car Washer 130 Bar At 10 Litres Per Minute. The Unit Shall Have 3 Ceramic Pistons, Dry Vertical Boiler Ith Diesel Oil Rid Crank Pump, Pressure Control Device, Total Stop Device, Thermic Switch For Motor Protection, Thermostat For Temperature Setting, Low Pressure Detergent Intake From The Built In Tank Ce Certified And Iso Certified. 1.06 Fully Hydraulic Lift :- 5 Ton With All Accessories Operating Pressure 9 To 12 Kgf / Cm2 Lifting Height: 1500Mm Ce Certified & Iso Certified 1.07 Grinding Machine, General Purpose:- D.E. Pedestal With 300 Mm Dia. Wheels Rough And Smooth. 1.08 Demonstration Board Of Mpfi Engine:- This Open Demonstration Board Is Made Out Of Original Parts Such As Petrol Injector, Intake Manifolds, Throttle Body, Distributor, Ecu, Canister Purge Valve, Carbon Canister, Fuel Tank Module, Supporting Sensors Such As Lambda Sensor, Engine Speed Sensor, Cam Position Sensor Etc. With Necessary Wiring Connection To Show The Circuit Connections. The Entire Model Will Be Suitably Sectioned And Mounted On A Navopan Board. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.09 Air Conditioner Trainer Kit:- Made Out Of Original New Parts Will Be Suitably Sectioned And Arranged To Demonstrate The Internal Construction Details Showing The Minute Information Such As Ac Compressor, Condenser, Radiator, Its Pipe Lining, Blower / Fan Assembly Etc. The Model Will Be Suitably Painted And The Entire Model Is Mounted On A Sturdy Iron Frame. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.1 Air Compressor:- 2 Stage Twin Cylinder Air Cooled Reciprocating Type, Driven By 7.5 Hp Motor 3 Phase Motor, With Pure Cast Iron 175 Psi Operation, 250 Litres Tank With 50 Metres Heavy Duty Air Pipe, Nozzles And Clamps Complete. 1.11 Lifting Jack ( Screw Type ) :- 5 Tone Capacities Iso Certified Company. 1.12 Driving Simulator:- A Versatile Indoor Training Simulator For Imparting Basic And Advanced Driving Skills.• Ideal For Teaching Driving To Novice Drivers Test Drives Of Different Experience Level, Conduct Refresher Training For Out Of Touch Drivers.• Configurable For Light, Medium And Heavy Vehicles With Either Left Or Right Driving Options.• 120 Degree Coverage, Three Monitors, Original Seat, Realistic Controls, Dash Board Assembly, Safety Belt, Gauges Transmission And Instrumentation Gives Real Feel.• 30 Cgi Driving Scenes Of Different Types Of Roads, Traffic, Terrains And Environmental Conditions With Rear And Side View Mirror Insets.• Recording / Playback Of Faults Committed By The Trainees.• The Trainer Can Inject On- Line Faults And Obstacles To Assess The Reactions.• Basic System Has One Instructor Station And One Driver Station. Up To Driver Station Can Be Controlled By One Instruction Station.• Environmental Conditions Like Rains, Fog Snowfall, And Intensity Of Light Can Simultaneously Be Created. 1.13 Exhaust Gas Analyser With Pc:- Features: 32 Bit Microprocessor Based Exhaust Gas Analyser, Easy To Use Bench Top Design, Declaration Of Conformity To Oiml , Cass9, Iso 3930, Ideal For Fault Finding And Regulated Testing Measures, Co, Hc, Co2, And Lambda, Fast Warm Up Time And Fast Response Time, Rpm And Oil Temperature Measurement. Print Result Via Rs 232 And Cng Vehicles. Product Standard: Oiml Class 9. Measured Gases: Using Ndir Bench Co / Co2? Hc Using Electrodes- Chemical Cells, O2 Lambda 0.5-2.0 , Power Supply 100- 300 V, Ph. / 50-60 Hertzrpm, 2, 4 Stroke, Dis 2-12 Cyl Warm Up Time 120 Sec. Fuel Types: Petrol, Lpg, Cng, Weight 5 Kg, Probe Insertion Length 300 Mm, Ambient Operating Range +5 Deg To 45 Deg Arai Approved, Ce Certified And Iso Certified. ( All The Parts Should Be New. No Second Hand Part To Be Used ) 1.14 Sectioned Diesel Engine:- 4 Cylinder Water Cooled Overhead Cam, Chain Driven Engine Should Be Mounted On Ms Sturdy Frame Having 4 Caster Wheels For Easy Shifting And Panel Board Fitted On Frame Having Chester Unit. The Engine Should Be Brand New With Excise Clearance Bs4 Motorised To Run At Slow Speed For Demonstration. 