3 The Second Tranche Of Delivery Must Be Carried Out In Accordance With The Employers Demand From 01/08/2025. Until 31.08.2025 The Third Tranche Of Delivery Must Be Carried Out In Accordance With The Employers Demand From 01.10.2025. Until 31/10/2025 The 4Th Tranche Of Delivery Must Be Made In Accordance With The Employers Demand From 10.01.2026. Until 31.01.2026 2. The Subject Of The Contract Applies To The Supply Of Municipal Waste Containers With A Capacity Of 120, 240 And 1100 Liters In An Estimated Total Amount: Characteristics Of Containers:- Factory New, Unused, Without Damage,- Made Of Plastic High-Density Low-Pressure Polyethylene (Pe-Hd),- Capacity:- Capacity [Kg]: 120 L- Min. 60 Kg, 240 L - Min. 110 Kg, 1100 L - Min. 510 Kg, - 1100L: A Cover Divided In A 1/3 To 2/3 System Adapted For Disabled People, With A System That Protects Against Finger Sticking And Protection Against Rainwater, - In Colors: Green Ral 6011 Or 6025 With The Inscription Glass, Black Ral 7016 Or 7021 With The Inscription Mixed Waste, Brown Ral 8025, 8024, Or 8011 Bio, Blue Ral 5005, 5015 Or 5007 With The Inscription Paper, Yellow Ral 1018 Or 1021 With The Inscription Metals And Plastics. White Inscriptions Ral 9010. An Inscription With A Height Of Not Less Than 5 Cm, An Inscription In Two Lines Is Allowed;- Made In Accordance With The En 840 Standard (Compliance Certificate Or Statement About Compliance With The Standard For Inspection Of The Ordering Party At Delivery)- Having Pzh Hygienic Certificate, Quality Certificate Ral Gz 951/1 Or Equivalent, (Mandatory Characters In The Container) (Certificate To The Container), (Certificate Accessing The Ordering Party On Delivery); - Ce Quality Mark, - Made Using The Injection Method Made Of High Mechanical Strength And Resistance To Adverse Conditions Of The Atmosphere - Flat Or Convex Cover, - Strengthening Embossing On The Cover, - Min. 2 Strengthening Vertical Reinforcements At The Front And Back, On The Body (In The Case Of 1100L Containers, The Employer Allows The Supply Of Containers Without Embossing On The Walls Of The Body, While The Containers Must Be Equipped With Thicker Walls Of The Body), - Adapted For Assembly Of Identification Devices In The Rfid System, - Emptied Using Standard Release Devices: Lane Combi And Rear Booms (Paws) - Equipped With Durable And Quiet Wheels With A Diameter Of 200 Mm, With Tire Mounted On A Steel Or Galvanized Axle (Four -Wheeled Containers Equipped With 2 Wheels Brakes), The Driving System Must Allow The Transport Of A Given Type Of Container, Taking Into Account At Least The Minimum Validity Specified Above, - Four -Wheeled Water Outflow, - Resistant To Discoloration Under The Influence Of Uv Rays, - Resistant To Low And High Temperatures (Including Frost), - Optimization Of Transport And Storage, The Possibility Of Stacking, - Containers Should Not Contain Elements Harmful To People, Animals And The Environment,
