Article Mz -73.000, Pipe Diameter, Mm - 89, Length, Mm - 535, Mass, Kg - 8.7, Cuffs 85-95-6 Ush Nbr Rubber, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 50 Mm/Nar 73 Steel, Spindle Rotator 2D 146000, Size 85 Mm, Length Up To 100 Cm, The Remote Cylinder Set Of Lifting The Mast, Assembled Urb-2A-2, Breeded Drill Pipes (Ubt) Are Designed To Increase The Stiffness And Increase The Mass Of The Lower Part Of The Drill Column, Through Which The Load On The Loot Is Created. Scroll 146 Mm, Length 4 M, Thread 117 Mm, The Hydraulic Cylinder Of Lifting The Rotator 2-25-10-1 To Urb-2A-2, Piston Rod Nb 32-02-501, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 66 Mm/Bun 117 Steel, Bullet Tap Universal Mbu 32-73, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Interior Size 86 Mm/Nar 117 Steel, Wa-C-C Short, But A Simple But Very Effective And Extremely Necessary Auxiliary Manual Mechanical Tool Used During Drilling Of Gas Or Oil Wells When Installing Or Dismantling The Pipe. The Wa-C Series Model Is Directly Used To Work With Pipes From 3 1/2 To 15 5/8 Inches, That Is, 88.9 ... 396.9 Mm., Bullet Tap Universal Mbu 74-120
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.