Vaqueta Glove, Size 9, Made Of Bovine Leather Tanned To Chromium, Reinforced Between The Thumb And The Indicator, With Or Without Internal Palmar Reinforcement, With Reinforcement Between Thumb And Indicator, With Elastic Embedded In The Back, Sewn With Nylon Line, With An Average Thick 1, 20 Mm And 0, 057 Grams/Cm² Or 0, 57 Kg/M²., Base For Photoelectric Relay, 360 ° Chado Model, With Standard Heat Galvanized Rod Abnt., Galvanized Steel Curved Arm Sae 1020 For Public Lighting With 48, 3 Mm (Outer Diameter), Projection 1, 5 M, Tube Wall 2, 5 Mm, According To Ceips Technical Specifications, Fireplace Curved Arm For Public Lighting Led, With Shoe, 48 Mm Fit (Outer Diameter), 2, 5 M Long Projection And Thickness Tube Wall 2, Insulated Drilling Connector Cdp 70 Main: 10-95 Mm² Derivation: 1, 5 - 10 Mm², Nominal Adjustment Torque: 8 N.M. Mm² Derivation: 4 - 35 Mm²., 1 Screw Parallel Connector., French Screw 5/8 X 70 Galvanized To Fire, With Polka To Fix The Luminaire Arm In The Clamp. 32,000 Hours And Luminous Flow Of 17,290 Lumens. The Proposal Should Be Attached To The Report Of The Procel Seal Granted To This Lamp., 400 W Metal Reactor, External Use 220V 60 Hz With High Power Factor, With Painted Mug Without Relay And Photoelectric. Stamped On The Product. The Proposal Should Be Attached To The Procel Seal Report Granted To This Reactor., 70 W A. P. Voltage 220 V 60 Hz Internal Reactor, Measuring 0, 7 Cm Width X 14, 5 In Length X 0, 7 Cm With Procel Seal Printed On The Product And With Painted Mug. 1200Mm Clamp, With 03 Screws To Fix Lamp, Clamp220mm, Clamp230mm, 250Mm Clamp With 03 Bolts To Fix Lamp., 260Mm Clamp With 03 Screws To Fix Lamp. Luminaire., Carter300mm, Fire Galvanized Ar11 (1 Insulator), Ceee Standard With Roldan Insulator., 220V 50Cv. Contactor 220V 25Cv., 250 W Lamp E40., 400 W Lamp E40. 32,000 Hours And Luminous Flow Of 35,000 Lumens. The Proposal Shall Be Attached To The Procel Seal Report Granted To This Lamp., Public Lamp Ceip-3, Closed For Vsap 100 Watts And 150Watts Lamp, Consisting Of Injected Aluminum Body; Electrostatic Painting With Polyester Powder Paint, Protected Against Uv Rays; Reflector Manufactured In A Single, Chemically And Anodized Printed Aluminum Plate, With A Minimum Thickness Of 1 Mm, With A High Degree Of Purity (99, 5%), With Accommodation For Auxiliary Equipment (Reactor, Capacitor, Ignitor) Based On Electronic Photo Relay; The Reflector Must Be Independent Of The Body Of The Luminaire; Polycarbonate Optical Group Closure Diffuser With A Smooth Injected Uv -Ray Protection And Sealing Joint In Non -Degradable Material; Ro Lamp Door