1.15 Sectioned Petrol Engine:- 4 Cylinder Water Cooled Overhead Cam, Chain Driven Engine Should Be Mounted On Ms Sturdy Frame Having 4 Caster Wheels For Easy Shifting And Panel Board Fitted On Frame Having Chester Unit. The Engine Should Be Brand New With Excise Clearance Bs4 Motorised To Run At Slow Speed For Demonstration. 1.16 Diesel Engine Crdi, 4 Cylinder:- Diesel Engine Crdi, 4 Cylinder: Diesel Engine 4 Cylinder, 4 Stroke Crdi 1200 Cc To 1600 Cc, 60 Bhp To 120 Bhp At 5000 / 6000 Rpm, Mounted On C Frame Spray Painted Having 4 Chester Wheels Easy Shifting, Water Cooled Along With All Accessories I.E. Radiator , Fuel Tank Alternator, Battery, 12 V 60 Ah, Starter Motor, Cooling Fan, Ecu / Necessary Gauges, Charging, Amp Etc. With Service Tool Kit. ( Brand New With Excise Clearance And Bs4 Certified ) . 1.17 Petrol Engine 4 Cylinder 4 Stroke Mpfi:- Petrol Engine 4 Cylinder 4 Stroke Mpfi Brand New 900Cc To 1200Cc. 60Bhp To 120 Bhp At 5000 / 6000 Rmp Mounted On C-Frame Spray Painted Having 4 Coaster Wheels For Easy Shifting , Water Cooled Along With All Accessories I, E Radiator, Fuel Tank, Alternator, Battery ( 12Volt 60Ah ) , Stator Motor, Cooling Fan, Ecu / Necessary Sensor, Injector, Temperature Gauge, Charging Lamp Etc With Service Tool Kit ( Brand New With Excise Clearance And Bs4 Certified ) . 1.18 Engine Scanner:- Engine Scanner With Blue Tooth / Wi Fi Supported Should Be Able To Find Faults On All Indian Vehicles. Screen Coloured Led With Inbuilt Cameras ( Front And Rear ) Complete With All Connectors. Iso 9001-2000 Certified Or Isi Certified. ( Brand New ) 1.19 Ignition System Of An Automobile:- Mpfi System, Distributor, And Terminals For Battery Connections With Battery. Actual Working Model Of Ignition System Of M.P.F.I Engine With Working Fuel Supply System Consisting Inlet Manifold, Injector Rail With Injectors, M.P.F.I Fuel Pump Fitted In Transparent Case, Battery, Fuel Tank, Distributor Motorized, Ignition Coil Fuel Filter, Spark Plugs Fitted On Panel All Parts To Be Brand New 1.2 Pillar Type Drilling Machine:- Geared Pillar Drilling Machine With Auto Feed.Drilling Capacity In Mild Steel-32MmNo. Of Spindle Speeds-15Motor-2H.P.Coolant Pump, Drill Chuck And Table Vice 1.21 Gas Welding:- One Oxygen Filled Cylinder And One Acetylene Filled Cylinder, Withregulators, Pipe 6Mts For Each Cylinder. Set Of Torches, High Pressure Cutting Acetylene Torch. 1.22 Spot Welding:- 25 Kva Pedal Operated. 1.23 Seam Welding Machine Circumfere-Ntially With Suitable Compressor:- Dia.Of Upper Wheel ( Cu-Alloy ) -200MmDia .Of Loewerwheel ( Cu-Alloy ) -200MmCapacity-30Kva.Primary Voltage-415, Standard Stroke-75Mm.Min -Max Force-160-480Kgf With Digital Programme Logic Control, Fifteen Memories 1.24 Ultra Sonic Injection Cleaning Equipment:- Suitable For Cleaning 4 Injectors, Ultra Sonic Bath As Standard Supply. Power Supply Ac 220 V, 50 / 60 Hertz, Total Input Power 250 W, Ultra Sonic Cleaner Power 100 W, Simulated Rm Range 10 To 9990 Rpm, Step 10 Rpm, Time Range 1 Sec To 999 Sec, Pulse Width 0. To 25 Ms, Fuel Tank Capacity 4700 Ml. 1.25 Electrical Welding Transformer Set With Accessories:- 