Electricity Distribution And Control Apparatus - Tmok Tmkk Controller 4G Gsm Radio Rtu. Purchase Framework Agreement The Purchase Of 4G Gsm Rtu Rtu In 1 Part Of The Kbt. Under Article 105 (1) (A), A Total Of Up To 300 Tmok, 1-Field Tmkk, 2-Field Tmkk, 3-Field Tmkk Rtu Is Expected At The Same Time As The Framework Procedure. The Task Is To Deliver, On -Site Installation, Fitting And Commissioning Of Complete Telemechanics Equipment For Designated Ok Or Kk Equipment, And Integration Of The Existing Scada System. In All Cases, Telemechanics Control Cabinets Are Transported By The Winning Tenderer To The Designated Installation Site And Equipped With His Own Experts And Tools. Specific Holders Needed To Install And Install The Control Cabinet Must Be Transported To The Winner Tenderer. The Transported Telemechanical Control Cabinet Should Be Suitable For Controlling The Closed Gas-Filled Column Switch (K) Abb Sectos, Schneider Pm6 Or Zpue, And The Two Equipment Must Form A Functional Unit. In Addition, It Is Necessary To Process The Marks On The Column Switch, To Determine The Short Circuit And To Transmit Current Measurement Data To The Scada. For The 24V Dc Motor -Driven Compact Kk Switching Equipment In The Designated Locations, The Task Is To Build The Full Control, Process The Signposts, And Transmit The Current Measurement Data To The Scada With The Delimited And Fitted Telemechanics Control Cabinets. For Each Telemechanical Control Cabinet To Be Installed, You Need To Build The Entire Communication Route All The Way To The Scada System. It Should Be Ensured The Fit Of The Telemechanical Control Cabinets Installed Into The Scada System And The Transfer Of The Necessary Databases To The Customer In The Appropriate Format. The Equipment Whose Full Control And Operation Tests Have Been Driven From The Scada System Should Be Considered Ready. It Is The Responsibility Of The Tenderer To Transport The Collector Necessary For The Scada Fitting After Consultation With The Contracting Authority. The Tmok-Tmkk Equipment And The Collector Are Located In A Dedicated Apn Network, The Scada Communicates Directly With The Collector As Rtu, Through A Standard Iec 60870-5-104 Protocol. It Is Responsible For Designing The Apn Network And Providing The Necessary Sim Cards. The Contracting Authority Provides The Collector A Virtual Machine (Windows Or Linux Operating System) If Necessary. The 4G Gsm Radio Units Have A Dedicated Sim Card Id. The Devices Are Connected To The Central Server On A Special Closed Apn Network. Each Device Can Only Be Connected To The Server, And Communication Options Should Be Banned. The Tented Ted
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