1.Electric Welding Transformer With Copper Winding With Accessories 300Amp Complete With Cable 5 Mts2. Electric Welding Transformer With Copper Winding With Accessories 400Amp Complete With Cable 5 Mts 1.26 Shearing Machine:- Capacity-1225X2mmCrank Shaft Dia-85MmFly Wheel Dia-26MmGear Dia-24MmElectrical Motor-2H.P. 1.27 Rockwell Hardness:- Machine. With Automatic Zero Setting Dial Gauge And Automatic Load Selection. Calibrated Weight Set 60, 100, 150 Kgf.Steel Ball Indentor 1 / 16” ( 01No ) , Diamond Cone Indentor 120Deg ( 01 ) , Test Block-B And Test Block-C ( 01 Each ) 1.28 On Car Brake Lathe Machine:- Power Requirements, 115V, 15A, 60Hz, Rotor Max Diameter, 15.75 In. ( 400 Mm ) / 16.25 In, Rotor Max Width 2.75 In. ( 70 Mm ) , Feed Distance 4.3 In. ( 109 Mm ) , Spindle Speed Adjustable And AutoVariable ( Act ) , 0–120 Rpm Reversible, Motor 1.5 Hp ( 1.12 Kw ) @ 3450 Rpm, Spindle Height, High Range ( R ) Spindle Height, High Range ( R ) , Width ( W ) 27 In. ( 686 Mm ) , Height ( H ) 47 In. ( 1194 Mm ) , Depth ( D ) 34 In. ( 864 Mm ) 1.29 Cylinder Boring Machine:- Boring Capacity 38 To 78 Mm, Boring Head Travel 300 Mm, Spindle Speed 50 To 500 Rpm, Working Table Size ( Length X Width ) ( 600X300mm ) Along With All Standard Accessories. Motor 1.5 Kw 1.3 Electro- Mechanical Two Post Lift:- Capacity 4 Ton, Electro Mechanical Two Post, Vey Low Minimum Height 105 Mm, Quick Easy Installation And Very Little Maintenance , Asymmetric Design And Angle Set Posts Allow Car Doors To Be Opened Freely, Lifting Height 1890 Mm, Lifting Time 45 Sec, Overall Height 2600 Mm, Overall Length 3000Mm, Inside Columns 2125 Mm, Lowest Height 105 Mm, Motor 4 Hp, Power Three Phase 415 Volts 50 Hz Certified And Iso Certified. 1.31 Fip Calibration Machine:- Capable Of Accurately Testing And Calibrating Diesel Fuel Injection Pumps Right From 2 Cylinders Up To 8 Cylinders, It Can Test All Kinds Of Diesel Fuel Pumps Listed Below:Bosch Distributor , Ve Pumps, Inline Pumps Of All Types Including Pi Pumps, All Types Of Lucas / Delphi Rotary Pumps Including Dpc No Of Cylinders 8, Drive Ac Frequency / Electronic Drive .Main Motor 7.5 To 10 Bhp. Rpm; Variable From 0 To 5000 Rpm. Pressure Gauges: Digital And Antilog, Fuel Supply : 1 Hp 1.32 Cylinder Honing Machine:- Hone Length Capacity 305 Mm, Honing Speed General 80 To 160. Max. Cylinder Block Length 1000 Mm, Motor 3 Phase 2 Hp. 1.33 Timing Light:- Digital Timing Light Tool With Advance Tacho.Digital Tacho: 249- 9990 Rpm, Digital Advance 0 Deg To 90 Deg. 1.34 Armature Growler Tester:- 110 V, Iso Certified. 1.35 Roller Brake Tester:- Roller Dia. 150 Mm, Weight 1360 Kg, Roller Speed 1-1.23 Kph, Power 5-15 Hp, Gear Motor Single Phase. 1.36 Spark Plug Tester:- Working Air Pressure; 5 Kg / Cm2-16Kg / Cm2, For Cleaning The Plug -5 Kg / Cm2 To 16 Kg / Cm2, Electrical Testing Of The Plug; 10 Kg / Cm2 To 16 Kg / Cm2, Power Supply: Input Voltage 220 V, Ac With Earth. Output Voltage 12 Kv To 19 Kv. ( High Tension Voltage ) , Electronic Vibrator 220V / 12 V. 1.37 Tyre Changer Machine:- Wheel Dia. Standard= 10 Inch To 20 Inch, Operating Pressure+ 100:175Psi, Bead Breaking Force= 2800 Kg, Electrical Motor= 220V / 440V, 50 Hertz, Dimensions 1300X850x800, Clamping Pneumatic With 4 Jaws Complete, Ce Certified And Iso Certified. 1.38 Used Engine In Working Condition:- 4 Stroke, 3 Cylinders Petrol Engine For Dismantle And Assemble Purpose 1.39 Used Engine In Working Condition:- 4 Stroke , 4 Cylinder Diesel Engine For Dismantle And Assemble Purpose 1.4 Used Differential In Working Condition:- For Dismantling And Assembling Purpose 1.41 Used Alternator In Working Condition:- For Dismantling And Assembling Purpose 1.42 Used Starter In Working Condition:- For Dismantling And Assembling Purpose. 1.43 List Of Models Required For Automobile Engineering:- • Cut Section Model Of Demonstration Chassis• Cut Section Model Of Wankle Engine• Cut Section Model Of Synchromesh Gear Box. ( Working ) • Cut Section Model Of Gear Box With Differential ( Tran- Axle, Working ) • Cut Section Model Of Constant Mesh Gear Box ( Working ) • Tractor Transmission Assembly With Gear Box , Rockshaft Assembly• Model Of Cut Sectioned Transfer Assembly ( Working ) • Cut Section Models Of Steering Gearboxes ( Working ) : Rack And Pinion, Worm And Roller, Recirculation Ball Type, Worm And Sector Type, Eps, Power Steering Hydraulic, Two Wheeler Steering.• Cut Section Model Of Fully Floating Axle With Differential And Rear Mechanism ( Working ) • Cut Section Model Of Semi- Floating Axle With Differential And Rear Mechanism ( Working ) • Cut Section Model Of Mechanical Brake System ( Working ) • Cut Section Model Of Disc Brakes System ( Working ) • Working Model Of Power Windows: Made Out Of Original Parts, Will Be Suitably Sectioned And Arranged To Demonstrate The Internal Construction Details Showing The Minute Information Such As Motor And Its Gear Arrangement Etc. And Working Of The Same Can Be Shown By Connecting It To A Battery, The Model Will Be Suitably Painted And The Entire Model Is Mounted On A Sturdy Iron Frame Along With Sealed Maintenance Free Battery For Operation. ( Brand New ) Cut Section Model Of Complete Both Sides Double Wishbone Suspension With Drive Shaft. 1.44 List Of Training Boards / Training Modules:- • Training Platform For Hydraulic Power Steering ( Working ) • Demonstration Board Of Ignition System Of An Automobile 4 Wheeler• Demonstration Board Of Electronic Ignition System Of An Automobile 4 Wheeler• Demonstration Board Of Air Conditioning System Of A Car.• Demonstration Board Of Fuel Supply System Of A Petrol Engine .• Demonstration Board Of Fuel Supply System Of A Diesel Engine• Training Module For The Mpfi Petrol Engine• Training Module For The Crdi Pump Diesel Engine• Training Platform For Abs Brake System 2 Mechanic Motor Vehicle 2.01 Cut Section Working Model Of Diaphragm Clutch Assembly:- Made Out Of Original Parts Such As Flywheel, Pressure Plate, Clutch Plates, Etc. To Demonstrate The Working Of Clutch Assembly. By Operating The Pedal Provided The Model Can Be Demonstrated. The Entire Model Is Mounted On A Sturdy Iron Frame ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.02 Cut Section Working Model Of Centrifugal Clutch Assembly:- Made Out Of Original Parts Such As Flywheel, Pressure Plate, Clutch Plates, Etc. To Demonstrate The Working Of Clutch Assembly. By Operating The Pedal Provided The Model Can Be Demonstrated. The Entire Model Is Mounted On A Sturdy Iron Frame ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.03 Constant Mesh Gear Box With Stand For Dismantling & Assembling:- Made Out Of Original Full Size Used Gearbox, Suitably Sectioned To Show The Gear Mechanism Of Forward And Reverse Speeds. A Crank Lever Is Provided To Demonstrate The Mechanism. Complete Unit Is Mounted On A Sturdy Iron Frame ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.04 Full Floating Axle & Semi Floating Axle Assembly:- Made Out Of Original Heavy Vehicle Parts, Suitably Sectioned To Show Clearly The Action Of Differential Gear Box, Such As Pinion Crown Wheel In Differential And Brake Drums In Rear Axle, A Crank Handle Is Provided To Demonstrate The Model. The Model Is Mounted On A Sturdy Iron Frame.Semi FloatingMade Out Of Original Light Vehicle, Suitably Sectioned To Show The Action Of Differential Gear Box And Brake Drums In Rear Axle. A Crank Handle Is Provided To Demonstrate The Model. The Whole Model Is Mounted On A Sturdy Iron Frame 2.05 Cut Section Working Model Of Automatic Transmission Gear Box:- Made Out Of Original Full Size Automatic Transmission Gearbox, Suitably Sectioned To Show The Gear Mechanism Of Forward And Reverse Speeds. A Crank Lever Is Provided To Demonstrate The Mechanism. Complete Unit Is Suitably Painted And Mounted On A Sturdy Iron Frame ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.06 Working Model Of Torque Converter:- Made Out Of Original New Part, Will Be Suitably Sectioned To Demonstrate The Internal Construction Details Showing The Minute Information, And Working Of The Same, The Model Will Be Suitably Painted And Mounted On A Navopan Wooden Base ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.07 Wheel Alignment Set Up Instrument 3D:- Measuring Parameters, Range & AccuracyTechnical Features, Accuracy Measuring Range Total Range Front AxleTotal Toe + / - 2’’ + / - 2 Deg + / - 5 DegPartial Toe + / - 1’’ + / - 1 Deg + / - 2 DegSet Back + / - 2’’ + / - 2 Deg + / - 5 DegCamber + / - 2’’ + / - 3 Deg + / - 10 DegCaster + / - 7’’ + / - 10 Deg + / -18 DegRear Axle Total Toe + / - 2’’ + / - 2 Deg + / - 5 DegPartial Toe + / - 1’’ + / - 1 Deg + / - 2 DegCamber + / - 5’’ + / - 3 Deg + / - 10 DegThrust Angle + / - 2’’ + / - 2 Deg + / - 5 DegPower Supply 220 – 230 Volt Ac 50 Hz, Branded Computer With Printer, Latest Accurate Ccd Technology With 8 Ccd Sensor With Infrared Communication Between Sensors & Blue Tooth Data Transfer From Measuring Head To The System, Self Extend & Renew Automobile Data, Diagnostic Messages, Shows Service Station Name, Address, Vehicle No. & Mileage Can Be Printed With Test Results, Toe Curve Program, Automatic Spoiler Program, Online Correction Of Camber, Caster & Toe With Graphical Display, Inbuilt Data Storage Software For Vehicle History, Summary & Comparison Of Diagnostic Repair Values On Single Screen, Big Wheels For Easy Movement, Simple Calibration With 3D, Self Calibration, Caster Compensation & Steering Angle Self Calibration For Easy Understanding Of The Operation, Preloaded With Live Demonstration Software, Edit Option For Wheel Size For Automatically Calculation Of Toe Value. 2.08 Tyre Vulcanizing Machine:- Vulcanize With Double Heating Plate For The Heaviest Duty Jobs. It Has An Air-Operated System To Close The Plates Monitored By A Pressure Governor ( From 0 To 12 Bar ) And Is Complete With 60 Minute Timer. The Two 600 W Heating Plates Allow Tyres Of All Types To Be Vulcanized In All Positions Single-Ph. P. Rating V 230, Power 1200, Frequency 50 Hz, Pressure Bar – 10, Dimensions Mm 190 X 100, Machine Dimensions Mm 490X200x1000, Weight – Kg 35 ( Reputed Brand Only ) 2.09 Wheel Balancing Machine With Accessories:- Computerized With 16 Bit Microprocessor Controlled Video Graphic Display, Cars Lcvs, Trucks , Automatic Detection Of Tyres, Low Balancing Speed For Cars 120 Rpm And For Trucks 80 Rpm, Automatic Gauge For The Distance And Diameter Measuring And Application Of Adhesive Weights, Automatic Wheel Clamping, Automatic Start / Stop. 1 Gm Resolution For Cars And 10 Gm Resolution Trucks, 3 Balancing Modes, 7 Alu Programs, Alloy Wheel Balancing, Shift Plane / Split Weight, Hidden Weight Program, Emergency Stop, Safety Handle, Wheel Guard, Pneumatic Lift, Car And Truck Working Rim Width Setting Range 4 Inch To 22 Inch, Rim Dia, Setting Range For Cars And Trucks 12 Inch To 30 Inch, Maximum Diameter 1220 Mm, , Maximum Wheel Weight 200 Kg, Power 320 Watts, Total Weight 255, Car Balancing Speed 120 Rpm, Truck Wheel Balancing Speed 80 Rpm, Resolution 1 Gm, Maximum Unbalance Value Calculated 1990 Gms, Average Spin Time Of Wheels For Cars 8 Sec. And For Trucks 18 Sec. Shaft Diameter 46 Mm , Ce Certified And Is Certified / 2.1 Cut Section Of Cross Ply & Radial Tyres:- Branded : Ceat, Mrf, Jk , Apollo Or Equivalent 2.11 Drum Break Assembly:- Made Out Of Original Parts Such As Two Brake Drum Assembly, Two Master Cylinder ( One Sectioned ) , Wheel Cylinders ( One Sectioned ) , Brake Shoes, Etc., The Model Can Be Demonstrated By Operating The Lever Provided ( Brand New ) . 2.12 Air Break Assembly:- Made Out Of New Original Parts Such As Air Compressor, Unloaded Valve, Foot Valve, Booster, Wheel Assembly, Air Tank, Control Valve Etc The Brake System Will Be Fitted With Two Front Wheel Assembly Complete ( With Out Axle ) And The Drum Will Be Suitably Sectioned To Show The Working Of The Brake Shoe. Other System Will Be Mounted As It Is And Will Be Made To Function ( Foot Brake, Hand Brake Etc Will Be Functional. ) The Entire System Will Be Mounted On A Sturdy Iron Frame. A F.H.P Single Phase220 / 230 V Ac Motor Will Be Coupled To The Compressor For Generation Of The Air, Which Is Used For The Operation Of The Model ( Brand New ) . 2.13 A.C Welding Transformer:- 300 Amp With Complete Accessories 2.14 Pipe Bending Machine:- Hydraulic Type 12 Mm To 30 Mm 2.15 Alternator Assembly Used For Lmv ( Brand New ) :- 12 Volt For Light Motor Vehicle For Study Purpose 2.16 Working Condition Model Of Petrol Mpfi Engine Assembly With Fault Simulation Board:- 4 Stroke , 4 Cylinder 800 Cc To 1500 Cc Engine Should Be Mounted On M.S Sturdy Frame Having Four Wheels For Easy Shifting And A Panel Board Fitted On Frame Having Chester Unit Fitted In Panel Board . Engine Should Start From Panel Board. Brand New Engine With Excise Clearance Certificate The Maximum Parts And Accessories Like, Three Cylinder, Cylinder Head, Inlet And Exhaust Manifolds, Carburettor, Oil Pump, Fuel Pump, Distributor, Self Starter, Water Pump Etc., Are Sectioned To Show The Internal Constructional Details. Miniature Bulbs Are Provided With Each Spark Plug, To Show The Sequence Of Firing Order While The Engine Is Run For Demonstration, Mounted On A Sturdy Iron Frame, Coupled To A 1 / 4 H.P. Single Phase, 220 / 230V Ac Motor, Through A Reduction Drive Unit, To Get The Slow Speed Rotation Of The Flywheel And The Engine. ( Around 15 To 20 Rpm ) . The Operation Of Gearbox Assembly And Clutch Assembly Can Be Demonstrated Using The Levers Provided. ( With Concerned Tool Kit ) ( Brand New With Excise Clearness ) 2.17 Fuel Feed Pumps:- Fuel Feed Pumps Of Gypsy And Maruti 800 ( Brand New, Latest Model ) 2.18 Working Model Of Power Windows:- Made Out Of Original Parts, Will Be Suitably Sectioned And Arranged To Demonstrate The Internal Construction Details Showing The Minute Information Such As Motor And Its Gear Arrangement Etc., And Working Of The Same Can Be Show By Connecting It To A Battery, The Model Will Be Suitably Painted And The Entire Model Is Mounted On A Sturdy Iron Frame Along With Sealed Maintenance Free Battery For Operation ( All The Parts Should Be New. No Second Hand Part To Be Used ) 2.19 4 Stroke Motor Cycle Engine :- Made Out Of Full Size Original 4 Stroke Motor Cycle Engine, Gear Box, Clutch Etc The Engine Is Fitted With Entire System Such As Clutch, Gear Box With Maximum Parts And Accessories Of The Engine Like Piston, Self-Starter, Silencer Are Sectioned To Clearly Demonstrate The Internal Constructional Details. The Gearbox Will Be Suitable Sectioned To Demonstrate The Gear Mechanism And Will Be Coupled To The Engine Assembly Through The Clutch So That By Working The Engine The Entire System Of Engine To Clutch And Gear Box Can Be Demonstrated Working. The Whole System Is Mounted On To A Sturdy Iron Frame, And The Frame Will Be Provided With Caster Wheels For Easy Movement Of The Entire Model. Suitable Colour Imported Painting Will Be Carried Out Along With Miracle Coating For The Model Will Be Done For Extra Gloss And Shine. The Painting Will Be Carried Out In Such A Way That Different Colours Will Be Use For Different Components Such As Air, Oil, Petrol, Exhaust Identification Of Sectioned Area Etc According To The Colour Code For Easy Identification Of Different Systems And Mechanisms. All The Hardware’S And Gears Will Be Suitably Electroplated. A Switch Box With Indicator Switch Should Be Provided. Engine Should Be Mounted On M.S Sturdy Frame Having Four Wheels For Easy Shifting And A Panel Board Fitted On Frame Having Chester Unit Fitted In Panel Board. Engine Should Start From Panel Board. Brand New Engine With Excise Clearance Certificate. ( With Concerned Tool Kit ) ( Brand New With Excise Clearness ) 2.2 Four Stroke Petrol Engine With Cng Setup In Working Condition:- A Latest Cng Model 4 Stroke Petrol Engine Brand New Supported By Excise Clearance Petrol Engine Of Reputed Make With All Accessories, Battery 12 Volt Reputed Brand, Panel Board With Warning Instruments Such As Starting Switch, Speed Control Lever. Engine Should Be Mounted On C – Channel Frame Spray Painted Machine With Tyres For Easy Shifting, Manual Should Be Provided With Details Of Machine, Accessories, Components Mounted. The Maximum Parts And Accessories Like, Three Cylinder, Cylinder Head, Inlet And Exhaust Manifolds, Self Starter, Water Pump Etc., Are Sectioned To Show The Internal Constructional Details. Miniature Bulbs Are Provided With Each Spark Plug, To Show The Sequence Of Firing Order While The Engine Is Run For Demonstration, Mounted On A Sturdy Iron Frame, Coupled To A 1 / 4 H.P. Single Phase, 220 / 230V Ac Motor, Through A Reduction Drive Unit, To Get The Slow Speed Rotation Of The Flywheel And The Engine. ( Around 15 To 20 Rpm ) . The Operation Of Gearbox Assembly And Clutch Assembly Can Be Demonstrated Using The Levers Provided. ( With Concerned Tool Kit ) ( Brand New With Excise Clearness ) 2.21 Functional / Experimental Model Of Different Type Of Sensors :- This Open Demonstration Board Is Made Out Of Original Parts With Necessary Wiring Connections To Show The Circuit Connections. The Entire System Will Be Suitably Sectioned And Mounted On Navopan Board. 2.22 Air Bag Simulator ( Brand New ) :- Reputed Brand Only 2.23 Diesel Engine Compressor Tester Kit:- Gauge Range:0-1000 Psi / 0-70 Bar 2.24 Cylinder Liners Dry And Wet Liners:- Press Fit And Slide Fit Liners. 2.25 Different Type Of Pistons Model:- Different Type Of Pistons Model For Motor Cycle Engine, Light Motor Vehicle Engine And Heavy Commercial Vehicle 2.26 Fuel Injecting Pump ( Diesel ) In Line / Rotary:- Fuel Injecting Pump ( Diesel ) In Line / Rotary Four Cylinder Engine 2.27 Fuel Injecting Pump Dismantling Tool Kit:- Fuel Injecting Pump Dismantling Tool Kit Complete Kit 2.28 Arbor Press Hand Operated:- Arbour Press Hand Operated Capacity 2 Ton )
